Panasonic Kx Taw848 Programing Manual
Here you can view all the pages of manual Panasonic Kx Taw848 Programing Manual. The Panasonic manuals for Wireless PBX are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
2.7 [1] Configuration
PC Programming Manual 81
Feature Manual References
1.3.1 Caller ID
Caller ID—Caller ID Signalling
Selects the type of Caller ID signalling provided by the telephone company.
Default
FSK
Value Range
FSK (Frequency Shift Keying), FSK (with Visual Caller ID), DTMF
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Manual References
1.3.1 Caller ID
Caller ID—Max Receive Time
Specifies the maximum number of Caller ID series that are...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-80.png "Page 81
2.7 [1] Configuration
PC Programming Manual 81
Feature Manual References
1.3.1 Caller ID
Caller ID—Caller ID Signalling
Selects the type of Caller ID signalling provided by the telephone company.
Default
FSK
Value Range
FSK (Frequency Shift Keying), FSK (with Visual Caller ID), DTMF
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Manual References
1.3.1 Caller ID
Caller ID—Max Receive Time
Specifies the maximum number of Caller ID series that are...")
2.7 [1] Configuration PC Programming Manual 81 Feature Manual References 1.3.1 Caller ID Caller ID—Caller ID Signalling Selects the type of Caller ID signalling provided by the telephone company. Default FSK Value Range FSK (Frequency Shift Keying), FSK (with Visual Caller ID), DTMF Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property Programming Manual References None Feature Manual References 1.3.1 Caller ID Caller ID—Max Receive Time Specifies the maximum number of Caller ID series that are...
Page 82
![Page 82
2.7 [1] Configuration
82 PC Programming Manual
Value Range
Disable, Enable
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Manual References
1.3.1 Caller ID
Caller ID—Caller ID (FSK) END Detection
Selects the method used to detect the end of Caller ID information.
Default
Length + Timer
Value Range
Length + Timer, Timer
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Manual References...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-81.png "Page 82
2.7 [1] Configuration
82 PC Programming Manual
Value Range
Disable, Enable
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Manual References
1.3.1 Caller ID
Caller ID—Caller ID (FSK) END Detection
Selects the method used to detect the end of Caller ID information.
Default
Length + Timer
Value Range
Length + Timer, Timer
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Manual References...")
2.7 [1] Configuration 82 PC Programming Manual Value Range Disable, Enable Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property Programming Manual References None Feature Manual References 1.3.1 Caller ID Caller ID—Caller ID (FSK) END Detection Selects the method used to detect the end of Caller ID information. Default Length + Timer Value Range Length + Timer, Timer Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property Programming Manual References None Feature Manual References...
Page 83
![Page 83
2.7 [1] Configuration
PC Programming Manual 83
Feature Manual References
1.3.1 Caller ID
Caller ID—Caller ID (FSK) Detection Start Timer
Specifies the length of time that the PBX waits before attempting to detect Caller ID information, after
receiving a call. To enable this setting, Caller ID—Caller ID Signalling on this screen should be set
to FSK.
Default
80 ms
Value Range
None, 80 × n (n=1–15) ms
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
None...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-82.png "Page 83
2.7 [1] Configuration
PC Programming Manual 83
Feature Manual References
1.3.1 Caller ID
Caller ID—Caller ID (FSK) Detection Start Timer
Specifies the length of time that the PBX waits before attempting to detect Caller ID information, after
receiving a call. To enable this setting, Caller ID—Caller ID Signalling on this screen should be set
to FSK.
Default
80 ms
Value Range
None, 80 × n (n=1–15) ms
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
None...")
2.7 [1] Configuration PC Programming Manual 83 Feature Manual References 1.3.1 Caller ID Caller ID—Caller ID (FSK) Detection Start Timer Specifies the length of time that the PBX waits before attempting to detect Caller ID information, after receiving a call. To enable this setting, Caller ID—Caller ID Signalling on this screen should be set to FSK. Default 80 ms Value Range None, 80 × n (n=1–15) ms Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property Programming Manual References None...
Page 84
![Page 84
2.7 [1] Configuration
84 PC Programming Manual
2.7.8 [1-1] Slot—LCO Port
Various settings can be programmed for each analog CO line port.
To change the status of ports, click Command.
Slot
Indicates the slot position (reference only).
Default
Current slot number
Value Range
Slot number
Maintenance Console Location
2.7.8 [1-1] Slot—LCO Port
Programming Manual References
None
Feature Manual References
None
Por t
Indicates the port number (reference only).
Default
Current port number
Value Range
Port...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-83.png "Page 84
2.7 [1] Configuration
84 PC Programming Manual
2.7.8 [1-1] Slot—LCO Port
Various settings can be programmed for each analog CO line port.
To change the status of ports, click Command.
Slot
Indicates the slot position (reference only).
Default
Current slot number
Value Range
Slot number
Maintenance Console Location
2.7.8 [1-1] Slot—LCO Port
Programming Manual References
None
Feature Manual References
None
Por t
Indicates the port number (reference only).
Default
Current port number
Value Range
Port...")
2.7 [1] Configuration 84 PC Programming Manual 2.7.8 [1-1] Slot—LCO Port Various settings can be programmed for each analog CO line port. To change the status of ports, click Command. Slot Indicates the slot position (reference only). Default Current slot number Value Range Slot number Maintenance Console Location 2.7.8 [1-1] Slot—LCO Port Programming Manual References None Feature Manual References None Por t Indicates the port number (reference only). Default Current port number Value Range Port...
Page 85
![Page 85
2.7 [1] Configuration
PC Programming Manual 85
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The por t is out of service.
Maintenance Console Location
2.7.8 [1-1] Slot—LCO Port
Programming Manual References
2.7.9 [1-1] Slot—LCO Port—Port Command
Feature Manual References
None
Dialing Mode
Selects the type of signal used to dial out to the analog CO line.
Default
DTMF
Value Range
DTMF, Pulse
Maintenance Console...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-84.png "Page 85
2.7 [1] Configuration
PC Programming Manual 85
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The por t is out of service.
Maintenance Console Location
2.7.8 [1-1] Slot—LCO Port
Programming Manual References
2.7.9 [1-1] Slot—LCO Port—Port Command
Feature Manual References
None
Dialing Mode
Selects the type of signal used to dial out to the analog CO line.
Default
DTMF
Value Range
DTMF, Pulse
Maintenance Console...")
2.7 [1] Configuration PC Programming Manual 85 Select the desired cell in the column, and then click Command. Default Current status Value Range INS: The port is in service. OUS: The por t is out of service. Maintenance Console Location 2.7.8 [1-1] Slot—LCO Port Programming Manual References 2.7.9 [1-1] Slot—LCO Port—Port Command Feature Manual References None Dialing Mode Selects the type of signal used to dial out to the analog CO line. Default DTMF Value Range DTMF, Pulse Maintenance Console...
Page 86
![Page 86
2.7 [1] Configuration
86 PC Programming Manual
Maintenance Console Location
2.7.8 [1-1] Slot—LCO Port
Programming Manual References
None
Feature Manual References
1.3.17 CPC (Calling Party Control) Signal Detection
DTMF Width
Selects the length of the DTMF tone sent to the analog CO line.
Default
80 ms
Value Range
80 ms, 160 ms
Maintenance Console Location
2.7.8 [1-1] Slot—LCO Port
Programming Manual References
None
Feature Manual References
None
Pulse Speed
Selects the speed at which pulse dials are...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-85.png "Page 86
2.7 [1] Configuration
86 PC Programming Manual
Maintenance Console Location
2.7.8 [1-1] Slot—LCO Port
Programming Manual References
None
Feature Manual References
1.3.17 CPC (Calling Party Control) Signal Detection
DTMF Width
Selects the length of the DTMF tone sent to the analog CO line.
Default
80 ms
Value Range
80 ms, 160 ms
Maintenance Console Location
2.7.8 [1-1] Slot—LCO Port
Programming Manual References
None
Feature Manual References
None
Pulse Speed
Selects the speed at which pulse dials are...")
2.7 [1] Configuration 86 PC Programming Manual Maintenance Console Location 2.7.8 [1-1] Slot—LCO Port Programming Manual References None Feature Manual References 1.3.17 CPC (Calling Party Control) Signal Detection DTMF Width Selects the length of the DTMF tone sent to the analog CO line. Default 80 ms Value Range 80 ms, 160 ms Maintenance Console Location 2.7.8 [1-1] Slot—LCO Port Programming Manual References None Feature Manual References None Pulse Speed Selects the speed at which pulse dials are...
Page 87
![Page 87
2.7 [1] Configuration
PC Programming Manual 87
Caller ID Detection
Enables the PBX to detect a Caller ID signal from the analog CO line.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.7.8 [1-1] Slot—LCO Port
Programming Manual References
2.7.7 [1-1] Slot—LCO Card Property
Feature Manual References
1.3.1 Caller ID
Pause Time
Specifies the length of a pause.
Default
1.5 s
Value Range
1.5 s, 2.5 s, 3.5 s, 4.5 s
Maintenance Console Location
2.7.8 [1-1] Slot—LCO Port
Programming...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-86.png "Page 87
2.7 [1] Configuration
PC Programming Manual 87
Caller ID Detection
Enables the PBX to detect a Caller ID signal from the analog CO line.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.7.8 [1-1] Slot—LCO Port
Programming Manual References
2.7.7 [1-1] Slot—LCO Card Property
Feature Manual References
1.3.1 Caller ID
Pause Time
Specifies the length of a pause.
Default
1.5 s
Value Range
1.5 s, 2.5 s, 3.5 s, 4.5 s
Maintenance Console Location
2.7.8 [1-1] Slot—LCO Port
Programming...")
2.7 [1] Configuration PC Programming Manual 87 Caller ID Detection Enables the PBX to detect a Caller ID signal from the analog CO line. Default Enable Value Range Disable, Enable Maintenance Console Location 2.7.8 [1-1] Slot—LCO Port Programming Manual References 2.7.7 [1-1] Slot—LCO Card Property Feature Manual References 1.3.1 Caller ID Pause Time Specifies the length of a pause. Default 1.5 s Value Range 1.5 s, 2.5 s, 3.5 s, 4.5 s Maintenance Console Location 2.7.8 [1-1] Slot—LCO Port Programming...
Page 88
![Page 88
2.7 [1] Configuration
88 PC Programming Manual
Value Range
None, 16 × n (n=1–255) ms
Maintenance Console Location
2.7.8 [1-1] Slot—LCO Port
Programming Manual References
None
Feature Manual References
1.5.1 EFA (External Feature Access)
Disconnect Time
Specifies the length of time after a CO line is disconnected, during which the PBX cannot seize the
line.
Default
1.5 s
Value Range
0.5 s, 1.5 s, 2.0 s, 4.0 s, 12.0 s
Maintenance Console Location
2.7.8 [1-1] Slot—LCO Port
Programming Manual References...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-87.png "Page 88
2.7 [1] Configuration
88 PC Programming Manual
Value Range
None, 16 × n (n=1–255) ms
Maintenance Console Location
2.7.8 [1-1] Slot—LCO Port
Programming Manual References
None
Feature Manual References
1.5.1 EFA (External Feature Access)
Disconnect Time
Specifies the length of time after a CO line is disconnected, during which the PBX cannot seize the
line.
Default
1.5 s
Value Range
0.5 s, 1.5 s, 2.0 s, 4.0 s, 12.0 s
Maintenance Console Location
2.7.8 [1-1] Slot—LCO Port
Programming Manual References...")
2.7 [1] Configuration 88 PC Programming Manual Value Range None, 16 × n (n=1–255) ms Maintenance Console Location 2.7.8 [1-1] Slot—LCO Port Programming Manual References None Feature Manual References 1.5.1 EFA (External Feature Access) Disconnect Time Specifies the length of time after a CO line is disconnected, during which the PBX cannot seize the line. Default 1.5 s Value Range 0.5 s, 1.5 s, 2.0 s, 4.0 s, 12.0 s Maintenance Console Location 2.7.8 [1-1] Slot—LCO Port Programming Manual References...
Page 89
![Page 89
2.7 [1] Configuration
PC Programming Manual 89
Maintenance Console Location
2.7.9 [1-1] Slot—LCO Port—Port Command
Programming Manual References
2.7.8 [1-1] Slot—LCO Port
Feature Manual References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the
purpose of repair.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
2.7.9 [1-1] Slot—LCO Port—Port Command
Programming Manual References
2.7.8 [1-1] Slot—LCO Port
Feature...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-88.png "Page 89
2.7 [1] Configuration
PC Programming Manual 89
Maintenance Console Location
2.7.9 [1-1] Slot—LCO Port—Port Command
Programming Manual References
2.7.8 [1-1] Slot—LCO Port
Feature Manual References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the
purpose of repair.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
2.7.9 [1-1] Slot—LCO Port—Port Command
Programming Manual References
2.7.8 [1-1] Slot—LCO Port
Feature...")
2.7 [1] Configuration PC Programming Manual 89 Maintenance Console Location 2.7.9 [1-1] Slot—LCO Port—Port Command Programming Manual References 2.7.8 [1-1] Slot—LCO Port Feature Manual References None OUS Takes the port out of service. This enables a temporary non-use of the port, for example, for the purpose of repair. Default Not applicable. Value Range Not applicable. Maintenance Console Location 2.7.9 [1-1] Slot—LCO Port—Port Command Programming Manual References 2.7.8 [1-1] Slot—LCO Port Feature...
Page 90
![Page 90
2.7 [1] Configuration
90 PC Programming Manual
Programming Manual References
None
Feature Manual References
None
Por t Number
Indicates the port number (reference only).
Default
Current port number
Value Range
Port number
Maintenance Console Location
2.7.10 [1-1] Slot—DPH Card Property
Programming Manual References
None
Feature Manual References
None
Por t Status
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
Click the desired cell...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-89.png "Page 90
2.7 [1] Configuration
90 PC Programming Manual
Programming Manual References
None
Feature Manual References
None
Por t Number
Indicates the port number (reference only).
Default
Current port number
Value Range
Port number
Maintenance Console Location
2.7.10 [1-1] Slot—DPH Card Property
Programming Manual References
None
Feature Manual References
None
Por t Status
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
Click the desired cell...")
2.7 [1] Configuration 90 PC Programming Manual Programming Manual References None Feature Manual References None Por t Number Indicates the port number (reference only). Default Current port number Value Range Port number Maintenance Console Location 2.7.10 [1-1] Slot—DPH Card Property Programming Manual References None Feature Manual References None Por t Status Indicates the port status (reference only). This column offers two ways to open the screen to select the port command: Click the desired cell...