Panasonic Kx Taw848 Programing Manual

2.6 Help
PC Programming Manual 51
2.6 Help
2.6.1 Frequently Asked Questions (FAQ)
This section provides answers to some common questions about using the Maintenance Console 
software to program the PBX. The information is divided into the following topics:
Connection
Title Description
Connection Connecting to the PBX using Maintenance Console.
Maintenance Console Software Using the Maintenance Console software.
Card Status Changing the status (INS/OUS) of cards.
Portable Stations Setting up portable...

2.6 Help
52 PC Programming Manual
Maintenance Console Software
Card Status
Portable Stations
QCan I perform initial setup of the PBX without being connected to the PBX?
A Yes. This is possible in Batch mode.
Create a new system data file using 2.2.1 File—New, edit settings as required, and then 
upload this file to the PBX later (see 2.5.2 Utility—File Transfer PC to PBX (SD Card)).
Q
How do I confirm the software version of the PBX or installed cards?
AFrom 2.7.1 [1-1] Slot, click Summary. Summary...

2.6 Help
PC Programming Manual 53
Numbering
A Is the status of the HLC card or preinstalled Hybrid ports set to INS?
 Is a CS connected to the HLC card or preinstalled Hybrid ports? If not, connect one.
 Do the PINs (Personal Identification Numbers) of the PBX and the Portable Station 
match? Confirm that they are the same.
 Is the Portable Station within transmission range of the CS?
 Has the Portable Station previously been registered at another location?
It is not possible to register a Portable...

2.6 Help
54 PC Programming Manual
QHow do I change the extension numbering plan from 3-digit numbers to 4-digit 
numbers?
A Perform the following steps:
1.Open the 2.8.8 [2-6-1] Numbering Plan—Main screen.
2.Enter a 2-digit number in Leading Number, or change No. of Additional Digits 
from x to xx.
For more details, see What is the procedure to modify the Numbering Plan?.
Q
How do I set a 3-digit numbering plan?
A There are 2 methods of creating a 3-digit numbering plan, using 2.8.8 [2-6-1] 
Numbering...

2.6 Help
PC Programming Manual 55
A It is not possible to use the same Leading Number for 2 extension blocks, or to use a 
number that could possibly overlap with another Leading Number.
So, for example, if 2 is already set as a Leading Number it is not possible to set 21 as 
another Leading Number because of the possible overlap of extension numbers.
The number you are trying to store cannot be used if it is already being used by:
 A feature number
 Another extension block
 Quick Dialing (see 2.8.9...

2.6 Help
56 PC Programming Manual
Saving Modified Data
QModified settings have not been updated in the PBX.
AClick Apply or OK in the sub-menu screen.
Q
Modified settings are not saved even when I press the Apply button.
A To save the system data files, choose Save from the File menu.
Q
If I reset the PBX directly after modifying settings, the modified settings are not 
updated in the PBX.
A When you click Apply, the settings are updated in the PBX, but are not yet saved to the 
SD memory card. If...

2.6 Help
PC Programming Manual 57
Setting Features
A The following setting data is not saved to the SD memory card, so will be deleted when 
the PBX is initialized. This data is stored in the PBXs battery backup memory.
 Incoming Call Log
 Outgoing Call Log (including Last Number Redial)
 Message Waiting
SMDR
 PBX date and time
 Timed Reminder
 Daily test start time
 PT handset/headset volume
 PT SP-PHONE volume
PT ring volume
 PT display contrast
 ICD Group login status
(All extensions are...

2.6 Help
58 PC Programming Manual
QI have set the type of an extension port to DSS Console, but I cannot apply 
this setting. (Error E000402)
A The number entered in DPT Type—Location No. (for Hybrid port) on the 2.7.4 [1-1] 
Slot—Extension Port screen is the same as that entered for another DSS Console. 
Change this so that the numbers do not overlap.
Q
I have set the type of an extension port to VM (DPT), but I cannot apply this 
setting. (Error E000403)
AThe DPT Type—VM Unit No. (for Hybrid port)...

2.6 Help
PC Programming Manual 59
A Perform the following steps:
1.On the 2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings screen, 
enter the floating extension number you chose for the ICD group in the Floating 
Extension Number cell.
2.Click Apply.
3.On the 2.9.12 [3-5-4] Incoming Call Distribution Group—Member screen, select 
the ICD group you created from the Incoming Call Distribution drop-down list.
4.Enter the extension numbers of member extensions in the Extension Number 
column....

2.7 [1] Configuration
60 PC Programming Manual
2.7 [1] Configuration
2.7.1 [1-1] Slot
The operating characteristics associated with each service card can be programmed.
Move the mouse pointer over an installed card to display the menu of options for that card. To view a 
summary of status and MPR versions for all cards installed in the PBX, click the Summary button 
(see 2.7.2 [1-1] Slot—Summary).
To install a new card to the PBX
1.Click on the name of the card to install in the list on the right.
An...