Panasonic Kx Tg2382 Operating Instructions Manual

Preparation
Cordless Telephone
Answering System
Useful Information
2.4GHz Expandable Cordless Phone System
Operating Instructions
Model No.KX-TG2382B
KX-TG2382PW KX-TG2383B 
KX-TG2383S
Pulse-or-tone dialing capability
Model shown is KX-TG2382B.
PLEASE READ BEFORE USE AND SAVE.
Panasonic World Wide Web address:  http://www.panasonic.com 
for customers in the USA or Puerto Rico
Charge the battery for about 15 hours before initial use.
Caller ID Compatible 

2
Thank you for purchasing your new Panasonic cordless telephone.
Please read IMPORTANT SAFETY INSTRUCTIONS on page 
71 before use. Read and understand all instructions.
Caller ID and Call Waiting Service, where available, are telephone compa\
ny 
services. After subscribing to Caller ID, this phone will display a call\
er’s name
and phone number. Call Waiting Caller ID, which displays a second caller\
’s
name and phone number while the user is on the phone line with the first caller,
requires a...

3For assistance, please call: 1-800-211-PANA(7262)For assistance, please call: 1-800-211-PANA(7262)
For KX-TG2382B/KX-TG2382PW users
KX-TG2382B/KX-TG2382PW includes two handsets and one base unit. You can 
expand the system by adding up to one additional handset. A maximum of 3\
handsets can be registered to the base unit. The included handsets are pre-
registered at the factory and assigned the extension numbers 1 and 2. 
If you purchase accessory handsets, you must register each to the base u\
nit....

Contents
4
Preparation
For Best Performance........................................................................\
 6
Location of Controls ........................................................................\
.. 7
Installation ........................................................................\
.................. 9
Connections ........................................................................\
.............. 9 
Installing the Battery in the Handset...

Transferring a Call........................................................................\
......44
Conference Calls ........................................................................\
........45
Call Share ........................................................................\
....................45
Special Features ........................................................................\
.........46
Temporary Tone Dialing (For Rotary or Pulse Service Users)  ........46 
Muting Your...

For Best Performance
6
Battery charge
A rechargeable Ni-MH battery powers 
the handset. Charge the battery for
about 15 hours before initial use (p. 10).
Base unit location/Noise
Calls are transmitted between the base unit and the handset using
wireless radio waves.  For maximum distance and noise-free operation ,
the recommended base unit location is: 
Note:
While using the handset: 
• If you are near a microwave oven which is being used, noise may be heard\
 from
the receiver or the speaker. Move away...

7
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Charger unit
CHARGE Indicator (p. 10) 
Charge Contacts (p. 11) 
CHARGE 
GEE
XPA NDA BLE  T
O 3
Location of Controls
Base unit
KX-
TG2 382
G
REE
GREE
TI
N
G
INGR
EC
REC C
HEC
K
CHECK E
R
ASE
ERASE
REPEAT 
REPEAT
SKIP
SKIPSTO PM ES SAG E PL 
E PL AY BACK
BACK
CHARGE 
CHARGE  IN USE  
  IN USE   HOLD 
HOLD 
VOLUME
VOLUME
E XPAN D ABLE  TO  31 2
3HANDSE 
HANDSET LOC
T LOCATOR
TOR INT
INTERCOM
ERCOM
MIC
A LL
1 2
3HANDSE 
HANDSET LOC
T LOCATOR
TOR...

Location of Controls
8Handset
CALL  
CALL 
WAIT 
IT 
CLEAR 
CLEAR
S P -
P H O NEINTERCOM  
INTERCOM 
R
ED IA L
REDIALFUNCTION 
FUNCTION
T
O NE
TONE
T ALK 
ALKE D ITHOLD 
HOLD
O FF
OFF
FL ASH 
ASHMU
MU TEPA U
SE
USE
23
4561
78
0
9
Back side
Speaker
    
Antenna 
Display
(MU\bE/FUN\f\bION) 
Button (p. 13, 15, 46) 
  
(FLASH/\fALL!WAI\b) Button
(p. 46, 47)  
 
(OFF) Button 
(p. 13, 25, 31, 39)  
(HOLD/IN\bER\fOM/\fLEAR)\H
 
Button
(PAUSE/REDIAL) Button 
(p. 27, 47) 
 
(*)
 
(TONE) Button (p. 46) 
Headset...

9
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Installation
Connections
Base unit 
Charger unit
•USE ONLY WITH Panasonic AC ADAPTOR PQLV10 (Order No. PQLV10Z).
• The AC adaptor must remain connected at all times. (It is normal for th\
e adaptor 
to feel warm during use.)
• To connect a standard telephone on the same line, see page 60.
• If your unit is connected to a PBX which does not support Caller ID serv\
ices, you
cannot access those services.
Raise the 
antenna.
Fasten the cords to...

Installation
10
Installing the Battery in the Handset
Insert the battery into the handset as shown, matching the correct polar\
ity 
(# ). Press the battery down until it fits securely into the compartment\
 ( $). 
When finished, close the cover.
1
2
CHARGE IndicatorCHARGE Indicator
OR AND
Battery Charge
Place the handsets on the base unit and the charger, then charge for 
about 15 hours before initial use.
•The CHARGE indicator on the base unit or the
charger will light, a beep will sound and 
“ Charging...