Panasonic Kx-Td816e, Kx-td1232e User Manual

7-84SLT and ISDN Telephone Features
T7.2SLT and ISDN Telephone Features
Toll Restriction Override
There are two types of toll restriction override:
•Toll Restriction Override by Account Code Entry
•Toll Restriction Override for System Speed Dialling
Toll Restriction Override by Account Code Entry
Allows you to temporarily override toll restriction and make a toll call from a toll-
restricted telephone.  You can carry out this feature by entering an appropriate account
code before dialling a telephone...

SLT and ISDN Telephone Features7-85
7.2SLT and ISDN Telephone FeaturesT
Toll Restriction Override for System Speed Dialling
Calls originated by “System Speed Dialling”are restricted depending on the extension’s
toll restriction level.
Programming References 
•System Programming — Installation Manual
[509]–[510]Toll Restriction Level for System Speed Dialling — Day/Night
Feature References
System Speed Dialling
Toll Restriction (®see Installation Manual) 

7-86SLT and ISDN Telephone Features
T7.2SLT and ISDN Telephone Features
Trunk (CO Line) Answer From Any Station (TAFAS)
Allows you to answer an incoming outside call,paged through an external pager,from
any extension.
While hearing a tone from the external pager;
1.Lift the handset.
2.Dial the feature number(42).
3.Dial the external pager number as follows.
-1 or 2:if you are connected to the KX-TD816
-1 through 4:if you are connected to the KX-TD1232
•You hear a confirmation tone (optional).
•The line...

SLT and ISDN Telephone Features7-87
7.2SLT and ISDN Telephone FeaturesU
Uniform Call Distribution (UCD)
Allows incoming calls (CO line,extension) to be distributed uniformly to a specific
group of extensions called an UCD group.  Calls to an UCD group queue up,and the
head of the queue searches for an idle extension.
Conditions
•UCD can be used in the following cases:
a)The floating number* of UCD is assigned as the DIL 1:1 destination.
b)The floating number* of UCD is assigned as the Intercept Routing...

7-88SLT and ISDN Telephone Features
V7.2SLT and ISDN Telephone Features
1
2
3
4
VM extension number
(X:2 through 5)
1
2
VM extension number
Voice Mail Integration
Allows you to have your calls forwarded to your Voice Processing System mailbox.
Setting Call Forwarding destination to Voice Mail
1.Lift the handset.
2.Dial the feature number(710) and the Call Forwarding
number(2 through 5).
•Each Call Forwarding number corresponds to the following
services:
- 2 :Call Forwarding — All Calls
- 3 :Call...

SLT and ISDN Telephone Features7-89
7.2SLT and ISDN Telephone FeaturesV
Conditions
•Outside callers can leave their messages in your mailbox.  When an incoming outside
call arrives,the operator answers the call and forwards it to your extension.  And...
—If you set a “Call Forwarding”function whose destination is the Voice Mail;
The call will be forwarded to the Voice Mail automatically.
—If you do not set a “Call Forwarding”function;
The call will return to the operator.  Then the operator transfers the...

7-90SLT and ISDN Telephone Features
7.3ISDN Telephone Features
The system supports ISDN telephones in addition to proprietary telephones and single
line telephones.  The features are almost the same as ones of the single line telephone.
There are,however,some features that are unavailable for ISDN telephones as shown
below.  As for available features,see Section 7.2,“SLT and ISDN telephone Features.”
Features unavailable for ISDN telephones
•Account Code Entry
Dialling “99”instead of “#”as the delimiter...

Contents
Basic Operations ............................................................................8-2
Station Programming .....................................................................8-2
User Programming (Manager Programming) ...............................8-9
DPT Features ...............................................................................8-10
Operator Service Features ...........................................................8-22
Special Display...

8-2Quick Reference
8Quick Reference
pMaking Calls
—Intercom Calling
•Off-hook.
•Dial the extension number,or press a DSS
button.
—Outward Dialling
•Off-hook.
•Dial 9 or 81 through 88,or press a CO
button.
-9:Line Access,Automatic
-81 – 88:Line Access,CO Line Group
-CO:Line Access,Individual
•Dial the phone number.
pReceiving Calls
•Off-hook.
OR
•Press a flashing CO button directly
(Answering,Direct CO Line),or a flashing
INTERCOM button directly.
lTo enter programming mode
(Be sure the telephone is idle...

Quick Reference8-3
8Quick Reference
pCharge Fee Reference
—Extension Charge Fee Reference
•Enter the programming mode.
•Dial 8.
•Enter ID Code.
•Dial 1 + extension number.
•Press SEL (S1) button.
•Press the desired button (CLR,STORE,
NEXT,or PREV),if required.
•Press HOLD (END) button three times.
•Exit the programming mode.
—CO Line Charge Fee Reference
•Enter the programming mode.
•Dial 8.
•Enter ID code.
•Dial 2.
•Dial CO line number as follows.
- 01 - 08 :if connected to the KX-TD816
- 01 -
24 :if...