Panasonic Kx Taw848 Programing Manual
Here you can view all the pages of manual Panasonic Kx Taw848 Programing Manual. The Panasonic manuals for Wireless PBX are available online for free. You can easily download all the documents as PDF.
Page 111
![Page 111
2.8 [2] System
PC Programming Manual 111
DISA—Intercept Timer—Day, Lunch, Break, Night
Specifies the length of time until an unanswered DISA call is intercepted and redirected to the
intercept routing destination after the original destination receives the call in each time mode.
Default
40 s
Value Range
0–60 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Intercept Destination—Intercept Destination—
When called...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-110.png "Page 111
2.8 [2] System
PC Programming Manual 111
DISA—Intercept Timer—Day, Lunch, Break, Night
Specifies the length of time until an unanswered DISA call is intercepted and redirected to the
intercept routing destination after the original destination receives the call in each time mode.
Default
40 s
Value Range
0–60 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Intercept Destination—Intercept Destination—
When called...")
2.8 [2] System PC Programming Manual 111 DISA—Intercept Timer—Day, Lunch, Break, Night Specifies the length of time until an unanswered DISA call is intercepted and redirected to the intercept routing destination after the original destination receives the call in each time mode. Default 40 s Value Range 0–60 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References 2.10.1 [4-1-1] Wired Extension—Extension Settings—Intercept Destination—Intercept Destination— When called...
Page 112
![Page 112
2.8 [2] System
112 PC Programming Manual
Default
10
Value Range
0–15
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.11.4 [5-3-2] Voice Message—DISA Message
Feature Manual References
1.4.6 DISA (Direct Inward System Access)
DISA—CO-to-CO Call Prolong Time
Specifies the length of time that a CO-to-CO line call on a DISA line is prolonged each time that the
caller prolongs the call. (Selecting 0 prevents the caller from prolonging the CO-to-CO line call.)...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-111.png "Page 112
2.8 [2] System
112 PC Programming Manual
Default
10
Value Range
0–15
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.11.4 [5-3-2] Voice Message—DISA Message
Feature Manual References
1.4.6 DISA (Direct Inward System Access)
DISA—CO-to-CO Call Prolong Time
Specifies the length of time that a CO-to-CO line call on a DISA line is prolonged each time that the
caller prolongs the call. (Selecting 0 prevents the caller from prolonging the CO-to-CO line call.)...")
2.8 [2] System 112 PC Programming Manual Default 10 Value Range 0–15 Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References 2.11.4 [5-3-2] Voice Message—DISA Message Feature Manual References 1.4.6 DISA (Direct Inward System Access) DISA—CO-to-CO Call Prolong Time Specifies the length of time that a CO-to-CO line call on a DISA line is prolonged each time that the caller prolongs the call. (Selecting 0 prevents the caller from prolonging the CO-to-CO line call.)...
Page 113
![Page 113
2.8 [2] System
PC Programming Manual 113
Programming Manual References
2.11.4 [5-3-2] Voice Message—DISA Message
Feature Manual References
1.12.1 OGM (Outgoing Message)
DISA—Reorder Tone Duration
Specifies the length of time that a reorder tone is sent to the caller before the call is disconnected.
Default
10 s
Value Range
1–15 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.11.4 [5-3-2] Voice Message—DISA Message
Feature Manual References
1.4.6 DISA (Direct...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-112.png "Page 113
2.8 [2] System
PC Programming Manual 113
Programming Manual References
2.11.4 [5-3-2] Voice Message—DISA Message
Feature Manual References
1.12.1 OGM (Outgoing Message)
DISA—Reorder Tone Duration
Specifies the length of time that a reorder tone is sent to the caller before the call is disconnected.
Default
10 s
Value Range
1–15 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.11.4 [5-3-2] Voice Message—DISA Message
Feature Manual References
1.4.6 DISA (Direct...")
2.8 [2] System PC Programming Manual 113 Programming Manual References 2.11.4 [5-3-2] Voice Message—DISA Message Feature Manual References 1.12.1 OGM (Outgoing Message) DISA—Reorder Tone Duration Specifies the length of time that a reorder tone is sent to the caller before the call is disconnected. Default 10 s Value Range 1–15 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References 2.11.4 [5-3-2] Voice Message—DISA Message Feature Manual References 1.4.6 DISA (Direct...
Page 114
![Page 114
2.8 [2] System
114 PC Programming Manual
Default
60 s
Value Range
10 × n (n=0–30) s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.11.1 [5-1] Doorphone
Feature Manual References
1.4.10 Doorphone Call
Doorphone—Open Duration
Specifies the length of time that a door stays unlocked after being opened from an extension.
Default
5 s
Value Range
2–7 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.11.1 [5-1] Doorphone...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-113.png "Page 114
2.8 [2] System
114 PC Programming Manual
Default
60 s
Value Range
10 × n (n=0–30) s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.11.1 [5-1] Doorphone
Feature Manual References
1.4.10 Doorphone Call
Doorphone—Open Duration
Specifies the length of time that a door stays unlocked after being opened from an extension.
Default
5 s
Value Range
2–7 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.11.1 [5-1] Doorphone...")
2.8 [2] System 114 PC Programming Manual Default 60 s Value Range 10 × n (n=0–30) s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References 2.11.1 [5-1] Doorphone Feature Manual References 1.4.10 Doorphone Call Doorphone—Open Duration Specifies the length of time that a door stays unlocked after being opened from an extension. Default 5 s Value Range 2–7 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References 2.11.1 [5-1] Doorphone...
Page 115
![Page 115
2.8 [2] System
PC Programming Manual 115
Programming Manual References
None
Feature Manual References
1.17.3 Timed Reminder
Timed Reminder—Interval Time
Specifies the length of time between the repeated alarms.
Default
30 s
Value Range
10 × n (n=1–120) s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
1.17.3 Timed Reminder
Timed Reminder—Alarm Ringing Duration
Specifies the length of time that an alarm rings.
Default
30 s
Value...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-114.png "Page 115
2.8 [2] System
PC Programming Manual 115
Programming Manual References
None
Feature Manual References
1.17.3 Timed Reminder
Timed Reminder—Interval Time
Specifies the length of time between the repeated alarms.
Default
30 s
Value Range
10 × n (n=1–120) s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
1.17.3 Timed Reminder
Timed Reminder—Alarm Ringing Duration
Specifies the length of time that an alarm rings.
Default
30 s
Value...")
2.8 [2] System PC Programming Manual 115 Programming Manual References None Feature Manual References 1.17.3 Timed Reminder Timed Reminder—Interval Time Specifies the length of time between the repeated alarms. Default 30 s Value Range 10 × n (n=1–120) s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature Manual References 1.17.3 Timed Reminder Timed Reminder—Alarm Ringing Duration Specifies the length of time that an alarm rings. Default 30 s Value...
Page 116
![Page 116
2.8 [2] System
116 PC Programming Manual
Default
10 min
Value Range
0–60 min
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
1.3.13 Conference
Unattended Conference—Warning Tone Start Timer
Specifies the length of time until the parties involved in an Unattended Conference receive a warning
tone after the conference originator receives the Unattended Conference Recall tone but does not
return to the conference.
Default
30 s
Value...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-115.png "Page 116
2.8 [2] System
116 PC Programming Manual
Default
10 min
Value Range
0–60 min
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
1.3.13 Conference
Unattended Conference—Warning Tone Start Timer
Specifies the length of time until the parties involved in an Unattended Conference receive a warning
tone after the conference originator receives the Unattended Conference Recall tone but does not
return to the conference.
Default
30 s
Value...")
2.8 [2] System 116 PC Programming Manual Default 10 min Value Range 0–60 min Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature Manual References 1.3.13 Conference Unattended Conference—Warning Tone Start Timer Specifies the length of time until the parties involved in an Unattended Conference receive a warning tone after the conference originator receives the Unattended Conference Recall tone but does not return to the conference. Default 30 s Value...
Page 117
![Page 117
2.8 [2] System
PC Programming Manual 117
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
1.3.13 Conference
Miscellaneous
Caller ID—Waiting to receive
Specifies the length of time that the PBX waits to receive Caller ID from an analog CO line. If the
Caller ID is received through an analog CO line card on which no Caller ID card is mounted or through
a por t to which Caller ID Detection is disabled, this timer is not applicable....](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-116.png "Page 117
2.8 [2] System
PC Programming Manual 117
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
1.3.13 Conference
Miscellaneous
Caller ID—Waiting to receive
Specifies the length of time that the PBX waits to receive Caller ID from an analog CO line. If the
Caller ID is received through an analog CO line card on which no Caller ID card is mounted or through
a por t to which Caller ID Detection is disabled, this timer is not applicable....")
2.8 [2] System PC Programming Manual 117 Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature Manual References 1.3.13 Conference Miscellaneous Caller ID—Waiting to receive Specifies the length of time that the PBX waits to receive Caller ID from an analog CO line. If the Caller ID is received through an analog CO line card on which no Caller ID card is mounted or through a por t to which Caller ID Detection is disabled, this timer is not applicable....
Page 118
![Page 118
2.8 [2] System
118 PC Programming Manual
Programming Manual References
None
Feature Manual References
1.3.1 Caller ID
1.3.9 Call Waiting Tone
Extension PIN—Lock Counter
Specifies the number of successive incorrect PIN entries allowed before the extension PIN is locked.
A locked extension PIN can not be used until reset from the extension assigned as manager.
(Specifying None disables this counter.)
Default
None
Value Range
None, 1–15
Maintenance Console Location
2.8.4 [2-3] Timers & Counters...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-117.png "Page 118
2.8 [2] System
118 PC Programming Manual
Programming Manual References
None
Feature Manual References
1.3.1 Caller ID
1.3.9 Call Waiting Tone
Extension PIN—Lock Counter
Specifies the number of successive incorrect PIN entries allowed before the extension PIN is locked.
A locked extension PIN can not be used until reset from the extension assigned as manager.
(Specifying None disables this counter.)
Default
None
Value Range
None, 1–15
Maintenance Console Location
2.8.4 [2-3] Timers & Counters...")
2.8 [2] System 118 PC Programming Manual Programming Manual References None Feature Manual References 1.3.1 Caller ID 1.3.9 Call Waiting Tone Extension PIN—Lock Counter Specifies the number of successive incorrect PIN entries allowed before the extension PIN is locked. A locked extension PIN can not be used until reset from the extension assigned as manager. (Specifying None disables this counter.) Default None Value Range None, 1–15 Maintenance Console Location 2.8.4 [2-3] Timers & Counters...
Page 119
![Page 119
2.8 [2] System
PC Programming Manual 119
Feature Manual References
1.5.9 External Sensor
PT Display—PT Last Display Duration in Idle Mode
Specifies the length of time that the current information remains on the display after the extension
returns to idle status.
Default
5 s
Value Range
1–15 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
None
Voice Mail (Caller from VM to CO)—On-hook Wait Time
Specifies the length of time from...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-118.png "Page 119
2.8 [2] System
PC Programming Manual 119
Feature Manual References
1.5.9 External Sensor
PT Display—PT Last Display Duration in Idle Mode
Specifies the length of time that the current information remains on the display after the extension
returns to idle status.
Default
5 s
Value Range
1–15 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
None
Voice Mail (Caller from VM to CO)—On-hook Wait Time
Specifies the length of time from...")
2.8 [2] System PC Programming Manual 119 Feature Manual References 1.5.9 External Sensor PT Display—PT Last Display Duration in Idle Mode Specifies the length of time that the current information remains on the display after the extension returns to idle status. Default 5 s Value Range 1–15 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature Manual References None Voice Mail (Caller from VM to CO)—On-hook Wait Time Specifies the length of time from...
Page 120
![Page 120
2.8 [2] System
120 PC Programming Manual
Default
160 ms
Value Range
80 ms, 160 ms, 240 ms, 320 ms
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
None
During Conversation—DTMF Inter-digit Pause
Specifies the length of time between DTMF signals when numbers are dialed in succession from a
PT or PS during a conversation.
Default
112 ms
Value Range
64 + 16 × n (n=0–15) ms
Maintenance Console Location
2.8.4 [2-3] Timers & Counters...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-119.png "Page 120
2.8 [2] System
120 PC Programming Manual
Default
160 ms
Value Range
80 ms, 160 ms, 240 ms, 320 ms
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
None
During Conversation—DTMF Inter-digit Pause
Specifies the length of time between DTMF signals when numbers are dialed in succession from a
PT or PS during a conversation.
Default
112 ms
Value Range
64 + 16 × n (n=0–15) ms
Maintenance Console Location
2.8.4 [2-3] Timers & Counters...")
2.8 [2] System 120 PC Programming Manual Default 160 ms Value Range 80 ms, 160 ms, 240 ms, 320 ms Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature Manual References None During Conversation—DTMF Inter-digit Pause Specifies the length of time between DTMF signals when numbers are dialed in succession from a PT or PS during a conversation. Default 112 ms Value Range 64 + 16 × n (n=0–15) ms Maintenance Console Location 2.8.4 [2-3] Timers & Counters...