Panasonic Kx Tg2267 Operating Instructions Manual

41For assistance, please call: 1-800-211-PANA(7262)
1
Press Üor áto enter the directory list.
2
Press Öor Ñ.
•The first item is displayed.
3
Scroll to the desired item that you want to
dial by pressing 
Öor Ñ.
•To search for the item by initial, see page 40.
4
Press or .
•The number is dialed automatically.
•You can also press a line button instead of 
.
5
To hang up, press (OFF)or place the
handset on the base unit.
•You can exit the directory list any time by pressing (OFF).
Directory list
GF
H...

Editing
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press Üor áto enter the directory list.
2
Press Öor Ñ.
•The first item is displayed.
3
Scroll to the directory item you want to
change by pressing 
Öor Ñ, and press
á.
•To search for the item by initial, see page 40.
•If you do not need to change the name, go to
step 5.
4
Edit the name using the dialing buttons, 
Üor á(p. 38), up to 15 characters.
5
Press Ö(Nextkey).
6
Add a number to the current number.
•If you do...

43For assistance, please call: 1-800-211-PANA(7262)
Erasing
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press Üor áto enter the directory list.
2
Press Öor Ñ.
•The first item is displayed.
3
Scroll to the directory item that you want to
erase by pressing 
Öor Ñ.
•To search for the item by initial, see page 40.
4
Press (HOLD/FUNCTION/CLEAR).
•To stop erasing, press Ü(Nokey).
5
Press á(Yeskey) or
(HOLD/FUNCTION/CLEAR).
•A beep sounds and the item is erased.
•To erase...

Voice mail service is an electronic on-line answering system offered by
your telephone company. After subscribing, the voice mail system can
answer calls automatically for you when your line is busy or if calls are not
answered, and caller can leave their messages at the voice mail box
virtually located at the telephone company. After the voice mail box
having received messages, the unit will indicate it in two ways: 
(a) “Voice mail” with the line(s) which received message(s) displayed
on the handset,...

*For quick access to your voice mail box by using
(FLASH/CALL!WAIT/VOICE!MAIL), you may add pauses between your voice
mail box access number and your mail box password in step 7.
EX. 1-222-333-4444 PPPP 8888
Your voice mail box access number  Your mail box password
Pauses
Pressing (REDIAL/PAUSE)once creates a 3.5 seconds delay and counts as
one digit. The delay time depends on a telephone company.
4
Scroll to “Save VM acces#” by pressing
Öor Ñ. 
5
Press á.
6
Press Ö(Line 1) or Ñ(Line 2) to select
the...

46
Voice Mail Service
1
Press (HOLD/FUNCTION/CLEAR).
2
Scroll to “Program” by pressing Öor Ñ,
and press 
á.
3
Scroll to “VM tone detect” by pressing
Öor Ñ.
4
Press á.
5
Press Ö(Line 1) or Ñ(Line 2) to select
the line.
•The line’s current setting will be displayed.
6
Select “Off” or “On” by pressing Öor Ñ.
7
Press á(Savekey).
•A beep sounds.
•To program the other line, start again from step 3.
•To exit the programming mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF)....

47For assistance, please call: 1-800-211-PANA(7262) •If “Voice mail” still remains on the display or the VM indicator still flashes even
if you have listened to your voice mail message(s), press
(HOLD/FUNCTION/CLEAR), and press and hold (HOLD/FUNCTION/CLEAR)
until the unit beeps. “Voice mail” will disappear and the VM indicator will turn
off.
•If your voice mail service uses a voice mail tone and the recorded message is
over 3 minutes long, “Voice mail” may not be displayed and the VM indicator
may not...

To answer a second call
1
Press
(HOLD/FUNCTION/CLEAR)to
put the first call (LINE 1) on
hold.
•The LINE 1 status indication 
flashes and the unit rings.
•The LINE 2 status indication
flashes quickly.
2
Press the other line button
(LINE 2) to answer a second
call.
•The LINE 1 status indication is
flashes and the LINE 2 status
indication is displayed.
3
To return to the first call
(LINE 1), press the line button
for the first call (LINE 1).
•The second call is terminated.
EX: If you are using LINE 1
To make...

[L1][L2]H=Mute
Conference
00-00-00
EX: If you are using LINE 1
To make a second call
1
Press
(HOLD/FUNCTION/CLEAR)to
put the first call (LINE 1) on
hold.
•The LINE 1 status indication
flashes.
2
Press the other line button
(LINE 2) and dial a phone
number.
•The LINE 2 status indication is
displayed.
3
When the other party
answers, press 
(CONF)to
make a conference call.
•Both line status indications are
displayed.
To answer a second call
1
Press
(HOLD/FUNCTION/CLEAR)to
put the first call (LINE 1) on...

50
Special Features
(FLASH/CALL!WAIT/VOICE!MAIL)
(TONE)(OFF)
(REDIAL/PAUSE)
    ,     ,
(HOLD/FUNCTION/CLEAR)
(HANDSET!LOCATOR)
CHARGE/LOCATOR Indicator
Automatic Security Code Setting
Each time you place the handset on the base unit, the unit automatically
selects one of more than a million security codes. These codes help
prevent the unauthorized use of your telephone line by another cordless
telephone user.
Handset Locator
You can locate the handset or page the handset user with beep tones
from the...