Panasonic Kx Tg2335 Operating Instructions Manual

For assistance, please call: 1-800-211-PANA(7262)21
Making Calls
Basic Operation
Voice Enhancer Technology
Panasonic’s Voice Enhancer Technology clarifies the voice of the person you are 
talking to, reproducing a more natural-sounding voice that is easier to hear and 
understand.
Voice Enhancer Technology can be turned on or off. The factory preset is OFF. 
• Depending on the condition and quality of your telephone line, this feature may 
emphasize existing line noise. If it becomes difficult to hear,...

Making Calls
22
Using the Base Unit 
• To switch to the handset while using the base unit speakerphone:
— If the handset is off the base unit, press [C]
 or [s] on the handset, then press 
[SP-PHONE] on the base unit.
— If the handset is on the base unit, just lift up.
To adjust the speaker volume during a conversation
To increase volume, press VOLUME [>].
To decrease volume, press VOLUME [

Basic Operation
For assistance, please call: 1-800-211-PANA(7262)23
Answering Calls
When a call is received, the unit rings, “Incoming call” is displayed, and the 
Ringer/Message Alert indicator on the handset and the IN USE indicator on the 
base unit flash rapidly. If you subscribe to Caller ID, see page 24.
Auto Talk
If the Auto Talk feature is turned on (p.14), you can answer a call by simply lifting 
the handset off the base unit.
Temporary ringer off
You can turn the ringer off temporarily by...

24
Caller ID Service
This unit is compatible with Caller ID services offered by your telephone company. If 
you subscribe to Caller ID, caller names and phone numbers will be displayed and 
recorded in the Caller List.
How Caller ID information is displayed and announced
When a call comes in, the unit will ring and Caller ID 
information will be received. The handset display will 
show the caller’s information, then the handset and base 
unit will announce the displayed name (ex. “Call from 
ROBINSON,...

Caller ID Service
Basic Operation
For assistance, please call: 1-800-211-PANA(7262)25
Talking Caller ID
To use this feature, you need to subscribe to Caller ID. For further information, 
please contact your telephone company.
• If the unit does not receive Caller ID information, the unit will announce “Call from 
out of area”, “Call from private caller”, or “Call from long distance”. If a call is received 
from an area where name display service is not available, “Number available” will 
be announced.
•...

26
Caller ID Service
Base unit Talking Caller ID feature   
This feature must be turned on or off for the base unit by using the handset.  
Using the Caller List
The unit can record information up to 50 different callers and store this information 
in the Caller List. Caller information is sorted by the most recent call to the oldest. 
When the 51
st call is received, the information from the 1st call is deleted.
The unit will also tell you how many calls you missed while you were out or 
unavailable to...

Using the Caller List
Basic Operation
For assistance, please call: 1-800-211-PANA(7262)27
Viewing the Caller List   
• If there is no name information for a caller, the display will only show the phone 
number.
• If you do not press any buttons for 60 seconds, the unit will exit the Caller List.
What “,” means
“,” indicates you have already viewed this calling 
information or answered the call. If the same caller calls 
again, the call entry with the “,” will be replaced with the 
new call entry.
If a...

Using the Caller List
28
Editing the Caller’s Phone Number 
You can edit a phone number in the Caller List by removing its area code and/or the 
long distance code “1”.
Once you call back an edited number, this unit can automatically edit incoming 
phone numbers from the same area code in the Caller List and each time you 
receive a call (Caller ID Number Auto Edit, page 29).
1Press Rcvd calls, [d], or [B] to enter the Caller List.
2Scroll to the desired caller by pressing [d] or 
[
B].
3Press Select....

Using the Caller List
Basic Operation
For assistance, please call: 1-800-211-PANA(7262)29
Caller ID Number Auto Edit 
Once you call back an edited number (p. 28), this unit can automatically edit 
incoming phone numbers from the same area code in the Caller List and each time 
you receive a call. For example, it can ignore the area code of calls originating from 
your area code, so that you can call these numbers from the Caller List without 
dialing the area code.
To activate this feature, you must edit...

Using the Caller List
30
Storing Caller Information in the Phone Book 
Caller names and phone numbers that are in the Caller List can be stored in the 
phone book.  
• You cannot store Caller List item in the phone book if a phone number is not 
displayed.
1Press Rcvd calls, [d], or [B] to enter the 
Caller List.
2Scroll to the desired caller by pressing [d] or 
[
B].
3Press Select.
• If the number requires editing, see page 28.
4Press Save.
• If there is no name information for the caller, 
“Enter name”...