Panasonic Kx-Td816e, Kx-td1232e User Manual

7-34SLT and ISDN Telephone Features
C7.2SLT and ISDN Telephone Features
Conditions 
•If you want to return to the held call,press the Register Recall button before the
destination extension answers.
•If the destination extension does not answer the call within twelve rings (default),the
“Transfer Recall”occurs.  If the transferred call is an outside call,it is possible to
select whether the Transfer Recall will go to the initiating extension or to the operator
through System Programming.
•If there is no...

SLT and ISDN Telephone Features7-35
7.2SLT and ISDN Telephone FeaturesC
Call Waiting
While in conversation,a Call Waiting tone informs you that there is a call waiting.  You
can answer the third call by disconnecting or placing the current call on hold.
Setting / Cancelling
1.Lift the handset.
2.Dial the feature number(731).
3.Dial 1or 0.
- 1 :to set
- 0 :to cancel
•You hear a confirmation tone and then a dial tone.
4.Hang up.
To talk to the new caller by terminating the current call
While hearing a Call...

7-36SLT and ISDN Telephone Features
C7.2SLT and ISDN Telephone Features
To talk to the new caller by holding the current call
While hearing a Call Waiting tone;
1.Press the RegisterRecallbutton.
2. Dial the feature number(50).
•The current call is placed on hold.
•You hear a dial tone.
3.Hang up.
4.Lift the handset.
•You can talk to the new caller.
Conditions
•A Call Waiting tone is generated at the extension in the following conditions:
1) When an outside call comes in.
2) When a Doorphone call comes...

SLT and ISDN Telephone Features7-37
7.2SLT and ISDN Telephone FeaturesC
Conference
During a two-party conversation,you can add a third party to make a three-party
conference.
The members of a conference on the line may be three extensions,one extension and two
CO lines,or two extensions and one CO line.
To establish a conference
While having a two-party conversation;
1.Press the RegisterRecallbutton.
•The other party is placed on hold.
2.Dial the phone numberof the third party.
3.Press the...

7-38SLT and ISDN Telephone Features
C7.2SLT and ISDN Telephone Features
Conditions
•You can return to the original party before the third party answers by pressing the
Register Recall button.
•Up to six conference calls are allowed simultaneously.
•When a two-party call is changed to a three-party call and vice versa,a confirmation
tone is sent to all three parties.  Eliminating the tone is programmable.
Programming References
•System Programming — Installation Manual
[990]System Additional...

SLT and ISDN Telephone Features7-39
7.2SLT and ISDN Telephone FeaturesC
Connected Line Identification Restriction (COLR)
Allows you to restrict the presentation of your number to the calling party when you
receive the incoming call.  You can set the calling party not to see your number on the
display.  This feature is an ISDN service.
To restrict or allow the presentation of your number to the calling party
1.Lift the handset.
2.Dial the feature number(58).
3.Dial 1or 0.
- 1 :to restrict
- 0 :to allow...

7-40SLT and ISDN Telephone Features
D7.2SLT and ISDN Telephone Features
Do Not Disturb (DND)
Allows you to prevent other parties from disturbing you.  You can select to send a DND
tone to incoming calls or to transfer an incoming outside call to the assigned extension.
Setting
1.Lift the handset.
2.Dial the feature number(710) and 1.
3.Dial the desired number as follows.
– extension number:for the backup station
– 0:to operator (backup station)
– :no backup
•You hear a confirmation tone and then a dial...

SLT and ISDN Telephone Features7-41
7.2SLT and ISDN Telephone FeaturesD
Conditions
•An incoming outside call (directed by Intercept Routing or DIL 1:1 extension) can be
automatically transferred to the backup station (pre-assigned extension),while all
incoming intercom calls will hear the DND tone.
•If the extension is already set as the destination of the“Call Forwarding,”“Do Not
Disturb (DND)”and “Do Not Disturb for Direct Dial In Calls”features,you cannot
set this feature and when you set this...

7-42SLT and ISDN Telephone Features
D7.2SLT and ISDN Telephone Features
Do Not Disturb for Direct Dialling In Calls
Allows you to set “Do Not Disturb (DND)”feature for Direct Dialling In (DDI) calls.
DDI calls will be transferred to the operator.  The operator cannot set this feature.
Setting / Cancelling
1.Lift the handset.
2.Dial the feature number(54).
3.Dial 1or 0.
- 1 :to set
- 0 :to cancel
•You hear a confirmation tone and then a dial tone.
4.Hang up.
Conditions
•When this feature is set,an...

SLT and ISDN Telephone Features7-43
7.2SLT and ISDN Telephone FeaturesD
Do Not Disturb (DND) Override
Allows you to call an extension even though the “Do Not Disturb (DND)”feature is set.
System Programming is necessary to use this feature.
If you make an intercom call and hear a Do Not Disturb (DND)
tone;
1.Dial 2.
•Wait for an answer.
Conditions
•If you hear a reorder tone after dialling 2,this means the “Do Not Disturb (DND)
Override”feature is not set at your extension.
•You must dial 2 within ten...