Panasonic Kx Tg2382 Operating Instructions Manual

11
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Recharge
Recharge the battery when: 
—“Recharge ” is displayed on the handset,
—“ ” flashes on the display, or
—the handset beeps intermittently while it is in use.
•If you DO NOT recharge the handset battery for more than 15 minutes, the\
 display 
will continually indicate “ Recharge” and/or 
“”will flash when the handset is
lifted off the base unit or the charger.
•If the battery has been discharged, the handset will display “ Charge for...

Belt Clip
12
Headset Jack
Optional Headset
H
Plugging a headset into the handset allows a hands-free phone 
conversation. Please use only the Panasonic KX-TCA88 headset. To
order, call the accessories telephone number on page 2.
Connecting the optional headset to the handset
Open the headset jack cover, and connect the optional headset to the
headset jack as shown below.To switch to the speakerphone while using the headset: 
Press  . To return to the headset, press  .
You can hang the handset on your...

13
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Programmable Settings
How to select a function item from the menu
Make sure the unit is not being used and the handset is lifted off the 
base unit. 
1. Press 
(MU\bE/FUN\f\bION). 
•The main menu is displayed (p. 14).
2. You can scroll through the menu by pressing
Öor Ñ. Scroll to the desired item by
pressing 
Öor Ñ.
3. Press 
áto select the item.
4. If the item has a sub-menu  I, it will be 
displayed. Select the sub-menu item by...

Programmable Settings
14
Useful information:
•“--------------- ” indicates the beginning or end of the function menu.
• You can go back to the previous display by pressing  Üexcept when entering
characters or numbers. To return to the main menu from the sub-menu  Ior 
sub-menu  II, press  Ü.
• You can exit the programming mode any time by pressing  (OFF).
• If you do not press any buttons for 60 seconds, the handset will exit th\
e 
programming mode.
• If the unit detects a problem, an error message will...

15
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Date and Time
“ ” flashes on the base unit display if the clock has 
not been set. The clock needs adjusting.
Voice Day/Time Stamp:During playback, a
synthesized voice will announce the day and time 
that each message was recorded.
Make sure the unit is not being used and the handset is lifted off the b\
ase unit.
1
Press (MU\bE/FUN\f\bION).
2
Scroll to “ Date and time ” by pressing Ö
or Ñ.
3
Press á.
4
Enter the year, and month and day...

Programmable Settings
16
Dialing Mode
If you have touch tone service, set to “Tone”. If rotary or pulse \
service is 
used, set to “Pulse”. Your phone comes from the factory set to “\
Tone”. 
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press (MU\bE/FUN\f\bION).
2
Scroll to “Initial set ” by pressing Öor
Ñ, and press á.
3
Scroll to “Set tel line ” by pressing Ö
or Ñ, and press á.
4
Press áat “Set dial mode ”.
•The current setting is displayed.
5
Select “ Pulse” or...

17
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Line Mode
The line mode is preset at the factory to “B”. Generally leave the\
 line 
mode to “B”. If a change of the line mode setting is required by o\
ur
customer call center or serviceman, change the line mode to “A”.
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press (MU\bE/FUN\f\bION).
2
Scroll to “Initial set ” by pressing Öor
Ñ,and press á.
3
Scroll to “Set tel line ” by pressing Ö
or Ñ.
4...

Programmable Settings
18
Auto Talk Feature
The Auto Talk feature allows you to answer a call by lifting the handset\
 off 
the base unit or the charger without pressing  or  . If you want to
use this feature, turn the feature ON by programming. Your phone comes
from the factory set to OFF. 
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press (MU\bE/FUN\f\bION).
2
Scroll to “Initial set ” by pressing Öor
Ñ.
3
Press á.
4
Scroll to “Auto talk ” by pressing Öor
Ñ.
5...

19
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Ringer Volume
You can program the handset ringer volume to HIGH, MEDIUM, LOW or 
OFF. If set to OFF, the handset will not ring for external calls, and fo\
r
internal calls it will ring at the LOW level. Your phone comes from the
factory set to HIGH. 
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press (MU\bE/FUN\f\bION).
2
Scroll to “Ringer setting ” by
pressing 
Öor Ñ, and press á.
3
Press áat “ Ringer...

Programmable Settings
20
LCD Contrast
You can program the handset LCD contrast (6 levels). Your phone comes 
from the factory set to level 3.
Make sure the unit is not being used and the handset is lifted off the 
base unit.
1
Press (MU\bE/FUN\f\bION).
2
Scroll to “Initial set ” by pressing Öor
Ñ, and press á.
3
Press áat “LCD contrast ”.
4
Select the desired contrast by pressing Ö
or Ñ.
•Each time you press  Öor Ñ , the LCD
contrast will change. 
• The number of steps shows the LCD 
contrast level.
5...