Panasonic Kx-Td816e, Kx-td1232e User Manual

7-14SLT and ISDN Telephone Features
C7.2SLT and ISDN Telephone Features
•Setting a new “Call Forwarding”function (All Calls,Busy,Busy/No Answer,etc.)
cancels any other “Call Forwarding”functions and the “Do Not Disturb (DND)”
feature that has been set.
•A floating extension such as MODEM or external pager cannot be programmed as the
forwarding destination.
•Two extensions can set each other as the destination extension.  In this case,the
intercom call to the other party while he/she is absent will not be...

SLT and ISDN Telephone Features7-15
7.2SLT and ISDN Telephone FeaturesC
Call Forwarding — Busy
You can forward calls to another extension when your extension is busy.
Setting
1.Lift the handset.
2.Dial the feature number(710) and 3.
3.Dial the extension numberto which you wish to forward the
call.
•You hear a confirmation tone and then a dial tone.
4.Hang up.
Call Forwarding — No Answer
Your calls are forwarded to another extension when you do not answer the telephone
within a pre-determined time....

7-16SLT and ISDN Telephone Features
C7.2SLT and ISDN Telephone Features
Programming References
•System Programming — Installation Manual
[202]Call Forwarding — No Answer Time
Call Forwarding — Busy / No Answer
You can forward your calls to another extension when your extension is busy or when
you do not answer the telephone within a pre-determined time.
Setting
1.Lift the handset.
2.Dial the feature number(710) and 5.
3.Dial the extension numberto which you wish to forward the
call.
•You hear a...

SLT and ISDN Telephone Features7-17
7.2SLT and ISDN Telephone FeaturesC
Call Forwarding — to CO Line
You can forward your incoming intercom calls to a CO line.  The telephone number of
outside party must be pre-programmed.
Setting
1.Lift the handset.
2.Dial the feature number(710) and 6.
3.Dial the line access code(9 or 81 through 88).
4.Dial the phone numberto which you wish to forward the call.
5.Dial #.
•You hear a confirmation tone and then a dial tone.
6.Hang up.
Conditions
•Up to sixteen digits...

7-18SLT and ISDN Telephone Features
C7.2SLT and ISDN Telephone Features
Call Forwarding — Follow Me
You can set a “Call Forwarding”feature from the destination extension.  This is useful if
you forget to set “Call Forwarding — All Calls”before you leave your desk.
Setting
– at the destination extension;
1.Lift the handset.
2.Dial the feature number(710) and 7.
3.Dial your own extension number.
•You hear a confirmation tone and then a dial tone.
4.Hang up.
Conditions
•This feature can be cancelled at your...

SLT and ISDN Telephone Features7-19
7.2SLT and ISDN Telephone FeaturesC
Call Forwarding — to ISDN Line
The call forwarding to ISDN line feature can be assigned to each extension.
There are the following three types:
– Call Forwarding Unconditional (CFU):All incoming calls to an extension are
transferred to an ISDN line.
– Call Forwarding No Reply (CFNR):An incoming call to an extension is transferred to
an ISDN line when the extension does not answer
before a time that a telephone company assigns.
– Call...

7-20SLT and ISDN Telephone Features
C7.2SLT and ISDN Telephone Features
Call Forwarding — CANCEL
There are two cancelling methods for “Call Forwarding.”The cancellation depends on the
Call Forwarding type that is assigned.
Cancelling Call Forwarding at your (original) extension (except “to ISDNLine”)
1.Lift the handset.
2.Dial the feature number(710) and 0.
•You hear a confirmation tone and then a dial tone.
3.Hang up.
Cancelling Call Forwarding at the destination extension — “Follow Me (All Calls)”only...

SLT and ISDN Telephone Features7-21
7.2SLT and ISDN Telephone FeaturesC
Cancelling “Call Forwarding – to ISDN Line”at your (original) extension
1.Lift thehandset.
2.Dial the feature number(710).
3.Dial 920,930,940or 90.
– 920 :CFU
– 930 :CFB
– 940 :CFNR
– 90 :all
4.Dial your multi subscriber number(MSN) and press #.
•You hear a confirmation tone and then a dial tone.
5.Hang up.
5 1
2
3
4
your MSN + #or
or
or 

7-22SLT and ISDN Telephone Features
C7.2SLT and ISDN Telephone Features
Call Hold
Allows you to place an intercom or an outside call on hold.
To place a call on hold
While having a conversation;
1.Press the RegisterRecallbutton.
2.Dial the feature number(50).
•You hear a confirmation tone and then a dial tone.
•You may replace the handset.
Retrieving a call on hold
– at the holding extension;
1.Lift the handset.
2.Dial the feature number(50).
Conditions
•To retrieve a call on hold at another...

SLT and ISDN Telephone Features7-23
7.2SLT and ISDN Telephone FeaturesC
Call Hold Retrieve
Allows you to retrieve a call that has been placed on hold by another extension.
Retrieving an outside call on hold
– at another extension;
1.Lift the handset.
2.Dial the feature number(53).
3.Dial the held CO line numberas follows.
- 01 through 08 :if you are connected to the KX-TD816
- 01 through 24 :if you are connected to the KX-TD1232
•You hear a confirmation tone (optional).
Retrieving an intercom call on...