Home > Panasonic > Printer > Panasonic Kx P7305 Operating Instructions Manual

Panasonic Kx P7305 Operating Instructions Manual

Here you can view all the pages of manual Panasonic Kx P7305 Operating Instructions Manual. The Panasonic manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 151

Troubleshooting
Settings and Printing NetworkMaintenance and Spec.
Maintenance and Spec.29
A white or black spots 
appear in intervals of 94 
mm (3.7
″). Paste/Glue of a label or dust is 
attached to the photosensitive 
drum. Wipe the photosensitive drum 
(
see “Cleaning the 
Photosensitive Drum” on page 
37
).
The photosensitive drum is dirty or 
scratched. Replace the drum unit.
Edge(s) of the sheet is 
stained. The photosensitive drum is 
stained. Wipe the photosensitive drum 
(
see “Cleaning the...

Page 152

Troubleshooting
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.30
Horizontal lines appear
in intervals of 94 mm
(3.7″).A small dust is bitten in the 
gear of the photosensitive 
drum.Remove the dust from the gear 
(see “Cleaning the 
Photosensitive Drum” on page 
37).
White and horizontal 
lines appear on the page.The drum unit is damaged. Replace the drum unit.
The toner cartridge is damaged. Replace the toner cartridge.
The toner cartridge is stored for a 
long period.
(Try...

Page 153

Troubleshooting
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.31
A white vertical line 
appears on the page.The laser unit cover is dirty.
Clean the laser unit cover (see 
“Cleaning the Printer” on page 
8
).
A small matter is mixed with the 
roller of the toner cartridge.Replace the toner cartridge.
The printer prints aslant.  The media is not installed 
correctly.Install media correctly in the 
media tray.
Adjust media guides correctly.
Too much media is loaded in the 
media...

Page 154

Troubleshooting
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.32
The back of the printed 
page appears dirty.The transfer roller or fuser unit is 
contaminated after clearing a jam.Display the Remote Control Panel 
and select Fuser Cleaning from 
the Tool menu to print a cleaning 
data (
see “Remote Control 
Panel” on page 28
 in “Settings 
and Printing”).
The toner cartridge has reached 
the end of useful life.Replace the toner cartridge.
Incorrect type of media is used.
Use a...

Page 155

Troubleshooting
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.33
■If you can’t make a print
TroublePossibleCorrective Action
Printer not operating. The printer may not be plugged 
into an AC outlet or turned on.Make sure that you plugged in the 
printer and turned it on.
The interface cable(s) may not 
be connected properly.Make sure that you connected the 
interface cable(s) properly (
see 
“Parallel (IEEE1284) Interface” on 
page 59
), [see “USB (Universal 
Serial Bus)...

Page 156

Troubleshooting
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.34
RAM Overflow occurs. Printer’s memory is insufficient 
in high resolution setting.Change the resolution for lower setting 
in the printer driver (see 
“Setting the 
Printer Driver” on page 44
, “Setting 
the Printer Specific Options” on 
page 91
 or “Setting the Printer 
Features” on page 110
 in “Settings 
and Printing”).
Install the optional RAM board in the 
printer.
If data is printed in PCL, set the printer...

Page 157

Troubleshooting
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.35
*1Microsoft Windows Server™ 2003 operating system (hereafter Windows Server 2003) The Web 
Administrative Tool 
does not work 
correctly after 
installing it in Windows 
Server™ 2003*
1.As IIS security setting is added 
to Windows Server 2003, CGI 
application cannot run on this 
server by default settings.
The Web Administrative Tool is 
one of the CGI applications.
For the detailed information of 
CGI, refer to...

Page 158

Troubleshooting
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.36
■If the print out is ragged
If the print out is curled as illustrated, this can occur because of the natural curl of the paper, 
remove the media tray from the printer and turn the stack of paper over, then install the media 
tray.
■A tip when printing on transparency
When you notice some straight lines on the projected image on the screen (OHP), it is 
recommended to open the rear cover, so the media is printed...

Page 159

Troubleshooting
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.37
If the paste or glue of a label is attached to the photosensitive drum of the drum unit, clean it 
following the steps below.
1Open the front cover of the printer.
2Lift the drum unit up (1) and slide it out of the printer (2).
3While pushing the drum unit as illustrated below (1), lift the toner 
cartridge up (2).
Cleaning the Photosensitive Drum
1
2
1
2
1 

Page 160

Troubleshooting
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.38
4Remove the toner cartridge from the drum unit.
5If a paste/glue of a label is attached, find the portion that it is attached 
while rotating the gear of the photosensitive drum in the direction of the 
arrow.
•The paste will be attached the portion that white or black spots of the print appear.
CAUTION
To prevent any damage to the drum unit, observe the following precautions.
• Do not rotate the photosensitive...
Start reading Panasonic Kx P7305 Operating Instructions Manual

Related Manuals for Panasonic Kx P7305 Operating Instructions Manual

All Panasonic manuals