Panasonic Kx Taw848 Feature Manual

1.17 Message Features
Feature Guide 121
Message Waiting Notification via Voice Mail DPT (Digital) Integration
If a voice message is left for the called extension, the notification will be cleared after each 
new message has been played. (  1.19.2 Voice Mail DPT (Digital) Integration)
Message Waiting Notification via Voice Mail DTMF Integration
If a voice message is left for the called extension, the notification will be cleared either by 
the PBX after the MESSAGE button (or a Message button) is...

1.17 Message Features
122 Feature Guide
Note
The % shown above indicates a parameter to be entered when assigning a message at 
an individual extension.
Up to seven %s can be stored for each message.
Conditions
An extension user can select only one Absent Message at a time. The selected message 
is displayed at the extension while on-hook.
The caller must use a display proprietary telephone (PT) to see the Absent Message.
User Manual References
User Manual
1.5.2 Absent Message
3.1.2 Settings on the...

1.18 Proprietary Telephone (PT) Features
Feature Guide 123
1.18 Proprietary Telephone (PT) Features
1.18.1 Fixed Buttons
Description
Proprietary telephones (PTs) and DSS Consoles feature a wide variety of feature buttons and 
Line Access buttons, explained below.
Note that certain models do not feature certain buttons.
For a description of the buttons found on portable station (PS), please refer to the Operating 
Instructions for each PS.
[PT]
Button Usage
Navigator Key, 
Volume KeyUsed to adjust the...

1.18 Proprietary Telephone (PT) Features
124 Feature Guide
[DSS Console]
Conditions
Certain buttons are equipped with a light to indicate the status of the corresponding line 
or feature.
1.18.2 Flexible Buttons
Description
Flexible buttons are customized through either system or personal programming. The following 
types of flexible buttons are found on proprietary telephones (PTs), DSS Consoles, and/or 
portable stations (PSs):
a)Flexible CO buttons INTERCOMUsed to make or receive intercom calls.
AUTO...

1.18 Proprietary Telephone (PT) Features
Feature Guide 125
b)Flexible Direct Station Selection (DSS) buttons
c)Programmable Feature (PF) buttons
[Button Usage]
Button Usage
Single-CO (S-CO)Used to access a specified CO line for making or receiving 
calls. (  1.5.5.3 CO Line Access)
Group-CO (G-CO)Used to access an idle CO line in a specified CO line group 
for making calls. Incoming calls from CO lines in the assigned 
CO line group arrive at this button. (  1.5.5.3 CO Line 
Access)
Loop-CO (L-CO)Used to...

1.18 Proprietary Telephone (PT) Features
126 Feature Guide
User Manual References
User Manual
3.1.3 Customizing the Buttons Call LogUsed to show a log of received calls. (  1.16.2 Incoming Call 
Log)
Log-in/Log-out*Used to switch between Log-in and Log-out status. (  
1.2.2.6 Log-in/Log-out)
Hurry-upUsed to redirect the longest waiting call in the queue of an 
ICD group to the overflow destination. (  1.2.2.3 Queuing 
Feature)
Wrap-up*Used to switch between Wrap-up/Not Ready and Ready 
modes. (  1.2.2.6...

1.18 Proprietary Telephone (PT) Features
Feature Guide 127
1.18.3 LED Indication
Description
The LED of the Message/Ringer Lamp and the following buttons (Line Status Buttons and 
Corresponding Extension Status Button) can indicate line status with a variety of light patterns.
Line Status Buttons: S-CO, G-CO, L-CO, INTERCOM, G-DN
Corresponding Extension Status Button: DSS
1.Light Pattern of the Message/Ringer Lamp
Incoming call: Red flashing
Message(s) present (no incoming call): Red on
No message(s)...

1.18 Proprietary Telephone (PT) Features
128 Feature Guide
3.Light Pattern of the Corresponding Extension Status Button
*1: Only when Call Pickup by a DSS button is disabled.*2: Only when Call Pickup by a DSS button is enabled.
4.Flashing Light Patterns
Conditions
The incoming CO line call shows on the buttons in the following priority:
G-DN S-CO G-CO L-CO INTERCOM
The light pattern of a DSS button for incoming calls can be set to Off through system 
programming. In this case, the DSS button light will...

1.18 Proprietary Telephone (PT) Features
Feature Guide 129
1.18.4 Display Information
Description
A display proprietary telephone (PT) can relay the following information to the user while 
making or receiving calls:
Conditions
Multilingual Display
Each extension can select its display language through personal programming (Display 
Language Selection). 
Characters (name) or digits (number) exceeding the display’s limitations are not displayed. 
Although in this case information may not be displayed...

1.19 Voice Mail Features
130 Feature Guide
1.19 Voice Mail Features
1.19.1 Voice Mail (VM) Group
Description
A Panasonic Voice Processing System (VPS) or similar product from another manufacturer 
can provide Voice Mail (VM) and Automated Attendant (AA) services when connected to the 
PBX.
VM service allows callers to leave voice messages in the VM mailboxes of the desired par ty. 
AA service allows callers to dial a number and connect themselves to an extension by following 
directions provided by a...