Panasonic Kx Tg2267 Operating Instructions Manual

21
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Ringer Tone
You can select the handset ringer tone out of 6 patterns for each line. When
a call is being received on the line, the handset rings in the selected tone.
LINE 1 is preset to “1”. LINE 2 is preset to “2”.
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press (HOLD/FUNCTION/CLEAR).
2
Scroll to “Ringer tone”by pressingÖor
Ñ.
3
Press á.
4
Press Ö(Line1) or Ñ(Line2) to 
select the line.
•The...

22
LCD Contrast
You can program the handset LCD contrast (5 levels). To make the
handset display clearer, set to high level. Your phone comes from the
factory set to level 3.
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press (HOLD/FUNCTION/CLEAR).
2
Scroll to “Program” by pressing Öor Ñ.
3
Press á.
4
Scroll to “LCD contrast” by pressing Ö
or Ñ.
5
Pressá.
6
Select the desired contrast by pressing Ö
or Ñ.
•Each time you press Öor Ñ, the LCD
contrast will change. 
7...

1
Press .
•A free line is automatically selected and the line
status indication is displayed.
•To change the line selection, see page 54.
2
Dial a phone number.
•The dialed number is displayed.
•After a few seconds, the display will show the
length of the call and the battery strength.
3
To hang up, press (OFF)or place the 
handset on the base unit.
•The line status indication goes out.
•If the handset has lost communication with the base unit, 3 beeps sound and “No
link to base Place on cradle and try...

24
Hands-free Digital Duplex Speakerphone
For best performance, please note the following:
•Talk alternately with the other party in a quiet room.
•If the other party has difficulty hearing you, press Öto decrease the speaker
volume.
•If the other party’s voice from the speaker cuts in/out during a conversation,
press Öto decrease the speaker volume.
•While talking using  , you can switch to the hands-free phone
conversation by pressing  . To switch back to the receiver, press  .
To have a hands-free...

To dial after confirming the entered number
1
Dial a phone number.
•If you misdial, press (HOLD/FUNCTION/CLEAR).
One digit is erased. Dial the correct phone number.
2
Press .
•You can select a line by pressing the line button 
instead of  .
OR
To have a hands-free phone conversation,
press  , and when the other party
answers, talk into the microphone.
•After a few seconds, the display will show the 
length of the call and the battery strength.
3
To hang up, press (OFF)or place the handset on the base...

26
Making Calls
To adjust the receiver volume (HIGH, MEDIUM or LOW)
or speaker volume (6 levels) while talking
To increase, press Ñ.
To decrease, press 
Ö.
•The display will return to the length of the call.
While using 
•Each time you press Öor Ñ, the volume
level will change among 3 levels (HIGH,
MEDIUM or LOW). Your phone comes from
the factory set to level MEDIUM.
While using 
•Each time you press Öor Ñ, the volume
level will change among 6 levels. Your phone
comes from the factory set to level 3....

When a call is received, the unit rings and “Incoming call” and the
called line are displayed. The called line status indication on the display
and the LINE indicator on the base unit flashes quickly. The line is
automatically selected when you answer the call. (To change the line
selection, see page 54.) 
If you subscribe to a Caller ID service, the calling party information will be
displayed after the first ring (p. 28). In order to view the Caller ID
information, please wait until the second ring to...

28
Caller ID Service
•If both line receive calls at the same time, each caller’s information will be
displayed alternately.
•Caller information cannot be displayed in the following cases:
•—If the caller dialed from an area which does not provide a Caller ID service, the
display will show “Out of area”.
•—If the caller has requested not to display his/her information, the display will
show “Private caller”.
•If your unit is connected to a PBX which does not support Caller ID services, you
cannot access...

29
Basic Operation
For assistance, please call: 1-800-211-PANA(7262)
1
Press Öor Ñto enter the
Caller List.
•For example, the display will show
the following.
•You can go to the directory list by
pressing á(p. 40).
2
To search from the most
recent call, press 
Ö.
To search from the oldest
call, press 
Ñ.
•To scroll between callers, 
press Öor Ñ.
3
To exit the list, press (OFF). 2 new calls
GF H=Directory
•Once new calls have been checked, “√” will be added.
•If “No items stored” is displayed in step 1,...

30Ex. When you search from the most recent call:
SMITH,JACK 
1-222-333-4444
3:10P JUN10 
Press Öor Ñto enter the Caller List.
Press Ö.
Press 
Ö.
Press 
Ö.
Press 
Ö.
Press 
Ö.To return to the previous caller,
press 
Ñ.
To exit the Caller List,
press 
(OFF).
•If there is no name information for a
caller, the display will only show the
phone number.
2 new calls
GF H=Directory
BROWN,NANCY 
222-3333
1:54P JUN 9 
✕3
TURNER,CINDY 
1-234-456-7890
10:38A JUN 9 √
0 new call
GF H=Directory
Display meaning:
√: You...