Panasonic Kx Ta824 Programming Manual

							9.2 Extension [2]
Programming Manual 161
Value Range
Log-in, Log-out
Feature Manual References
1.1.80 Log-in/Log-out
Operating Manual References
1.3.59 Log-in/Log-out
MW for Another Ext. Lock
Enables the authorization to lock message waiting indications to prevent others from viewing, calling back 
or clearing message waiting indications left at a users extension. If this setting is enabled, the code to lock 
and unlock message waiting indications can be specified.
Default
All jacks: Off
Value Range
lock, code
lock: On (checked), Off (unchecked)
code: 4 digits (4000–9999)
Feature Manual References
1.1.83 Message Waiting for Another Extension
Operating Manual References
1.3.62 Message Waiting for Another Extension Lock
Paging Deny
Enables the prevention of being paged by other extensions.
Default
All jacks: Off
Value Range
On (checked), Off (unchecked)
Feature Manual References
1.1.92 Paging—SUMMARY
Operating Manual References
1.3.73 Paging Deny 
						

							9.2 Extension [2]
162 Programming Manual
Monitored PT set
This program is available only for the extensions enabled in Room Monitor on the 9.2.1 Main [2-1] screen.
To set the Room Monitor feature at the monitored extension, select the check box for the extension in this 
program, and then press the AUTO ANS button of the extension to be monitored.
Default
All jacks: Off
Value Range
On (checked), Off (unchecked)
Programming Manual References
9.2.1 Main [2-1]—Room Monitor
Feature Manual References
1.1.110 Room Monitor
Operating Manual References
1.3.80 Room Monitor
LCS Password
Specifies the Live Call Screening (LCS) password to prevent the unauthorized screening of calls.
Default
All jacks: — (Not stored)
Value Range
3 digits (consisting of 0–9)
Feature Manual References
1.1.77 Live Call Screening (LCS) (Voice Mail APT Integration only)
Operating Manual References
1.3.56 Live Call Screening (LCS) (Voice Mail APT Integration only) 
						

							9.2 Extension [2]
Programming Manual 163
Page 3
Jack
Indicates the jack number (reference only).
Value Range
01–24
Extension
Indicates the extension number and name (reference only).
Value Range
Extension no. and name specified in Ext. no. and Name on the 9.1.3 Numbering Plan [1-3] screen
Programming Manual References
9.1.3 Numbering Plan [1-3]—Ext. no., Name
Hot Line for SLT
Enables the Hot Line feature.
Default
All jacks: Off [set], — (Not stored) [phone no.]
Value Range
set, phone no.
set: On (checked), Off (unchecked)
phone no: Max. 32 digits (consisting of 0–9,  , and P [pause]) 
						

							9.2 Extension [2]
164 Programming Manual
Feature Manual References
1.1.66 Hot Line
Operating Manual References
1.3.50 Hot Line
Timed Reminder
Enables the Timed Reminder feature. When One Time or Daily is selected, the setting time can be 
specified. 
Default
All jacks: Cancel
Value Range
Cancel, One Time (AM12:00–PM11:59), Daily (AM12:00–PM11:59)
Feature Manual References
1.1.115 Timed Reminder
1.1.116 Timed Reminder, Remote
Operating Manual References
1.3.84 Timed Reminder
2.1.10 Timed Reminder, Remote (Wake-up Call)
Voice Mail Integration
Selects the Follow-on ID format required by your Voice Processing System (VPS).
Default
All jacks: B: send #6+ext no.
Value Range
Cancel, A: send ext no., B: send #6+ext no.
Feature Manual References
1.1.121 Voice Mail Inband (DTMF) Integration
Operating Manual References
1.3.88 Voice Mail Integration
9.2.3 PT personal settings [2-3]
Various personal programming settings on a proprietary telephone (PT) can be programmed for each 
extension. This screen is divided into 2 pages, each containing different settings. To show all parameters for 
a certain jack or extension, double-click the relevant Jack or Extension Number cell. 
						

							9.2 Extension [2]
Programming Manual 165
Page 1
Jack
Indicates the jack number (reference only).
Value Range
01–24
Extension
Indicates the extension number and name (reference only).
Value Range
Extension no. and name specified in Ext. no. and Name on the 9.1.3 Numbering Plan [1-3] screen
Programming Manual References
9.1.3 Numbering Plan [1-3]—Ext. no., Name
Line Preference—Outgoing
Selects the line to be seized after going off-hook to make a call.
Default
All jacks: No Line
Value Range
No Line, Idle Line, CO 1–8 
						

							9.2 Extension [2]
166 Programming Manual
Feature Manual References
1.1.76 Line Preference—Outgoing
Operating Manual References
3.1.2 Personal Feature Assignment—Line Preference—Outgoing
Line Preference—Incoming
Selects the line on which an incoming call is answered after going off-hook.
Default
All jacks: Ringing Line
Value Range
No Line, Ringing Line, CO 1–8
Feature Manual References
1.1.75 Line Preference—Incoming
Operating Manual References
3.1.2 Personal Feature Assignment—Line Preference—Incoming
CO Line Ringing Selection—CO1–8
Specifies whether an extension will ring when receiving a call from an outside (CO) line.
Default
All jacks: On
Value Range
On (checked), Off (unchecked)
Feature Manual References
1.1.90 Outside (CO) Line Ringing Selection
Operating Manual References
3.1.2 Personal Feature Assignment—Outside (CO) Line Ringing Selection 
						

							9.2 Extension [2]
Programming Manual 167
Page 2
Jack
Indicates the jack number (reference only).
Value Range
01–24
Extension
Indicates the extension number and name (reference only).
Value Range
Extension no. and name specified in Ext. no. and Name on the 9.1.3 Numbering Plan [1-3] screen
Programming Manual References
9.1.3 Numbering Plan [1-3]—Ext. no., Name
Extension Password
Specifies the extension password used for the Walking COS feature and the Remote Extension Lock 
feature. The extension password should be unique to that extension.
Default
All jacks: — (Not stored) 
						

							9.2 Extension [2]
168 Programming Manual
Value Range
4 digits (consisting of 0–9)
Feature Manual References
1.1.87 Operator/Manager Features
Operating Manual References
2.1.7 System Feature Assignment—Extension Password Set (Manager only)
Alternate Receiving
Selects the method of receiving intercom calls.
Default
All jacks: Tone Call
Value Range
Tone Call, Voice Call
Feature Manual References
1.1.69 Intercom Call
Operating Manual References
3.1.2 Personal Feature Assignment—Alternate Receiving—Ring/Voice
Call Waiting Tone Type
Selects the type of Call Waiting tone to receive when an extension is busy and a new call arrives.
Default
All jacks: Tone 1
Value Range
Tone 1, Tone 2
Feature Manual References
1.1.27 Call Waiting
Operating Manual References
3.1.2 Personal Feature Assignment—Call Waiting Tone Type Selection
LCS Mode
Selects whether the extensions mailbox is monitored in Hands-free or Private mode.
Default
All jacks: Hands-free 
						

							9.2 Extension [2]
Programming Manual 169
Value Range
Hands-free, Private
Hands-free: The extension user can screen calls automatically through the built-in speaker.
Private: The extension user will hear an alert tone when a message is being recorded in his or her mailbox. 
To screen calls, the extension user must press the MONITOR, SP-PHONE, or LCS button.
Feature Manual References
1.1.77 Live Call Screening (LCS) (Voice Mail APT Integration only)
Operating Manual References
3.1.2 Personal Feature Assignment—Live Call Screening (LCS) Mode Set
9.2.4 Flexible Buttons [2-4]
Each flexible CO, Programmable Feature (PF), or MESSAGE button can be customized to allow one-touch 
access to a certain feature. The button settings of an extension can be copied to other extensions. Select 
the extension whose buttons you want to copy from the Extension jack list, then click Copy.
Clicking a CO button opens the 9.2.5 Flexible Buttons [2-4] CO buttons screen, which allows you to 
specify the feature to be assigned to a flexible CO button on the selected extension. 
Clicking a PF button opens the 9.2.6 Flexible Buttons [2-4] PF buttons screen, which allows you to specify 
the feature to be assigned to a PF button on the selected extension.
Clicking the Message button opens the 9.2.7 Flexible Buttons [2-4] Message button screen, which allows 
you to specify the feature to be assigned to the MESSAGE button on the selected extension.
Extension jack
Selects the jack number of the extension to edit. The extension number and name are shown with the jack 
number.
Value Range
Jack 01–24 (Extension no. and name specified in Ext. no. and Name on the 9.1.3 Numbering Plan [1-3] 
screen) 
						

							9.2 Extension [2]
170 Programming Manual
Programming Manual References
9.1.3 Numbering Plan [1-3]—Ext. no., Name
CO buttons
Each CO button can be customized to access a certain feature with a one-touch operation.
Default
 Button 1–8: Single CO (CO Line Number 1–8), Button 9–12: Not Stored
Value Range
Not Stored, Single CO, Group CO, Direct Station Selection (DSS), One-touch Dialing, Other CO, 
Conference, FWD/DND, Saved Number Redial, Caller ID Indication—Personal, Caller ID Selection—
Personal, Log-in/Log-out, 2-way Record, 2-way Transfer, Live Call Screening (LCS), LCS Cancel, Voice Mail 
Transfer, Another Extension Message Waiting, Caller ID Indication—Common, Caller ID Selection—
Common
Programming Manual References
9.2.5 Flexible Buttons [2-4] CO buttons
Feature Manual References
1.1.61 Flexible Buttons
Operating Manual References
3.1.3 Flexible Button Assignment
PF buttons
Each PF button can be customized to access a certain feature with a one-touch operation.
Default
All buttons: Not Stored
Value Range
Not Stored, One-touch Dialing
Programming Manual References
9.2.6 Flexible Buttons [2-4] PF buttons
Feature Manual References
1.1.61 Flexible Buttons
Operating Manual References
3.1.3 Flexible Button Assignment
Message button
The Message button can be customized to access a certain feature with a one-touch operation.