Panasonic Kx Taw848 Programing Manual

2.1 Introduction
PC Programming Manual 21
Connect
Menu Option Initial Batch Interactive
UA I UA I UA I
RS-232C
USB
Modem
Profile Setup
Disconnect
Tool
Menu Option Initial Batch Interactive
UA I UA I UA I
SD memory backup
Simplified Voice Message→Delete All 
Recordings
Simplified Voice Message→Check Current 
Usage
Extension List View
Import→Feature - Speed Dial and Caller ID
Import→ARS - Leading Digit
Import→ARS - Except Code
Import→ARS - Routing Plan
Import→Wired Extension
Import→PS Extension...

2.1 Introduction
22 PC Programming Manual
Export→Quick Dial (Basic)
System Data Convert
Utility
Menu Option Initial Batch Interactive
UA I UA I UA I
Diagnosis
File Transfer PC to PBX (SD Card)
File Transfer PBX (SD Card) to PC
SD Card File View and Load
SD Card File Delete
Message File Transfer PC to PBX
Message File Transfer PBX to PC
Error Log
CS Information
PS Information
System Reset→Reset by the Command
View
Menu Option Initial Batch Interactive
UA I UA I UA I
To o l b a r
Status Bar
System Menu...

2.1 Introduction
PC Programming Manual 23
2.1.3 Software Interface
This section explains the functions of the various elements of the software interface.
Main Window
The window of the Maintenance Console software is divided into several areas, as shown below:Tile(Horz)
Tile(Vert)
Help
Menu Option Initial Batch Interactive
UA I UA I UA I
Help
Additional Information
About Window
Menu Option Initial Batch Interactive
UA I UA I UA I 

2.1 Introduction
24 PC Programming Manual
1. Menu Bar
Provides access to file management and connection options, as well as tools and utilities used in 
programming the PBX.
For details, see Sections 2.2 File to 2.6 Help.
2. Tool Bar
Provides easy access to commonly used software functions.
Two tool bars are provided, as follows:
File
Contains icons for creating, opening, and saving files. For details, see Sections 2.2.1 File—
New, 2.2.2 File—Open, and 2.2.4 File—Save.
123
45 6 

2.1 Introduction
PC Programming Manual 25
Tools
Contains icons for backing up PBX data to the SD Memory Card, viewing extension 
information, and accessing Online Help. For details, see Sections 2.4.1 Tool—SD memory 
backup and 2.4.4 Tool—Extension List View.
These menus can be positioned freely. Click and drag the title bar of a menu to move it to another 
position. It will automatically snap in to position above, below, to the left, or to the right of the main 
window if released there. Otherwise, it...

2.1 Introduction
26 PC Programming Manual
6. Main Screen
Displays the screens selected from 4. System Menu above.
For details, see Sections 2.7 [1] Configuration to 2.16 [10] Maintenance.
Standard Buttons and Elements
There are several standard buttons that are displayed on many screens within the Maintenance 
Console.
The standard buttons are as follows:
In addition, many screens within the software display a small open folder icon ( ) beside lists of 
setting items. Clicking this icon will collapse...

2.1 Introduction
PC Programming Manual 27
 Out of service means that the card is installed correctly in the PBX, but has been 
temporarily removed from use. This allows settings to be modified or software to be 
upgraded.
 Fault means that the card is not installed in the PBX correctly, or is not functioning correctly. 
For more information, see the Installation Manual.
For details about how to change the status of a card, see To change the status (INS/OUS) of a card 
(Interactive mode only) on screen...

2.1 Introduction
28 PC Programming Manual
Extension Numbers & Names List
Displays all available extensions of the types selected in Extension Type, and names. Click entries 
to select them, and click the Add button when finished, to add the selected extensions. To deselect 
an entry, click it again.
Default
Available extensions.
Value Range
Matching extensions
Available Column
Specifies which fields in the original form to add extension data to. For example, if both extension 
numbers and names can be...

2.2 File
PC Programming Manual 29
2.2 File
2.2.1 File—New
Creates a new system data file, used to program the PBX in Batch mode. All settings are in their initial 
or default state.
This option is only available at Installer level.
To upload the file created here to the SD memory card installed in the PBX, see 2.5.2 Utility—File 
Transfer PC to PBX (SD Card).
Note
Since selecting this option creates a blank system data file, uploading this file to the PBX will 
overwrite all previous settings. Use only...

2.2 File
30 PC Programming Manual
2.2.3 File—Close
Closes the system data file that is currently being modified, and returns to Initial mode.
To close a system data file
 From the File menu, select Close.
If the system data file has not been saved, a warning message will be displayed, giving you the 
option to save the file.
Click Ye s to save the file.
Click No to abandon the changes.
2.2.4 File—Save
Overwrites the previously saved system data file with the system data currently being modified in...