Panasonic Kx-Td816e, Kx-td1232e User Manual

7-74SLT and ISDN Telephone Features
P7.2SLT and ISDN Telephone Features
Dialling
1.Lift the handset.
•Wait for the answer and talk.
Conditions
•This feature does not work if you answer an incoming call or retrieve a call on hold.
•Up to sixteen digits,consisting of “0 through 9”and “
,”can be stored.  “#”cannot
be stored.
•During the waiting time after lifting the handset,you can dial another party,and
override this feature.  You can modify the waiting time between picking up the
handset and connecting...

SLT and ISDN Telephone Features7-75
7.2SLT and ISDN Telephone FeaturesP
Pulse to Tone Conversion 
Allows you to change from Pulse to Tone dialling mode so that you can access services
(such as Voice Mail) that require tone.
1.Dial thephone number (Pulse mode).
2.Dial and #.
3.Dial thephone number (Tone mode).
Conditions
•You cannot change from Tone to Pulse dialling mode.
1
2
3
phone number
phone number 

7-76SLT and ISDN Telephone Features
Q7.2SLT and ISDN Telephone Features
Quick Dialling
Allows you to make a quick dial call by pressing a pre-assigned quick dial number.
Dialling
1.Lift the handset.
2.Dial the quick dial number.
Conditions
•Up to eighty quick dial numbers can be stored by System Programming.
•You must assign a feature number first in program [104] “Quick Dial Assignment,”
and then a quick dial number in program [009] “Quick Dial Number Set”in order for
Quick Dial to be effective.
•For...

SLT and ISDN Telephone Features7-77
7.2SLT and ISDN Telephone FeaturesR
Redial,Last Number
Automatically saves the last outside call number you dialled and allows you to make
the same outgoing call again.
1.Lift the handset.
2.Dial #.
Conditions
•Up to twenty-four digits can be stored and redialled; this does not include the CO line
access code.
•“”and “#”are counted as one digit.
•The memorised telephone number is replaced by a new one if at least one digit to be
sent to a CO line is dialled.  Dialling...

7-78SLT and ISDN Telephone Features
S7.2 SLT and ISDN Telephone Features
Station Feature Clear
Allows you to reset the following station features to the default settings.
a) Absent Message Capability
b) Automatic Callback Busy (Camp-On)
c) Call Forwarding
d) Call Pickup Deny
e) Call Waiting
f) Calling Line Identification Restriction (CLIR)
g) CO Incoming Call Information Log
h) Connected Line Identification Restriction (COIR)
i) Do Not Disturb (DND)
j) Log-In
k) Message Waiting – (All messages will be...

SLT and ISDN Telephone Features7-79
7.2SLT and ISDN Telephone FeaturesS
Station Speed Dialling
Allows you to store up to ten speed dial numbers at your extension.  These numbers are
available to your extension only.
Storing the phone number
1.Lift the handset.
2.Dial the feature number(60).
3.Dial the Station Speed Dial number(0 through 9).
4.Dial the desired numberand #.
•You hear a confirmation tone.
5.Hang up.
Dialling
1.Lift the handset.
2.Dial the feature number(6).
3.Dial the Station Speed Dial...

7-80SLT and ISDN Telephone Features
S7.2SLT and ISDN Telephone Features
Conditions
•You can store an extension number,a telephone number,or a feature number of up to
sixteen digits.
•To store the telephone number of an outside party,the line access code (9 or 81
through 88) must be stored as the leading digit.
•Valid digits are “0 through 9”and “
.”
•“Station Speed Dialling”can be followed by manual dialling to supplement the
dialled digits. 

SLT and ISDN Telephone Features7-81
7.2SLT and ISDN Telephone FeaturesS
System Speed Dialling
Allows you to make a call using speed dial numbers previously programmed.  This
system supports five hundredspeed dial numbers which are available to all extension
users.
1.Lift the handset.
2.Dial .
•You hear no tone.
3.Dial the System Speed Dial number (000 through 499).
Conditions
•System Speed Dial numbers must be stored either through User (Manager) or System
Programming.
•“System Speed Dialling”can be...

7-82SLT and ISDN Telephone Features
T7.2SLT and ISDN Telephone Features
Timed Reminder
Allows you to set your extension to sound an alarm once or everyday at the preset time.
Setting
1.Lift the handset.
2.Dial the feature number(76) and 1.
3.Enter the hour(01 through 12) and the minute(00 through
59).
4.Dial 0to enter AM,or dial 1to enter PM.
5.Dial 0for a one time alarm setting,*
1or dial 1for a daily
alarm setting.*
2
*1You hear an alarm ringing at the preset time and then the setting is cleared.
*2You...

SLT and ISDN Telephone Features7-83
7.2SLT and ISDN Telephone FeaturesT
Stopping the alarm ringing
1.Lift the handset.
Conditions
•The system clock must be set before the alarm is set.
•The alarm ringing continues for thirty seconds.
•If you receive an incoming call during the alarm,ringing starts after the alarm stops.
•If you are having a conversation at the time the alarm is set to sound,the alarm starts
after the conversation.
Programming References
•User Programming (Section 3) / System Programming...