Panasonic Kx Tg2267 Operating Instructions Manual

51For assistance, please call: 1-800-211-PANA(7262)
Muting Your Conversation
Pressáwhile talking.
•The indication of mute flashes.
•The other party cannot hear your voice but you can 
hear theirs.
•To release the mute, press áagain.
•When you switch between the receiver and speaker, the mute will be released.
Temporary Tone Dialing
(For Rotary or Pulse Service Users)
Press (TONE)before entering access numbers which require tone dialing.
•The dialing mode changes to tone. You can enter numbers to access...

52
For Call Waiting Service Users
Press (FLASH/CALL!WAIT/VOICE!MAIL)if you hear a call-waiting tone
while talking.
•The first call is put on hold and you can answer the second call.
•To return to the first caller, press (FLASH/CALL!WAIT/VOICE!MAIL)again.
•The call waiting service cannot be used when:
—the first call on the same line is placed on hold, —a parallel connected telephone is in use, or—you are having a conference call on both lines (p. 49).
•If this function does not operate properly, consult...

53For assistance, please call: 1-800-211-PANA(7262)
Selecting the flash time
The flash time depends on your telephone exchange or host PBX. 
You can select the following flash times: “700, 600, 400, 300, 250, 110,
100 or 90 ms (milliseconds)”. Your phone comes from the factory set to
“700 ms”. 
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press (HOLD/FUNCTION/CLEAR).
2
Scroll to “Program” by pressingÖor Ñ.
3
Press á.
4
Press áat “Set flash time”.
5
Press Ö(Line1) or...

54
Line Selection
The unit will automatically select a free line which is not being used by a
parallel connected telephone when you make a call by pressing  or
. The unit will also select the in-coming called line when you answer
the in-coming call. You can change the line selection. 
There are three options as following:
Line 1:Line 1 will be selected.
Line 2:Line 2 will be selected.
Auto :A free line will be selected when making a call. Line 1 has priority.
But when you call back using Caller ID...

Incoming Call Tone 
While one line is being used, you can be informed if another call arrives
on the other line by two tones. This incoming call tone can be set/deleted
by programming. 
On: 
The incoming call tone will be heard for as long as the other line rings.
2: The incoming call tone will only be heard 2 times. 
Off: The incoming call tone will not be heard. 
Your phone comes from the factory set to “2”.
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press...

56
Wall Mounting
This unit can be mounted on a wall phone plate.
2
Connect the AC adaptor.
3
Tuck the telephone line cord inside
the wall mounting adaptor, then
push it in the direction of the arrow.
•The word “UP” should face upward.
1
Push the hook and turn it around.
Turn the hook until a click is heard.
To Power
Outlet 

57
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
4
Connect the telephone line cord.
Mount the unit, then slide down.
•Raise the antenna.
•Fasten the telephone line cord to
prevent it from being disconnected.
5
To charge the handset battery:
Fix the charge contacts (#) and insert
the hook to the handset hole ($).
•The CHARGE/LOCATOR indicator lights.
2
1
Hook
Hole
Hooks
OR 

58
H
You can hang the handset on your belt or pocket using the belt clip.
To attach the belt clip To remove the belt clip
Headset JackThe illustration headset
is a KX-TCA88.
Connecting an optional headset to the handset
Open the headset jack cover, and connect an optional headset to the
headset jack as shown below.
Belt Clip
Plugging an optional headset into the handset allows a hands-free phone
conversation. Please use only a Panasonic KX-TCA88 or KX-TCA90
headset. To order, call the accessories...

59
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Battery Replacement
A nickel cadmium battery that is recyclable powers the
product you have purchased. At the end of its useful life,
under various state and local laws, it is illegal to dispose of
this battery into your municipal waste stream. Please call 
1-800-8-BATTERY for information on how to recycle this
battery. If “Recharge” is displayed and/or “”  flashes after a few telephone
calls even if the battery was fully charged,...

60
Adding Another Phone
This unit will not function during a power failure. To connect a standard
telephone on the same line, use the Panasonic T-adaptor KX-J66.
To order, call the accessories telephone number on page 2.
Standard Telephone
Telephone Line Jack
T-Adaptor (KX-J66)Telephone
Line Cord