Panasonic Kx P7305 Operating Instructions Manual

Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
8
Step 1: Setting up TCP/IP on the computer
If the TCP/IP protocol is already installed on your computer and it is configured, proceed to the 
next step. If it is not installed, you need to install TCP/IP in the operating system on the 
computer and configure it. Be sure to install the TCP/IP protocol as it is not installed by default 
in Windows 95.
If the administrator manages the IP Address, contact him/her to confirm the...

Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
9
[A] Using the DHCP server
If the administrator manages the network with DHCP server, it will automatically assign an IP 
Address, Subnet Mask and Default Gateway. These can be viewed by printing out the 
configuration page. It can be printed by pressing the PRINT/RESET button on the printer 
panel more than 2 seconds and less than 5 seconds.
NOTE
• If the printer receives the IP Address with unlimited lease term, the printer...

Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
10
If the Network Setup Tool is already installed, click [Start] , move the pointer to Programs or 
All Programs, Panasonic and Panasonic KX-P7305 and KX-P7310, then click Network 
Setup Tool.
Proceed to the step 6.
1Insert the printer CD-ROM disk into the CD-ROM drive.
The CD-ROM launches automatically.
NOTE
• If the CD-ROM does not launch automatically, perform the following steps.
(1) Double click My computer icon (Windows XP...

Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
11
4Follow the instructions until the screen below is displayed.
5Click on the Ye s check button, and then [Finish].
The list of KX-7310 printers residing on the network is displayed.
• If you want to search printers in the network again, click the Device menu and select 
Search.  

Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
12
6Click the KX-P7310 printer you want to set up in the list. Then click the 
Setup menu and select Network Setup…. 
NOTE
• When several printers are listed in the Network Setup Tool window, select the printer 
using the Ethernet address (MAC address). You can obtain it (hexadecimal six digits 
number) from the label on the back of the printer or configuration page (press PRINT/
RESET button more than 2 seconds and less than 5...

Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
13
8Remove the check of the Use DHCP/BOOTP and Use LARP check box, 
then enter IP address, Subnet Mask and Default Gateway. Click [OK]. 
9Confirm the setting and click [OK].
You will see the message “Update is completed. Do you wish to reset the printer?”.
10Click [Yes]. 

Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
14
NOTE
• You cannot search for the printer while the printer is restarting.
• To confirm that the IP Address is set correctly,
(1) On your computer, click [Start], select Programs or All Programs, then click
MS-DOS Prompt. (for Windows 95 / Windows 98 / Windows Me)
Or
Command Prompt. (for Windows NT 4.0)
Or
Accessories - Command Prompt. (for Windows 2000 / Windows XP / Windows Server 
2003)
(2) At the DOS prompt, type ping...

Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
15
Step 3: Setting up the printer driver and the printer port on the 
computer
1Insert the printer CD-ROM disk into the CD-ROM drive.
The CD-ROM launches automatically.
NOTE
• If the CD-ROM does not launch automatically, perform the following steps.
(1) Double click My computer icon (Windows XP / Windows Server 2003: Start - My 
Computer).
(2) Double click the CD-ROM icon.
2(Click language and) click KX-P7310.
3Click Install...

Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
16
5Click on the Custom Printer Setup check button and click [Next >].
The Select Setup type window is displayed.
6Click on the Direct Print PC check button and click [Next >]. 

Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
17
7Click on the Select the Network port for KX-P7310 check button and 
click the printer you want to use, then click [Next >].
The Select installed options window is displayed.
8Select the installed options in your printer. Click [Next >].
The Select the default printer window is displayed.