Panasonic Kx Tg2344 Operating Instructions Manual

Useful Information
For assistance, please call: 1-800-211-PANA(7262)61
Belt Clip
You can hang the handset on your belt or pocket using the included belt clip.
To attach the belt clip To remove the belt clip  
Optional Headset
Connecting an optional headset to the handset allows hands-free phone 
conversation. Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, 
KX-TCA88HA, KX-TCA91, KX-TCA92, or KX-TCA98 headset. To order, call the 
accessories telephone number on page 2.
Connecting an optional...

62
Direct Commands
After pressing [MENU], you can also program menu items directly by pressing ([0] 
to [9], and [#]) instead of using the soft keys.
Menu item Command Selection items Page
Ringer volume[1] [1]  [0] : Off  [1] : Low  [2] : Medium   
[3] : Highp. 17
Ringer tone [1] [2] [1]–[3] :Tone pattern 1–3 
[4]–[7] : Melody pattern 1–4p. 18
Incoming call tone[1] [3]  [1] : On  [2] : Twice  [0] : Off p. 47
Message play[2]p. 52
Date and time [4]Go to Step 3 on page 14. —
Voice enhancer[5] [1] : On  [0]...

For assistance, please call: 1-800-211-PANA(7262)63
Direct Commands
Useful Information
During programming:
When “Save” is displayed, press the right soft key to save the new settings.
To exit programming, press [OFF].
• If you press the direct command incorrectly, press [OFF], then re-enter 
programming mode by pressing [MENU].
• For function details, see the corresponding pages.
*
1Can be used to activate Caller IQ. See the leaflet included with this unit for more 
information.
*
2For openLCR...

64
If the Following  Appear on Your Display...
The following will be displayed when the unit needs your attention.
Display message Cause & Remedy
Recharge battery• The battery needs to be charged. Recharge the 
battery (p. 10).
Charge for 6h• The battery has been discharged. The handset will 
not work. Fully charge the battery (p. 10).
No link to base.
Move closer to 
base, try again.• The handset has lost communication with the base 
unit. Walk closer to the base unit and try again or 
re-register the...

For assistance, please call: 1-800-211-PANA(7262)65
If the Following  Appear on Your Display...
Useful Information
---Incomplete---
Phone book full• When phone book item(s) was(were) sent to another 
handset, the phone book memory was full and 
copying stopped. Press [OFF] to exit (p. 39, 40). To 
erase items from another handset phone book, see 
page 38. You can copy all of the items again or copy 
the items which have not been copied one by one 
(p. 39, 40).
Example
Tom Jones
555-765-4321• When you...

66
Troubleshooting
If the handset display shows error messages, see “If the Following Appear on 
Your Display...” (p. 64–65) for the Cause & Remedy.
Telephone System
Problem Cause & Remedy
“No link to base. Move 
closer to base, try 
again.” is displayed and an 
alarm tone sounds.• You are too far from the base unit. Walk closer 
to the base unit.
• Confirm the base unit’s AC adaptor is plugged 
in.
• Raise the base unit antenna.
• If the above remedies do not solve the 
problem, the handset may have...

For assistance, please call: 1-800-211-PANA(7262)67
Troubleshooting
Useful Information
Answering System  
You cannot make long 
distance calls.• Please make sure you have long distance 
service.
• Check if Caller IQ is on. Turn Caller IQ off 
(p. 70).
The handset does not display 
the caller’s name and/or 
phone number.• You need to subscribe to Caller ID.
• Other telephone equipment may be interfering 
with your phone. Disconnect it and try again.
• Other electrical appliances connected to the 
same...

Troubleshooting
68
General 
“ ” flashes and the 
ANSWER ON indicator 
flashes rapidly. No new 
messages are recorded.• Memory is full. Erase unnecessary messages 
(p. 54).
You cannot operate the 
Answering System from the 
base unit or the handset.• If another user is in use, you may not be able 
to operate the Answering System. Try again 
later.
• If another user is listening to messages or the 
Answering System is handling a call, you 
cannot operate the Answering System. Try 
again later.
You cannot...

For assistance, please call: 1-800-211-PANA(7262)69
Troubleshooting
Useful Information
openLCR Service for Caller IQ
“Recharge battery” is 
displayed, “7” flashes, or 
the handset beeps 
intermittently.• Fully charge the battery (p. 10).
“Charge for 6h” and 
“8” are displayed and the 
handset does not work.• The battery has been discharged. Fully charge 
the battery (p. 10).
• Check battery installation (p. 10).
You charged the battery fully, 
but “Recharge battery” is 
still displayed and/or “7”...

70
openLCR Service for Caller IQ
This unit is compatible with services provided by openLCR.
Important:
• If you have any questions regarding the openLCR service, call openLCR’s 
customer service department at 1-866-openLCR(1-866-673-6527).
• NEITHER PANASONIC COMMUNICATIONS CO., LTD. (PCC) NOR 
MATSUSHITA ELECTRIC CORPORATION OF AMERICA (MECA) IS IN ANY 
WAY AFFILIATED WITH, OR RESPONSIBLE FOR THE ACTS OR OMISSIONS 
OF, OPENLCR.COM, INC. (OPENLCR). NEITHER PCC NOR MECA NOR ANY 
OF THEIR EMPLOYEES OR...