Panasonic Kx P8410 Operating Instructions Manual

							51
Setup
Click Network printer, then click  Next>.
Click  Browse....
Select the KX-P8410 printer.
Click  OK .
Click  Next> .
If the server does not have the Printer Driver for Windows 95, click 
Have Disk... .
The Install From Disk window is displayed.
Click  Browse....
Insert the KX-P8410 CD-ROM into CD-ROM drive.
Select the CD-ROM drive.
Open Win95, Disk2, then select KXP8410.inffile. Click  Open.
The Printer Drivers for Windows 95 window is displayed.
Click  OK.
The Install From Disk window is displayed.
Click  OK.
Click  Next>.
Click  Finish .
5
6
7
8
9
10
11
12
13
14
15
16
17 
						

							52
Setup
nRemoving the Printer Driver
Click  Start , move the pointer to Settingsand click Printers.
Select Panasonic KX-P8410.
Click Filemenu, then click Delete.
Click  Ye s.1
2
3
4 
						

							53
Setup
If you need to remove the KX-P8410 software, perform the following steps.
nFor Windows 3.1 users:
From the Program Managerdouble click the Panasonic 
KX-P8410 Utilitiesicon.
Double click the Uninstall Utilitiesicon.
Click  Yes .
Follow the instructions on the screen.
nFor Windows 95 / Windows NT 4.0 users:
Click  Start  , move the pointer to Programs, then to 
KX-P8410 Utilities.
Click  Uninstall  .
Click  Yes .
Follow the instructions on the screen.
Note:
BFor removing the Panasonic KX-P8410 icon in the Printer Folder, refer to Help
in Windows 95 / Windows NT 4.0.
1
2
1
2
3
4
Removing the KX-P8410 Software
3
4 
						

							54
Setup
Installing Panasonic Font Manager
The Panasonic Font Manager is included in the KX-P8410 CD-ROM.
To install the above application, perform the following steps.
nFor Windows 3.1 users:
Start Windows 3.1.
Quit all applications.
Insert the KX-P8410 CD-ROMinto your computer CD-ROM drive.
Click  File from the Program Manager, then click  Run....
Click  Browseand select your CD-ROM drive from the [Drives:]
box.
Select Install.exe in the Fontdirectory, and click  OK.
Click  OK.
The installer starts.
Follow the instructions on the screen to complete the installation.
1
2
3
4
5
6
7
8 
						

							55
Setup
nFor Windows 95 / Windows NT 4.0 users:
Start Windows 95 / Windows NT 4.0.
Quit all applications.
Insert the KX-P8410 CD-ROMinto your computer CD-ROM drive.
Click  Start , move the pointer to Run..., then click  Run.
Click  Browseand select your CD-ROM drive.
Select Install.exe in the Fontsfolder, and click  OPEN.
Click  OK.
The installer starts.
Follow the instructions on the screen to complete the installation.
Note:
BWhen you insert CD-ROM into your drive, application installer may start
automatically. In this case, quit the Panasonic quick installer and use the
application installer. 
For information on how to use the applications, refer to their manuals.
1
2
3
4
5
6
7
8 
						

							56
The printer panel provides an interface to adjust the density of the toner applied to
the media. This feature compensates for the changes in density that can occur as
environmental conditions changes, toner cartridges or the imaging unit age.
Perform the following steps to adjust the color density:
To print a Color Calibration Page:
#Press the MENU/EXITbutton on the printer panel.
$Press the Fbutton.
%Press the ENTERbutton.
&Press the Fbutton 5 times and the following is displayed.
Press the ENTERbutton.
A Color Calibration Page will be printed.
1
Setup
Setting the Color Density
Menu Mode
Test Page
Menu Mode
Color Calibration
Color Calibration
Calibration Offset
Color Calibration
Calibration Test Print
MENU
/EXIT
CONTINUE CANCELENTERREADY
ERORR
F IMENU/EXIT ENTER 
						

							57
Setup
Color Calibration Page (Example): The current density setting for each color is indicated by the line enclosure on the
Color Calibration Page as shown in the following example.
The factory default setting for each color density is 0.
Current color
density settings 
						

							58
Setup
Compare the current color density settings on the Color
Calibration Page with the color density samples on the Color
Calibration Card to see if they match. 
Place the Color Calibration Page on at least 2 sheets of clean white paper in a
well-lighted area.
BIf they match, then you do not need to adjust the color density
and you may proceed with any operation you wish to perform.
BIf they do not match, go to step 3.
Determine which block on the Color Calibration Page most
closely matches the density of the cyan sample on the Color
Calibration Card. 
BRepeat step 3 for each color.
2
3
Color Calibration
Card
Color Calibration
Page 
						

							59
Setup
If you wish to adjust the density for all colors simultaneously,
perform the following, then go to step 5.
#Repeat instructions #through %of step 1 on page 56.
$Press the ENTERbutton.
%Press the F/Ibutton to darken/lighten all the colors.
Pressing the F/Ibutton twice selects the next/previous level settings.
(For example:)
BIf you wish to make the density setting darker by 2 levels:
¾ Press the Fbutton 4 times.
BIf you wish to make the density setting lighter by 1 level:
¾ Press the Ibutton 2 times.
&Press the ENTERbutton.
Press the Fbutton 4 times and the following is displayed.
Color Calibration 
Calibration Offset
Calibration Offset
0* (-5 to 5)
Color Calibration 
CYAN
Color Calibration 
Calibration Test Print
4A 
						

							60If you wish to adjust the density for each color independently,
perform the following, then go to step 5.
#Repeat instructions #through %of step 1 on page 56.
$Press the F button.
%Press the ENTERbutton.
&Press the F/Ibutton to darken/lighten the cyan color.
Pressing the F/Ibutton twice selects the next/previous level setting.
(For example:)
BIf you wish to make the density setting darker by 4 levels:
¾ Press the Fbutton 8 times.
BIf you wish to make the density setting lighter by 2 levels:
¾ Press the Ibutton 4 times.
Press the ENTERbutton.
(Repeat instructions %through for each color 
(MAGENTA, YELLOW, BLACK).
BTo skip a color, press the Fbutton.
BTo return to a previous color, press the Ibutton.
BBefore going to step 5, make sure the following is displayed.
Press the ENTERbutton to reprint the Color Calibration Page.
BThe line enclosure reflects the changes made to the settings.
BIf you are not satisfied with the current color density settings, repeat steps 4
and 5 above.
Notes:
BThe color density setting affects the average life of toner.
BSave the Color Calibration Card for future calibrations.
Color Calibration 
CYAN
Color Calibration 
Calibration Test Print
CYAN
0* (-10 to 10)
Color Calibration 
MAGENTA
4B
5
Setup