Panasonic Kx Tg2344 Operating Instructions Manual

Answering System
For assistance, please call: 1-800-211-PANA(7262)51
Listening to Messages
Using the Base Unit 
You can see the total number of recorded messages on the base unit display. If the 
NEW MESSAGE indicator flashes on the base unit, new messages have been 
recorded. 
To play back messages 
Press [MESSAGE].  
• The unit announces the number of new 
messages and only new messages are played 
back.
• When you have no new messages, the unit 
announces “No new messages. All message 
playback” and...

Listening to Messages
52
Using the Handset (Remote Operation) 
If “New message” is displayed on the handset, new messages have been 
recorded. 
• If the Message Alert is turned on (p. 22), the Ringer/Message Alert indicator on 
the handset will flash slowly when new messages have been recorded and the 
handset is not in use.
To play back messages  
• If a call is received during playback, the unit rings and playback stops. To answer 
the call, press [C] or [s]. For playback, start again from the...

For assistance, please call: 1-800-211-PANA(7262)53
Listening to Messages
Answering System
During playback   
For Caller ID service users (p. 27)
During playback using the handset, the handset display will show the name 
and/or number of the caller whose message is being played.
To call back the displayed number:
1. During playback, press [MENU].
2. Press Call, [C] or [s].
• The unit stops playback and dials the phone number.
• If you need to edit the phone number to call back, see page 30.
To adjust the...

54
Erasing Messages
The unit will announce the remaining recording time after playback if it is less than 
3 minutes. 
New messages cannot be recorded when:
—“Memory full” is heard.
—“ ” flashes on the base unit.
—the ANSWER ON indicator flashes rapidly (when the Answering System is on).
Erase unnecessary messages. We recommend you erase unnecessary messages 
after each playback.
Erasing a specific message
Press [ERASE] while the message you want 
to erase is being played.
• The unit beeps, then plays...

Answering System
For assistance, please call: 1-800-211-PANA(7262)55
Remote Operation from a Touch Tone Phone
While outside, you can operate the Answering System from any touch tone phone. 
A synthesized voice menu will guide you through the Answering System (p. 57).
• To skip the voice menu and operate the unit directly, see page 58.
Summary of remote operation
• The unit will announce the remaining recording time after playback if it is less than 
3 minutes.
• The messages are saved.
* If “No new...

Remote Operation from a Touch Tone Phone
56
Remote Code 
The remote code prevents unauthorized people from accessing your unit and 
listening to your messages. Choose any 2-digit number (00–99) for your remote 
code. The factory preset remote code is “11”. If you do not program your own 
remote code, you can use “11”. 
To confirm the remote code, repeat steps 1 to 4. 
• The remote code is displayed. When finished, press [OFF].
1Press [MENU].
2Scroll to “Initial setting” by pressing [d] 
or [
B], then...

Remote Operation from a Touch Tone Phone
For assistance, please call: 1-800-211-PANA(7262)57
Answering System
Vo i c e  M e n u
The shaded parts are voice prompts.
• 3 seconds after playback, the voice menu will start again from the beginning.
• The unit will announce the remaining recording time after playback if it is less than 
3 minutes.
• If you hear “Memory full” after playback, erase unnecessary messages (p. 58).
• If you do not press any buttons within 10 seconds after a voice prompt, “Thank you...

Remote Operation from a Touch Tone Phone
58
Direct Remote Operation
Once you have entered the remote code, you can also control your unit by direct 
commands instead of using the voice menu. To end remote operation, hang up at 
anytime.
Direct commands
To turn on the Answering System:
Call your unit and wait for 15 rings.
• The unit will answer and the greeting will be played.
• The Answering System will be turned on. Hang up or enter the remote code for 
other options.
• When turning on the Answering...

Useful Information
For assistance, please call: 1-800-211-PANA(7262)59
Wall Mounting
This unit can be mounted on a wall phone plate.
Base unit
1
Press the tabs in the direction 
of the arrows (1), then remove 
the wall mounting adaptor (2).
2Connect the AC adaptor.
• Fasten the AC adaptor cord to 
prevent it from being 
disconnected.
 
3Tuck the telephone line cord 
inside the wall mounting 
adaptor, then push the adaptor 
in the direction of the arrows 
(1 and 2) while pressing the 
tabs.
• The word “UP...

Wall Mounting
60
Charger unit
The charger can be wall mounted. Connect the AC adaptor. Install screws using the 
wall template (see below). Mount the charger (
1). Slide it down (2), then slide it 
down to the right (
3) until it is secured.
Wall Template for the Charger unit
2
3
1
To  P o w e r  
Outlet  Screws 
2.45 cm
(31/32)
2.45 cm
(31/32)
PQQX13990YA.book  60 ページ  ２００４年１月２６日　月曜日　午前８時２８分