Panasonic Kx P7305 Operating Instructions Manual

Specifications
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.59
Connector type:36PIN Anphenole connector
Cable:use a shielded cable 2 meters (6.6 feet) or less in length
Pin configuration
Parallel (IEEE1284) Interface connector (printer side)
Parallel (IEEE1284) Interface 
PinSignal
1nStrobe
2 Data 1
3 Data 2
4 Data 3
5 Data 4
6 Data 5
7 Data 6
8 Data 7
9 Data 8
10 nAck
11 Busy
12 PError
13 Select
14 nAutoFd
15 NC
16 GND
17 FG
18 Peripheral Logic High
PinSignal
19 GND
20 GND
21...

Specifications
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.60
CAUTION
• If the cable is connected to PC via printer buffer or selector, the printer may not print.
• A print server cannot be used for printing.
NOTE
• Be sure to use only a shielded cable. The printer will not operate properly if any of the pins 
are not connected. 

Specifications
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.61
Cable: It is recommended to use a cable 2 m (6.6 feet) or less in length.
Pin configuration
USB Interface connector (printer side)
NOTE
• Be sure to use a high- / full-speed shielded cable (12 Mbps or 480 Mbps) which the Data + 
and Data – cables are the twisted pair.
• When using the printer and other USB devices simultaneously, we cannot guarantee normal 
printing.
• Be sure to use a High-Speed USB 2.0 certified...

Settings and Printing
Network Network Maintenance and Spec.1
Features  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Setup in Windows  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Selecting the Printing Method  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Contents of the Printer Software  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
LPR Port Printing using TCP/IP in Windows . . . . . . . . . . ....

Settings and Printing
Network Network Maintenance and Spec.
Features
2
This chapter explains how to configure the KX-P7310 printer on a supported network 
environment. The KX-P7310 printer provides Ethernet connectivity to function as a network 
printer. The KX-P7310 network function has the following features:
Supports 100Base-TX and 10Base-T
Supports the following network operating systems
• Windows® 95*
1 / Windows 98*2 / Windows Me*3 / Windows NT® 4.0*4 / Windows 2000*5, 
Windows XP*
6 / Windows...

Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
3
This chapter explains how to set up LPR port and IPP port printing in Windows*1 (Windows 
95, Windows 98, Windows Me, Windows NT 4.0, Windows 2000, Windows XP and Windows 
Server 2003 environment).
When installing the KX-P7310 software, refer to “Contents of the Printer Software” on page 5.
■Selecting the Setup Method
When setting up printing with printer software provided, you can select Quick Printer Setup 
or Custom Printer...

Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
4
There are two methods of network printing.
• Printing directly from a computer
• Printing through a shared computer (server)
You may need to consult with your network administrator which to select.
■Printing directly from a computer
The computer's print data is transferred directly to the printer. This method is recommended 
for a small network and has the advantage of faster printing with less network traffic.
■Printing...

Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
5
The following software is included in the printer’s CD-ROM disk. You can selectively install 
each application using the installer on the CD-ROM.
■Printer Driver and Utilities
When installing the printer driver and manual, the following utilities and manual are installed. 
See “Windows” section of "Settings and Printing" in the Operating Instructions how to use 
each software utility.
(1) PCL 6 printer driver
(2)...

Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
6
■Web Administrative Tool
Manages the printer by showing the status of the device connected to the network and can 
change configurations. This allowes an administrator to manage a printer using this tool. 
Before installing or using, see the help menu for Web Administrative Tool.
To see the help menu,
(1) Insert the printer CD-ROM disk into the CD-ROM drive.
(2) Start the browser (Microsoft Internet Explorer 4.x or later /...

Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
7
The following method [A] or [B] is the steps to set up an LPR Port printing using TCP/IP in 
Windows.
[A] Printing directly from a computer (see page 8)
Step 1: Setting up TCP/IP on the computer
Step 2: Setting up TCP/IP on the printer
Step 3: Setting up the printer driver and the printer port on the computer
Step 4: Setting up another computer
[B] Printing through the shared computer (print server) (see page 21)
Step 1:...