Panasonic KX P7110 User Manual
Have a look at the manual Panasonic KX P7110 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Settings and Printing Network Network Maintenance and Spec. Setup in Windows Settings and Printing Network Network Maintenance and Spec.15 nStep 3: Installing LPR Port on the computer This step explains how to install LPR port monitor for KX-P7110 network printer port. Before installation, confirm that the printer is connected to the network correctly and is ready status. 1Insert the printer CD-ROM into the CD-ROM drive. The CD-ROM launches automatically. NOTE • If the CD-ROM does not launch automatically, perform the following steps (1) - (2). (1)Double click My computer icon. (2)Double click the CD-ROM icon. 2Click KX-P7110. 3Click Install Network Port. Downloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Finish Spool Settings... Start Downloaded From ManualsPrinter.com Manuals OK Spool Settings... Downloaded From ManualsPrinter.com Manuals Start File and Print Sharing... OK Downloaded From ManualsPrinter.com Manuals OK OK Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Windows 95 / Windows 98 / Windows Me 1Click , select Settings and then click Printers. 2Click your printer with the right mouse button. 3Click Properties. 4Click the Details tab. 5Click . The Add Port window is displayed. Browse... OK Next> Finish Start Add Port... Downloaded From ManualsPrinter.com Manuals Browse... OK OK OK Downloaded From ManualsPrinter.com Manuals Windows NT 4.0 / Windows 2000 1Click , select Settings and then click Printers. 2Click the printer with the right mouse button. 3Click Properties. 4Click the Por ts tab. 5Click . 6Click the Local Port for the printer port, and click . 7Enter the path of the printer connecting to the server according to the following form, then click . \\server name\printer name NOTE • You can confirm the server name and printer name as follows: (1) Double click the Network Neighborhood icon (for Windows NT 4.0) or My Network Places icon (for Windows 2000). (2) Double click the server connecting to the printer. 8Click . 9Click to close the printer properties window. Start Add Port... New Port... OK Close OK Downloaded From ManualsPrinter.com Manuals IPP Port Printing using TCP/IP in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port Printing using TCP/IP or IPX/SPX in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Downloaded From ManualsPrinter.com Manuals OK Setup Downloaded From ManualsPrinter.com Manuals OK Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Browse... OK Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... Browse... Downloaded From ManualsPrinter.com Manuals OK OK OKApply Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start OK Add... Downloaded From ManualsPrinter.com Manuals OK Continue Close Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> OK Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OK Start Downloaded From ManualsPrinter.com Manuals OK Separator Page... Browse... Open OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OKClose Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Standard TCP/IP Port printing in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Next> Next> Finish Close Close Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals IPP Port Printing Using TCP/IP in Windows 2000 Start Next> Downloaded From ManualsPrinter.com Manuals Next> Next> OK Have Disk... Browse... OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows 2000 Next> Finish Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.75 KX-P7110 Setup Utility uses TCP/IP. You need to set up AppleTalk and TCP/IP for your computer and printer. The printer does not work with AppleTalk Phase1. The following the outline of the steps how to set up in a Macintosh environment using the AppleTalk protocol. Step 1: Setting AppleTalk and TCP/IP on your computer Step 2: Setting up TCP/IP on the printer nStep 1: Setting AppleTalk and TCP/IP on your computer 1Select Control Panels from the Apple menu, then double click AppleTalk icon. 2Select Ethernet from the Connect via box. 3Close the dialog and click Save. 4Double click the TCP/IP icon in the Control Panels. Setup in Macintosh Downloaded From ManualsPrinter.com Manuals Continue Install Quit Downloaded From ManualsPrinter.com Manuals OK OK OK Downloaded From ManualsPrinter.com Manuals OK Setup OK OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.79 This chapter explains how to set to print from a client computer via the NetWare server. Perform the following steps to set up. Step 1: Setting up the printer and the server(see page 79) Step 2: Setting up the client (for Windows 95 / Windows 98 / Windows Me)(see page 99) nStep 1: Setting up the printer and the server There are three ways of setup. •Using NDS (Novell Directory Service) - PSERVER mode(see page 80) •Using NDS - RPRINTER (NPRINTER) mode(see page 86) •Using Bindery - PSERVER mode(see page 93) You may need to consult with your network administrator which to select. For the detailed information of these modes, refer to the NetWare online manual. The setting of the NetWare server is almost performed on the client. You must login into the server using the supervisor privilege. Novell Client software must be installed in your computer prior to setting up. NOTE • You can also perform the NDPS printing. For the detailed information, see the home page of Novell. Setup in NetWare In NetWare 4.x / NetWare 5 Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup NDS Setup Setup OKYes Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup OKYes Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup... Downloaded From ManualsPrinter.com Manuals OK Setup Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals In NetWare 3.x Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.106 This chapter explains how to set up printing in various UNIX environments. Supported UNIX variants are as follows: • Solaris 2.6 • Solaris 2.3x – 2.5x • HP-UX 9.x and 10.x • AIX 4.xx • BSD UNIX There are two ways of printing. • Printing using LPD • Printing using FTP LPD (Line Printer Daemon) is a network printing protocol and programs associated with printer spooling service installed on TCP/IP systems. Perform the following steps to set up. Step1: Setting up TCP/IP for the printer Step 2: Adding the printer to UNIX systems Step 3: Setting up print queues nStep1: Setting up TCP/IP for the printer Refer to “Step 2: Setting up TCP/IP for the printer” on page 9 in “LPR Port printing using TCP/ IP in Windows 95 / Windows 98 / Windows Me”. nStep 2: Adding the printer to UNIX systems Perform the following steps to add the printer as a network printer to UNIX systems. When editing the hosts file, contact your network administrator. Setup in UNIX Printing using LPD Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Printing using FTP Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.115 If an IP address have been assigned to a printer, you can access the printer’s Web Server. It allows monitoring or setting the printer. 1Open the browser (Internet Explorer or Netscape). 2Enter a printer address in the Address box and press Return key. The Web Server screen is displayed. Ex. http://172.16.xxx.xxx/ 1Display the Web Server screen (see above). 2Click Network Setup in the left pane. The Enter Network Password window is displayed. 3Type root in the User name box and click . •If the password is already set, the password must be entered in the Password box. 4Click the menu item (TCP/IP, NetWare...) and change the setting. Using the Web Server Displaying the Web Server Screen Setting the Printer OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.119 Press PRINT/RESET button on the printer panel less than 5 seconds to print the configuration page. It enables to reset the printer’s network settings to the factory default settings. 1Display the Network Setup Tool. •To display the Network Setup Tool window, refer to “Step 1: Setting up TCP/IP on the computer” on page 8 or “Step 2: Setting up TCP/IP on the printer” on page 76 2Click the KX-P7110 printer you want to set up in the list. 3Click the Setup menu, then click Network Factory Default. Printing a Configuration Page Resetting the Printer Settings to Factory Default Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use AppleTalk Protocol ENABLE Enables or disables AppleTalk protocol. Printer Name KX-P7110-xxxxxx Sets AppleTalk printer name. The name you set here can be seen from Selector. Zone Name * Sets zone name to which KX-P7110 belongs. If blank, KX-P7110 will automatically belongs to the zone name where AppleTalk router is set. nameFactory DefaultDescription Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use NetBEUI Protocol ENABLE Enables or disables NetBEUI protocol. Computer Name KXPxxxxxx Sets Computer name. This name is shown as the computer in Windows Explorer. Workgroup KXP-Printer Sets the workgroup to which KX-P7110 belongs. Comment Panasonic KX-P7110This comment is shown as the computer in Windows Explorer. nameFactory DefaultDescription Authentic Community ****** Sets SNMP authentic community name. This community name is authenticated when receiving SNMP Set Request. Use Authentic Trap DISABLE Enables or disables authentic trap. TRAP Community public Enters TRAP community name. This name will be used when the printer executes a trap. TRAP Address 0.0.0.0 Enters the TRAP address. The TRAP address is disabled if the IP address is set 0.0.0.0. SysContact NULL Enters SysContact for MB-II object. Normally enter the administrator™s mail address. SysName NULL Enters SysName for MB-II object. Normally enter the host name or domain name. SysLocation NULL Enters SysLocation for MB-II object. Normally enter where the printer is located. Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription lp Port BOJ String NULL Sets the string that will be sent before sending a print job to the direct output port(lp). EOJ String NULL Sets the string that will be sent at the end of a print job to the direct output port(lp). enc/sjis Port BOJ String NULL Sets the string sent before sending the printing job to the output port via Kanji filter(sjis, euc). EOJ String \f Sets the string that will be sent at the end of the printing job to the output port via Kanji filter (sjis, euc). Printer Emulation ASCII Sets printer emulation (PDL). Changes to appropriate code when printing via Kanji filter (sjis, euc). Tab Size 8 char Sets the number of spaces that correspond to 1 tab. All tab codes will be converted to the spaces according to the number set here. This feature will not be available when this is set to 0 or when the job is directly sent to the printer. Page Width 0 char Sets the number of characters for the auto line feed feature of the Kanji filter. The auto line feed feature is not available when this is set to 0. Page Length 0 line Sets the number of lines for auto page feed feature of the Kanji filter between the number 0-255. The auto page feed feature is not available when this is set to 0. Downloaded From ManualsPrinter.com Manuals
Settings and Printing Network Network Maintenance and Spec. Setup in Windows Settings and Printing Network Network Maintenance and Spec.15 nStep 3: Installing LPR Port on the computer This step explains how to install LPR port monitor for KX-P7110 network printer port. Before installation, confirm that the printer is connected to the network correctly and is ready status. 1Insert the printer CD-ROM into the CD-ROM drive. The CD-ROM launches automatically. NOTE • If the CD-ROM does not launch automatically, perform the following steps (1) - (2). (1)Double click My computer icon. (2)Double click the CD-ROM icon. 2Click KX-P7110. 3Click Install Network Port. Downloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Finish Spool Settings... Start Downloaded From ManualsPrinter.com Manuals OK Spool Settings... Downloaded From ManualsPrinter.com Manuals Start File and Print Sharing... OK Downloaded From ManualsPrinter.com Manuals OK OK Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Windows 95 / Windows 98 / Windows Me 1Click , select Settings and then click Printers. 2Click your printer with the right mouse button. 3Click Properties. 4Click the Details tab. 5Click . The Add Port window is displayed. Browse... OK Next> Finish Start Add Port... Downloaded From ManualsPrinter.com Manuals Browse... OK OK OK Downloaded From ManualsPrinter.com Manuals Windows NT 4.0 / Windows 2000 1Click , select Settings and then click Printers. 2Click the printer with the right mouse button. 3Click Properties. 4Click the Por ts tab. 5Click . 6Click the Local Port for the printer port, and click . 7Enter the path of the printer connecting to the server according to the following form, then click . \\server name\printer name NOTE • You can confirm the server name and printer name as follows: (1) Double click the Network Neighborhood icon (for Windows NT 4.0) or My Network Places icon (for Windows 2000). (2) Double click the server connecting to the printer. 8Click . 9Click to close the printer properties window. Start Add Port... New Port... OK Close OK Downloaded From ManualsPrinter.com Manuals IPP Port Printing using TCP/IP in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port Printing using TCP/IP or IPX/SPX in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Downloaded From ManualsPrinter.com Manuals OK Setup Downloaded From ManualsPrinter.com Manuals OK Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Browse... OK Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... Browse... Downloaded From ManualsPrinter.com Manuals OK OK OKApply Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start OK Add... Downloaded From ManualsPrinter.com Manuals OK Continue Close Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> OK Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OK Start Downloaded From ManualsPrinter.com Manuals OK Separator Page... Browse... Open OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OKClose Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Standard TCP/IP Port printing in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Next> Next> Finish Close Close Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals IPP Port Printing Using TCP/IP in Windows 2000 Start Next> Downloaded From ManualsPrinter.com Manuals Next> Next> OK Have Disk... Browse... OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows 2000 Next> Finish Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.75 KX-P7110 Setup Utility uses TCP/IP. You need to set up AppleTalk and TCP/IP for your computer and printer. The printer does not work with AppleTalk Phase1. The following the outline of the steps how to set up in a Macintosh environment using the AppleTalk protocol. Step 1: Setting AppleTalk and TCP/IP on your computer Step 2: Setting up TCP/IP on the printer nStep 1: Setting AppleTalk and TCP/IP on your computer 1Select Control Panels from the Apple menu, then double click AppleTalk icon. 2Select Ethernet from the Connect via box. 3Close the dialog and click Save. 4Double click the TCP/IP icon in the Control Panels. Setup in Macintosh Downloaded From ManualsPrinter.com Manuals Continue Install Quit Downloaded From ManualsPrinter.com Manuals OK OK OK Downloaded From ManualsPrinter.com Manuals OK Setup OK OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.79 This chapter explains how to set to print from a client computer via the NetWare server. Perform the following steps to set up. Step 1: Setting up the printer and the server(see page 79) Step 2: Setting up the client (for Windows 95 / Windows 98 / Windows Me)(see page 99) nStep 1: Setting up the printer and the server There are three ways of setup. •Using NDS (Novell Directory Service) - PSERVER mode(see page 80) •Using NDS - RPRINTER (NPRINTER) mode(see page 86) •Using Bindery - PSERVER mode(see page 93) You may need to consult with your network administrator which to select. For the detailed information of these modes, refer to the NetWare online manual. The setting of the NetWare server is almost performed on the client. You must login into the server using the supervisor privilege. Novell Client software must be installed in your computer prior to setting up. NOTE • You can also perform the NDPS printing. For the detailed information, see the home page of Novell. Setup in NetWare In NetWare 4.x / NetWare 5 Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup NDS Setup Setup OKYes Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup OKYes Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup... Downloaded From ManualsPrinter.com Manuals OK Setup Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals In NetWare 3.x Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.106 This chapter explains how to set up printing in various UNIX environments. Supported UNIX variants are as follows: • Solaris 2.6 • Solaris 2.3x – 2.5x • HP-UX 9.x and 10.x • AIX 4.xx • BSD UNIX There are two ways of printing. • Printing using LPD • Printing using FTP LPD (Line Printer Daemon) is a network printing protocol and programs associated with printer spooling service installed on TCP/IP systems. Perform the following steps to set up. Step1: Setting up TCP/IP for the printer Step 2: Adding the printer to UNIX systems Step 3: Setting up print queues nStep1: Setting up TCP/IP for the printer Refer to “Step 2: Setting up TCP/IP for the printer” on page 9 in “LPR Port printing using TCP/ IP in Windows 95 / Windows 98 / Windows Me”. nStep 2: Adding the printer to UNIX systems Perform the following steps to add the printer as a network printer to UNIX systems. When editing the hosts file, contact your network administrator. Setup in UNIX Printing using LPD Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Printing using FTP Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.115 If an IP address have been assigned to a printer, you can access the printer’s Web Server. It allows monitoring or setting the printer. 1Open the browser (Internet Explorer or Netscape). 2Enter a printer address in the Address box and press Return key. The Web Server screen is displayed. Ex. http://172.16.xxx.xxx/ 1Display the Web Server screen (see above). 2Click Network Setup in the left pane. The Enter Network Password window is displayed. 3Type root in the User name box and click . •If the password is already set, the password must be entered in the Password box. 4Click the menu item (TCP/IP, NetWare...) and change the setting. Using the Web Server Displaying the Web Server Screen Setting the Printer OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.119 Press PRINT/RESET button on the printer panel less than 5 seconds to print the configuration page. It enables to reset the printer’s network settings to the factory default settings. 1Display the Network Setup Tool. •To display the Network Setup Tool window, refer to “Step 1: Setting up TCP/IP on the computer” on page 8 or “Step 2: Setting up TCP/IP on the printer” on page 76 2Click the KX-P7110 printer you want to set up in the list. 3Click the Setup menu, then click Network Factory Default. Printing a Configuration Page Resetting the Printer Settings to Factory Default Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use AppleTalk Protocol ENABLE Enables or disables AppleTalk protocol. Printer Name KX-P7110-xxxxxx Sets AppleTalk printer name. The name you set here can be seen from Selector. Zone Name * Sets zone name to which KX-P7110 belongs. If blank, KX-P7110 will automatically belongs to the zone name where AppleTalk router is set. nameFactory DefaultDescription Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use NetBEUI Protocol ENABLE Enables or disables NetBEUI protocol. Computer Name KXPxxxxxx Sets Computer name. This name is shown as the computer in Windows Explorer. Workgroup KXP-Printer Sets the workgroup to which KX-P7110 belongs. Comment Panasonic KX-P7110This comment is shown as the computer in Windows Explorer. nameFactory DefaultDescription Authentic Community ****** Sets SNMP authentic community name. This community name is authenticated when receiving SNMP Set Request. Use Authentic Trap DISABLE Enables or disables authentic trap. TRAP Community public Enters TRAP community name. This name will be used when the printer executes a trap. TRAP Address 0.0.0.0 Enters the TRAP address. The TRAP address is disabled if the IP address is set 0.0.0.0. SysContact NULL Enters SysContact for MB-II object. Normally enter the administrator™s mail address. SysName NULL Enters SysName for MB-II object. Normally enter the host name or domain name. SysLocation NULL Enters SysLocation for MB-II object. Normally enter where the printer is located. Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription lp Port BOJ String NULL Sets the string that will be sent before sending a print job to the direct output port(lp). EOJ String NULL Sets the string that will be sent at the end of a print job to the direct output port(lp). enc/sjis Port BOJ String NULL Sets the string sent before sending the printing job to the output port via Kanji filter(sjis, euc). EOJ String \f Sets the string that will be sent at the end of the printing job to the output port via Kanji filter (sjis, euc). Printer Emulation ASCII Sets printer emulation (PDL). Changes to appropriate code when printing via Kanji filter (sjis, euc). Tab Size 8 char Sets the number of spaces that correspond to 1 tab. All tab codes will be converted to the spaces according to the number set here. This feature will not be available when this is set to 0 or when the job is directly sent to the printer. Page Width 0 char Sets the number of characters for the auto line feed feature of the Kanji filter. The auto line feed feature is not available when this is set to 0. Page Length 0 line Sets the number of lines for auto page feed feature of the Kanji filter between the number 0-255. The auto page feed feature is not available when this is set to 0. Downloaded From ManualsPrinter.com Manuals
Settings and Printing Network Network Maintenance and Spec. Setup in Windows Settings and Printing Network Network Maintenance and Spec.15 nStep 3: Installing LPR Port on the computer This step explains how to install LPR port monitor for KX-P7110 network printer port. Before installation, confirm that the printer is connected to the network correctly and is ready status. 1Insert the printer CD-ROM into the CD-ROM drive. The CD-ROM launches automatically. NOTE • If the CD-ROM does not launch automatically, perform the following steps (1) - (2). (1)Double click My computer icon. (2)Double click the CD-ROM icon. 2Click KX-P7110. 3Click Install Network Port. Downloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Finish Spool Settings... Start Downloaded From ManualsPrinter.com Manuals OK Spool Settings... Downloaded From ManualsPrinter.com Manuals Start File and Print Sharing... OK Downloaded From ManualsPrinter.com Manuals OK OK Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Windows 95 / Windows 98 / Windows Me 1Click , select Settings and then click Printers. 2Click your printer with the right mouse button. 3Click Properties. 4Click the Details tab. 5Click . The Add Port window is displayed. Browse... OK Next> Finish Start Add Port... Downloaded From ManualsPrinter.com Manuals Browse... OK OK OK Downloaded From ManualsPrinter.com Manuals Windows NT 4.0 / Windows 2000 1Click , select Settings and then click Printers. 2Click the printer with the right mouse button. 3Click Properties. 4Click the Por ts tab. 5Click . 6Click the Local Port for the printer port, and click . 7Enter the path of the printer connecting to the server according to the following form, then click . \\server name\printer name NOTE • You can confirm the server name and printer name as follows: (1) Double click the Network Neighborhood icon (for Windows NT 4.0) or My Network Places icon (for Windows 2000). (2) Double click the server connecting to the printer. 8Click . 9Click to close the printer properties window. Start Add Port... New Port... OK Close OK Downloaded From ManualsPrinter.com Manuals IPP Port Printing using TCP/IP in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port Printing using TCP/IP or IPX/SPX in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Downloaded From ManualsPrinter.com Manuals OK Setup Downloaded From ManualsPrinter.com Manuals OK Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Browse... OK Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... Browse... Downloaded From ManualsPrinter.com Manuals OK OK OKApply Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start OK Add... Downloaded From ManualsPrinter.com Manuals OK Continue Close Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> OK Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OK Start Downloaded From ManualsPrinter.com Manuals OK Separator Page... Browse... Open OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OKClose Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Standard TCP/IP Port printing in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Next> Next> Finish Close Close Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals IPP Port Printing Using TCP/IP in Windows 2000 Start Next> Downloaded From ManualsPrinter.com Manuals Next> Next> OK Have Disk... Browse... OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows 2000 Next> Finish Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.75 KX-P7110 Setup Utility uses TCP/IP. You need to set up AppleTalk and TCP/IP for your computer and printer. The printer does not work with AppleTalk Phase1. The following the outline of the steps how to set up in a Macintosh environment using the AppleTalk protocol. Step 1: Setting AppleTalk and TCP/IP on your computer Step 2: Setting up TCP/IP on the printer nStep 1: Setting AppleTalk and TCP/IP on your computer 1Select Control Panels from the Apple menu, then double click AppleTalk icon. 2Select Ethernet from the Connect via box. 3Close the dialog and click Save. 4Double click the TCP/IP icon in the Control Panels. Setup in Macintosh Downloaded From ManualsPrinter.com Manuals Continue Install Quit Downloaded From ManualsPrinter.com Manuals OK OK OK Downloaded From ManualsPrinter.com Manuals OK Setup OK OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.79 This chapter explains how to set to print from a client computer via the NetWare server. Perform the following steps to set up. Step 1: Setting up the printer and the server(see page 79) Step 2: Setting up the client (for Windows 95 / Windows 98 / Windows Me)(see page 99) nStep 1: Setting up the printer and the server There are three ways of setup. •Using NDS (Novell Directory Service) - PSERVER mode(see page 80) •Using NDS - RPRINTER (NPRINTER) mode(see page 86) •Using Bindery - PSERVER mode(see page 93) You may need to consult with your network administrator which to select. For the detailed information of these modes, refer to the NetWare online manual. The setting of the NetWare server is almost performed on the client. You must login into the server using the supervisor privilege. Novell Client software must be installed in your computer prior to setting up. NOTE • You can also perform the NDPS printing. For the detailed information, see the home page of Novell. Setup in NetWare In NetWare 4.x / NetWare 5 Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup NDS Setup Setup OKYes Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup OKYes Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup... Downloaded From ManualsPrinter.com Manuals OK Setup Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals In NetWare 3.x Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.106 This chapter explains how to set up printing in various UNIX environments. Supported UNIX variants are as follows: • Solaris 2.6 • Solaris 2.3x – 2.5x • HP-UX 9.x and 10.x • AIX 4.xx • BSD UNIX There are two ways of printing. • Printing using LPD • Printing using FTP LPD (Line Printer Daemon) is a network printing protocol and programs associated with printer spooling service installed on TCP/IP systems. Perform the following steps to set up. Step1: Setting up TCP/IP for the printer Step 2: Adding the printer to UNIX systems Step 3: Setting up print queues nStep1: Setting up TCP/IP for the printer Refer to “Step 2: Setting up TCP/IP for the printer” on page 9 in “LPR Port printing using TCP/ IP in Windows 95 / Windows 98 / Windows Me”. nStep 2: Adding the printer to UNIX systems Perform the following steps to add the printer as a network printer to UNIX systems. When editing the hosts file, contact your network administrator. Setup in UNIX Printing using LPD Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Printing using FTP Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.115 If an IP address have been assigned to a printer, you can access the printer’s Web Server. It allows monitoring or setting the printer. 1Open the browser (Internet Explorer or Netscape). 2Enter a printer address in the Address box and press Return key. The Web Server screen is displayed. Ex. http://172.16.xxx.xxx/ 1Display the Web Server screen (see above). 2Click Network Setup in the left pane. The Enter Network Password window is displayed. 3Type root in the User name box and click . •If the password is already set, the password must be entered in the Password box. 4Click the menu item (TCP/IP, NetWare...) and change the setting. Using the Web Server Displaying the Web Server Screen Setting the Printer OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.119 Press PRINT/RESET button on the printer panel less than 5 seconds to print the configuration page. It enables to reset the printer’s network settings to the factory default settings. 1Display the Network Setup Tool. •To display the Network Setup Tool window, refer to “Step 1: Setting up TCP/IP on the computer” on page 8 or “Step 2: Setting up TCP/IP on the printer” on page 76 2Click the KX-P7110 printer you want to set up in the list. 3Click the Setup menu, then click Network Factory Default. Printing a Configuration Page Resetting the Printer Settings to Factory Default Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use AppleTalk Protocol ENABLE Enables or disables AppleTalk protocol. Printer Name KX-P7110-xxxxxx Sets AppleTalk printer name. The name you set here can be seen from Selector. Zone Name * Sets zone name to which KX-P7110 belongs. If blank, KX-P7110 will automatically belongs to the zone name where AppleTalk router is set. nameFactory DefaultDescription Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use NetBEUI Protocol ENABLE Enables or disables NetBEUI protocol. Computer Name KXPxxxxxx Sets Computer name. This name is shown as the computer in Windows Explorer. Workgroup KXP-Printer Sets the workgroup to which KX-P7110 belongs. Comment Panasonic KX-P7110This comment is shown as the computer in Windows Explorer. nameFactory DefaultDescription Authentic Community ****** Sets SNMP authentic community name. This community name is authenticated when receiving SNMP Set Request. Use Authentic Trap DISABLE Enables or disables authentic trap. TRAP Community public Enters TRAP community name. This name will be used when the printer executes a trap. TRAP Address 0.0.0.0 Enters the TRAP address. The TRAP address is disabled if the IP address is set 0.0.0.0. SysContact NULL Enters SysContact for MB-II object. Normally enter the administrator™s mail address. SysName NULL Enters SysName for MB-II object. Normally enter the host name or domain name. SysLocation NULL Enters SysLocation for MB-II object. Normally enter where the printer is located. Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription lp Port BOJ String NULL Sets the string that will be sent before sending a print job to the direct output port(lp). EOJ String NULL Sets the string that will be sent at the end of a print job to the direct output port(lp). enc/sjis Port BOJ String NULL Sets the string sent before sending the printing job to the output port via Kanji filter(sjis, euc). EOJ String \f Sets the string that will be sent at the end of the printing job to the output port via Kanji filter (sjis, euc). Printer Emulation ASCII Sets printer emulation (PDL). Changes to appropriate code when printing via Kanji filter (sjis, euc). Tab Size 8 char Sets the number of spaces that correspond to 1 tab. All tab codes will be converted to the spaces according to the number set here. This feature will not be available when this is set to 0 or when the job is directly sent to the printer. Page Width 0 char Sets the number of characters for the auto line feed feature of the Kanji filter. The auto line feed feature is not available when this is set to 0. Page Length 0 line Sets the number of lines for auto page feed feature of the Kanji filter between the number 0-255. The auto page feed feature is not available when this is set to 0. Downloaded From ManualsPrinter.com Manuals
Settings and Printing Network Network Maintenance and Spec. Setup in Windows Settings and Printing Network Network Maintenance and Spec.15 nStep 3: Installing LPR Port on the computer This step explains how to install LPR port monitor for KX-P7110 network printer port. Before installation, confirm that the printer is connected to the network correctly and is ready status. 1Insert the printer CD-ROM into the CD-ROM drive. The CD-ROM launches automatically. NOTE • If the CD-ROM does not launch automatically, perform the following steps (1) - (2). (1)Double click My computer icon. (2)Double click the CD-ROM icon. 2Click KX-P7110. 3Click Install Network Port. Downloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Finish Spool Settings... Start Downloaded From ManualsPrinter.com Manuals OK Spool Settings... Downloaded From ManualsPrinter.com Manuals Start File and Print Sharing... OK Downloaded From ManualsPrinter.com Manuals OK OK Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Windows 95 / Windows 98 / Windows Me 1Click , select Settings and then click Printers. 2Click your printer with the right mouse button. 3Click Properties. 4Click the Details tab. 5Click . The Add Port window is displayed. Browse... OK Next> Finish Start Add Port... Downloaded From ManualsPrinter.com Manuals Browse... OK OK OK Downloaded From ManualsPrinter.com Manuals Windows NT 4.0 / Windows 2000 1Click , select Settings and then click Printers. 2Click the printer with the right mouse button. 3Click Properties. 4Click the Por ts tab. 5Click . 6Click the Local Port for the printer port, and click . 7Enter the path of the printer connecting to the server according to the following form, then click . \\server name\printer name NOTE • You can confirm the server name and printer name as follows: (1) Double click the Network Neighborhood icon (for Windows NT 4.0) or My Network Places icon (for Windows 2000). (2) Double click the server connecting to the printer. 8Click . 9Click to close the printer properties window. Start Add Port... New Port... OK Close OK Downloaded From ManualsPrinter.com Manuals IPP Port Printing using TCP/IP in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port Printing using TCP/IP or IPX/SPX in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Downloaded From ManualsPrinter.com Manuals OK Setup Downloaded From ManualsPrinter.com Manuals OK Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Browse... OK Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... Browse... Downloaded From ManualsPrinter.com Manuals OK OK OKApply Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start OK Add... Downloaded From ManualsPrinter.com Manuals OK Continue Close Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> OK Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OK Start Downloaded From ManualsPrinter.com Manuals OK Separator Page... Browse... Open OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OKClose Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Standard TCP/IP Port printing in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Next> Next> Finish Close Close Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals IPP Port Printing Using TCP/IP in Windows 2000 Start Next> Downloaded From ManualsPrinter.com Manuals Next> Next> OK Have Disk... Browse... OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows 2000 Next> Finish Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.75 KX-P7110 Setup Utility uses TCP/IP. You need to set up AppleTalk and TCP/IP for your computer and printer. The printer does not work with AppleTalk Phase1. The following the outline of the steps how to set up in a Macintosh environment using the AppleTalk protocol. Step 1: Setting AppleTalk and TCP/IP on your computer Step 2: Setting up TCP/IP on the printer nStep 1: Setting AppleTalk and TCP/IP on your computer 1Select Control Panels from the Apple menu, then double click AppleTalk icon. 2Select Ethernet from the Connect via box. 3Close the dialog and click Save. 4Double click the TCP/IP icon in the Control Panels. Setup in Macintosh Downloaded From ManualsPrinter.com Manuals Continue Install Quit Downloaded From ManualsPrinter.com Manuals OK OK OK Downloaded From ManualsPrinter.com Manuals OK Setup OK OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.79 This chapter explains how to set to print from a client computer via the NetWare server. Perform the following steps to set up. Step 1: Setting up the printer and the server(see page 79) Step 2: Setting up the client (for Windows 95 / Windows 98 / Windows Me)(see page 99) nStep 1: Setting up the printer and the server There are three ways of setup. •Using NDS (Novell Directory Service) - PSERVER mode(see page 80) •Using NDS - RPRINTER (NPRINTER) mode(see page 86) •Using Bindery - PSERVER mode(see page 93) You may need to consult with your network administrator which to select. For the detailed information of these modes, refer to the NetWare online manual. The setting of the NetWare server is almost performed on the client. You must login into the server using the supervisor privilege. Novell Client software must be installed in your computer prior to setting up. NOTE • You can also perform the NDPS printing. For the detailed information, see the home page of Novell. Setup in NetWare In NetWare 4.x / NetWare 5 Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup NDS Setup Setup OKYes Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup OKYes Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup... Downloaded From ManualsPrinter.com Manuals OK Setup Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals In NetWare 3.x Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.106 This chapter explains how to set up printing in various UNIX environments. Supported UNIX variants are as follows: • Solaris 2.6 • Solaris 2.3x – 2.5x • HP-UX 9.x and 10.x • AIX 4.xx • BSD UNIX There are two ways of printing. • Printing using LPD • Printing using FTP LPD (Line Printer Daemon) is a network printing protocol and programs associated with printer spooling service installed on TCP/IP systems. Perform the following steps to set up. Step1: Setting up TCP/IP for the printer Step 2: Adding the printer to UNIX systems Step 3: Setting up print queues nStep1: Setting up TCP/IP for the printer Refer to “Step 2: Setting up TCP/IP for the printer” on page 9 in “LPR Port printing using TCP/ IP in Windows 95 / Windows 98 / Windows Me”. nStep 2: Adding the printer to UNIX systems Perform the following steps to add the printer as a network printer to UNIX systems. When editing the hosts file, contact your network administrator. Setup in UNIX Printing using LPD Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Printing using FTP Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.115 If an IP address have been assigned to a printer, you can access the printer’s Web Server. It allows monitoring or setting the printer. 1Open the browser (Internet Explorer or Netscape). 2Enter a printer address in the Address box and press Return key. The Web Server screen is displayed. Ex. http://172.16.xxx.xxx/ 1Display the Web Server screen (see above). 2Click Network Setup in the left pane. The Enter Network Password window is displayed. 3Type root in the User name box and click . •If the password is already set, the password must be entered in the Password box. 4Click the menu item (TCP/IP, NetWare...) and change the setting. Using the Web Server Displaying the Web Server Screen Setting the Printer OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.119 Press PRINT/RESET button on the printer panel less than 5 seconds to print the configuration page. It enables to reset the printer’s network settings to the factory default settings. 1Display the Network Setup Tool. •To display the Network Setup Tool window, refer to “Step 1: Setting up TCP/IP on the computer” on page 8 or “Step 2: Setting up TCP/IP on the printer” on page 76 2Click the KX-P7110 printer you want to set up in the list. 3Click the Setup menu, then click Network Factory Default. Printing a Configuration Page Resetting the Printer Settings to Factory Default Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use AppleTalk Protocol ENABLE Enables or disables AppleTalk protocol. Printer Name KX-P7110-xxxxxx Sets AppleTalk printer name. The name you set here can be seen from Selector. Zone Name * Sets zone name to which KX-P7110 belongs. If blank, KX-P7110 will automatically belongs to the zone name where AppleTalk router is set. nameFactory DefaultDescription Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use NetBEUI Protocol ENABLE Enables or disables NetBEUI protocol. Computer Name KXPxxxxxx Sets Computer name. This name is shown as the computer in Windows Explorer. Workgroup KXP-Printer Sets the workgroup to which KX-P7110 belongs. Comment Panasonic KX-P7110This comment is shown as the computer in Windows Explorer. nameFactory DefaultDescription Authentic Community ****** Sets SNMP authentic community name. This community name is authenticated when receiving SNMP Set Request. Use Authentic Trap DISABLE Enables or disables authentic trap. TRAP Community public Enters TRAP community name. This name will be used when the printer executes a trap. TRAP Address 0.0.0.0 Enters the TRAP address. The TRAP address is disabled if the IP address is set 0.0.0.0. SysContact NULL Enters SysContact for MB-II object. Normally enter the administrator™s mail address. SysName NULL Enters SysName for MB-II object. Normally enter the host name or domain name. SysLocation NULL Enters SysLocation for MB-II object. Normally enter where the printer is located. Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription lp Port BOJ String NULL Sets the string that will be sent before sending a print job to the direct output port(lp). EOJ String NULL Sets the string that will be sent at the end of a print job to the direct output port(lp). enc/sjis Port BOJ String NULL Sets the string sent before sending the printing job to the output port via Kanji filter(sjis, euc). EOJ String \f Sets the string that will be sent at the end of the printing job to the output port via Kanji filter (sjis, euc). Printer Emulation ASCII Sets printer emulation (PDL). Changes to appropriate code when printing via Kanji filter (sjis, euc). Tab Size 8 char Sets the number of spaces that correspond to 1 tab. All tab codes will be converted to the spaces according to the number set here. This feature will not be available when this is set to 0 or when the job is directly sent to the printer. Page Width 0 char Sets the number of characters for the auto line feed feature of the Kanji filter. The auto line feed feature is not available when this is set to 0. Page Length 0 line Sets the number of lines for auto page feed feature of the Kanji filter between the number 0-255. The auto page feed feature is not available when this is set to 0. Downloaded From ManualsPrinter.com Manuals
Settings and Printing Network Network Maintenance and Spec. Setup in Windows Settings and Printing Network Network Maintenance and Spec.15 nStep 3: Installing LPR Port on the computer This step explains how to install LPR port monitor for KX-P7110 network printer port. Before installation, confirm that the printer is connected to the network correctly and is ready status. 1Insert the printer CD-ROM into the CD-ROM drive. The CD-ROM launches automatically. NOTE • If the CD-ROM does not launch automatically, perform the following steps (1) - (2). (1)Double click My computer icon. (2)Double click the CD-ROM icon. 2Click KX-P7110. 3Click Install Network Port. Downloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Finish Spool Settings... Start Downloaded From ManualsPrinter.com Manuals OK Spool Settings... Downloaded From ManualsPrinter.com Manuals Start File and Print Sharing... OK Downloaded From ManualsPrinter.com Manuals OK OK Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Windows 95 / Windows 98 / Windows Me 1Click , select Settings and then click Printers. 2Click your printer with the right mouse button. 3Click Properties. 4Click the Details tab. 5Click . The Add Port window is displayed. Browse... OK Next> Finish Start Add Port... Downloaded From ManualsPrinter.com Manuals Browse... OK OK OK Downloaded From ManualsPrinter.com Manuals Windows NT 4.0 / Windows 2000 1Click , select Settings and then click Printers. 2Click the printer with the right mouse button. 3Click Properties. 4Click the Por ts tab. 5Click . 6Click the Local Port for the printer port, and click . 7Enter the path of the printer connecting to the server according to the following form, then click . \\server name\printer name NOTE • You can confirm the server name and printer name as follows: (1) Double click the Network Neighborhood icon (for Windows NT 4.0) or My Network Places icon (for Windows 2000). (2) Double click the server connecting to the printer. 8Click . 9Click to close the printer properties window. Start Add Port... New Port... OK Close OK Downloaded From ManualsPrinter.com Manuals IPP Port Printing using TCP/IP in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port Printing using TCP/IP or IPX/SPX in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Downloaded From ManualsPrinter.com Manuals OK Setup Downloaded From ManualsPrinter.com Manuals OK Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Browse... OK Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... Browse... Downloaded From ManualsPrinter.com Manuals OK OK OKApply Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start OK Add... Downloaded From ManualsPrinter.com Manuals OK Continue Close Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> OK Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OK Start Downloaded From ManualsPrinter.com Manuals OK Separator Page... Browse... Open OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OKClose Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Standard TCP/IP Port printing in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Next> Next> Finish Close Close Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals IPP Port Printing Using TCP/IP in Windows 2000 Start Next> Downloaded From ManualsPrinter.com Manuals Next> Next> OK Have Disk... Browse... OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows 2000 Next> Finish Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.75 KX-P7110 Setup Utility uses TCP/IP. You need to set up AppleTalk and TCP/IP for your computer and printer. The printer does not work with AppleTalk Phase1. The following the outline of the steps how to set up in a Macintosh environment using the AppleTalk protocol. Step 1: Setting AppleTalk and TCP/IP on your computer Step 2: Setting up TCP/IP on the printer nStep 1: Setting AppleTalk and TCP/IP on your computer 1Select Control Panels from the Apple menu, then double click AppleTalk icon. 2Select Ethernet from the Connect via box. 3Close the dialog and click Save. 4Double click the TCP/IP icon in the Control Panels. Setup in Macintosh Downloaded From ManualsPrinter.com Manuals Continue Install Quit Downloaded From ManualsPrinter.com Manuals OK OK OK Downloaded From ManualsPrinter.com Manuals OK Setup OK OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.79 This chapter explains how to set to print from a client computer via the NetWare server. Perform the following steps to set up. Step 1: Setting up the printer and the server(see page 79) Step 2: Setting up the client (for Windows 95 / Windows 98 / Windows Me)(see page 99) nStep 1: Setting up the printer and the server There are three ways of setup. •Using NDS (Novell Directory Service) - PSERVER mode(see page 80) •Using NDS - RPRINTER (NPRINTER) mode(see page 86) •Using Bindery - PSERVER mode(see page 93) You may need to consult with your network administrator which to select. For the detailed information of these modes, refer to the NetWare online manual. The setting of the NetWare server is almost performed on the client. You must login into the server using the supervisor privilege. Novell Client software must be installed in your computer prior to setting up. NOTE • You can also perform the NDPS printing. For the detailed information, see the home page of Novell. Setup in NetWare In NetWare 4.x / NetWare 5 Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup NDS Setup Setup OKYes Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup OKYes Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup... Downloaded From ManualsPrinter.com Manuals OK Setup Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals In NetWare 3.x Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.106 This chapter explains how to set up printing in various UNIX environments. Supported UNIX variants are as follows: • Solaris 2.6 • Solaris 2.3x – 2.5x • HP-UX 9.x and 10.x • AIX 4.xx • BSD UNIX There are two ways of printing. • Printing using LPD • Printing using FTP LPD (Line Printer Daemon) is a network printing protocol and programs associated with printer spooling service installed on TCP/IP systems. Perform the following steps to set up. Step1: Setting up TCP/IP for the printer Step 2: Adding the printer to UNIX systems Step 3: Setting up print queues nStep1: Setting up TCP/IP for the printer Refer to “Step 2: Setting up TCP/IP for the printer” on page 9 in “LPR Port printing using TCP/ IP in Windows 95 / Windows 98 / Windows Me”. nStep 2: Adding the printer to UNIX systems Perform the following steps to add the printer as a network printer to UNIX systems. When editing the hosts file, contact your network administrator. Setup in UNIX Printing using LPD Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Printing using FTP Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.115 If an IP address have been assigned to a printer, you can access the printer’s Web Server. It allows monitoring or setting the printer. 1Open the browser (Internet Explorer or Netscape). 2Enter a printer address in the Address box and press Return key. The Web Server screen is displayed. Ex. http://172.16.xxx.xxx/ 1Display the Web Server screen (see above). 2Click Network Setup in the left pane. The Enter Network Password window is displayed. 3Type root in the User name box and click . •If the password is already set, the password must be entered in the Password box. 4Click the menu item (TCP/IP, NetWare...) and change the setting. Using the Web Server Displaying the Web Server Screen Setting the Printer OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.119 Press PRINT/RESET button on the printer panel less than 5 seconds to print the configuration page. It enables to reset the printer’s network settings to the factory default settings. 1Display the Network Setup Tool. •To display the Network Setup Tool window, refer to “Step 1: Setting up TCP/IP on the computer” on page 8 or “Step 2: Setting up TCP/IP on the printer” on page 76 2Click the KX-P7110 printer you want to set up in the list. 3Click the Setup menu, then click Network Factory Default. Printing a Configuration Page Resetting the Printer Settings to Factory Default Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use AppleTalk Protocol ENABLE Enables or disables AppleTalk protocol. Printer Name KX-P7110-xxxxxx Sets AppleTalk printer name. The name you set here can be seen from Selector. Zone Name * Sets zone name to which KX-P7110 belongs. If blank, KX-P7110 will automatically belongs to the zone name where AppleTalk router is set. nameFactory DefaultDescription Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use NetBEUI Protocol ENABLE Enables or disables NetBEUI protocol. Computer Name KXPxxxxxx Sets Computer name. This name is shown as the computer in Windows Explorer. Workgroup KXP-Printer Sets the workgroup to which KX-P7110 belongs. Comment Panasonic KX-P7110This comment is shown as the computer in Windows Explorer. nameFactory DefaultDescription Authentic Community ****** Sets SNMP authentic community name. This community name is authenticated when receiving SNMP Set Request. Use Authentic Trap DISABLE Enables or disables authentic trap. TRAP Community public Enters TRAP community name. This name will be used when the printer executes a trap. TRAP Address 0.0.0.0 Enters the TRAP address. The TRAP address is disabled if the IP address is set 0.0.0.0. SysContact NULL Enters SysContact for MB-II object. Normally enter the administrator™s mail address. SysName NULL Enters SysName for MB-II object. Normally enter the host name or domain name. SysLocation NULL Enters SysLocation for MB-II object. Normally enter where the printer is located. Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription lp Port BOJ String NULL Sets the string that will be sent before sending a print job to the direct output port(lp). EOJ String NULL Sets the string that will be sent at the end of a print job to the direct output port(lp). enc/sjis Port BOJ String NULL Sets the string sent before sending the printing job to the output port via Kanji filter(sjis, euc). EOJ String \f Sets the string that will be sent at the end of the printing job to the output port via Kanji filter (sjis, euc). Printer Emulation ASCII Sets printer emulation (PDL). Changes to appropriate code when printing via Kanji filter (sjis, euc). Tab Size 8 char Sets the number of spaces that correspond to 1 tab. All tab codes will be converted to the spaces according to the number set here. This feature will not be available when this is set to 0 or when the job is directly sent to the printer. Page Width 0 char Sets the number of characters for the auto line feed feature of the Kanji filter. The auto line feed feature is not available when this is set to 0. Page Length 0 line Sets the number of lines for auto page feed feature of the Kanji filter between the number 0-255. The auto page feed feature is not available when this is set to 0. Downloaded From ManualsPrinter.com Manuals
Settings and Printing Network Network Maintenance and Spec. Setup in Windows Settings and Printing Network Network Maintenance and Spec.15 nStep 3: Installing LPR Port on the computer This step explains how to install LPR port monitor for KX-P7110 network printer port. Before installation, confirm that the printer is connected to the network correctly and is ready status. 1Insert the printer CD-ROM into the CD-ROM drive. The CD-ROM launches automatically. NOTE • If the CD-ROM does not launch automatically, perform the following steps (1) - (2). (1)Double click My computer icon. (2)Double click the CD-ROM icon. 2Click KX-P7110. 3Click Install Network Port. Downloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Finish Spool Settings... Start Downloaded From ManualsPrinter.com Manuals OK Spool Settings... Downloaded From ManualsPrinter.com Manuals Start File and Print Sharing... OK Downloaded From ManualsPrinter.com Manuals OK OK Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Windows 95 / Windows 98 / Windows Me 1Click , select Settings and then click Printers. 2Click your printer with the right mouse button. 3Click Properties. 4Click the Details tab. 5Click . The Add Port window is displayed. Browse... OK Next> Finish Start Add Port... Downloaded From ManualsPrinter.com Manuals Browse... OK OK OK Downloaded From ManualsPrinter.com Manuals Windows NT 4.0 / Windows 2000 1Click , select Settings and then click Printers. 2Click the printer with the right mouse button. 3Click Properties. 4Click the Por ts tab. 5Click . 6Click the Local Port for the printer port, and click . 7Enter the path of the printer connecting to the server according to the following form, then click . \\server name\printer name NOTE • You can confirm the server name and printer name as follows: (1) Double click the Network Neighborhood icon (for Windows NT 4.0) or My Network Places icon (for Windows 2000). (2) Double click the server connecting to the printer. 8Click . 9Click to close the printer properties window. Start Add Port... New Port... OK Close OK Downloaded From ManualsPrinter.com Manuals IPP Port Printing using TCP/IP in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port Printing using TCP/IP or IPX/SPX in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Downloaded From ManualsPrinter.com Manuals OK Setup Downloaded From ManualsPrinter.com Manuals OK Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Browse... OK Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... Browse... Downloaded From ManualsPrinter.com Manuals OK OK OKApply Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start OK Add... Downloaded From ManualsPrinter.com Manuals OK Continue Close Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> OK Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OK Start Downloaded From ManualsPrinter.com Manuals OK Separator Page... Browse... Open OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OKClose Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Standard TCP/IP Port printing in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Next> Next> Finish Close Close Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals IPP Port Printing Using TCP/IP in Windows 2000 Start Next> Downloaded From ManualsPrinter.com Manuals Next> Next> OK Have Disk... Browse... OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows 2000 Next> Finish Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.75 KX-P7110 Setup Utility uses TCP/IP. You need to set up AppleTalk and TCP/IP for your computer and printer. The printer does not work with AppleTalk Phase1. The following the outline of the steps how to set up in a Macintosh environment using the AppleTalk protocol. Step 1: Setting AppleTalk and TCP/IP on your computer Step 2: Setting up TCP/IP on the printer nStep 1: Setting AppleTalk and TCP/IP on your computer 1Select Control Panels from the Apple menu, then double click AppleTalk icon. 2Select Ethernet from the Connect via box. 3Close the dialog and click Save. 4Double click the TCP/IP icon in the Control Panels. Setup in Macintosh Downloaded From ManualsPrinter.com Manuals Continue Install Quit Downloaded From ManualsPrinter.com Manuals OK OK OK Downloaded From ManualsPrinter.com Manuals OK Setup OK OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.79 This chapter explains how to set to print from a client computer via the NetWare server. Perform the following steps to set up. Step 1: Setting up the printer and the server(see page 79) Step 2: Setting up the client (for Windows 95 / Windows 98 / Windows Me)(see page 99) nStep 1: Setting up the printer and the server There are three ways of setup. •Using NDS (Novell Directory Service) - PSERVER mode(see page 80) •Using NDS - RPRINTER (NPRINTER) mode(see page 86) •Using Bindery - PSERVER mode(see page 93) You may need to consult with your network administrator which to select. For the detailed information of these modes, refer to the NetWare online manual. The setting of the NetWare server is almost performed on the client. You must login into the server using the supervisor privilege. Novell Client software must be installed in your computer prior to setting up. NOTE • You can also perform the NDPS printing. For the detailed information, see the home page of Novell. Setup in NetWare In NetWare 4.x / NetWare 5 Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup NDS Setup Setup OKYes Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup OKYes Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup... Downloaded From ManualsPrinter.com Manuals OK Setup Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals In NetWare 3.x Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.106 This chapter explains how to set up printing in various UNIX environments. Supported UNIX variants are as follows: • Solaris 2.6 • Solaris 2.3x – 2.5x • HP-UX 9.x and 10.x • AIX 4.xx • BSD UNIX There are two ways of printing. • Printing using LPD • Printing using FTP LPD (Line Printer Daemon) is a network printing protocol and programs associated with printer spooling service installed on TCP/IP systems. Perform the following steps to set up. Step1: Setting up TCP/IP for the printer Step 2: Adding the printer to UNIX systems Step 3: Setting up print queues nStep1: Setting up TCP/IP for the printer Refer to “Step 2: Setting up TCP/IP for the printer” on page 9 in “LPR Port printing using TCP/ IP in Windows 95 / Windows 98 / Windows Me”. nStep 2: Adding the printer to UNIX systems Perform the following steps to add the printer as a network printer to UNIX systems. When editing the hosts file, contact your network administrator. Setup in UNIX Printing using LPD Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Printing using FTP Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.115 If an IP address have been assigned to a printer, you can access the printer’s Web Server. It allows monitoring or setting the printer. 1Open the browser (Internet Explorer or Netscape). 2Enter a printer address in the Address box and press Return key. The Web Server screen is displayed. Ex. http://172.16.xxx.xxx/ 1Display the Web Server screen (see above). 2Click Network Setup in the left pane. The Enter Network Password window is displayed. 3Type root in the User name box and click . •If the password is already set, the password must be entered in the Password box. 4Click the menu item (TCP/IP, NetWare...) and change the setting. Using the Web Server Displaying the Web Server Screen Setting the Printer OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.119 Press PRINT/RESET button on the printer panel less than 5 seconds to print the configuration page. It enables to reset the printer’s network settings to the factory default settings. 1Display the Network Setup Tool. •To display the Network Setup Tool window, refer to “Step 1: Setting up TCP/IP on the computer” on page 8 or “Step 2: Setting up TCP/IP on the printer” on page 76 2Click the KX-P7110 printer you want to set up in the list. 3Click the Setup menu, then click Network Factory Default. Printing a Configuration Page Resetting the Printer Settings to Factory Default Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use AppleTalk Protocol ENABLE Enables or disables AppleTalk protocol. Printer Name KX-P7110-xxxxxx Sets AppleTalk printer name. The name you set here can be seen from Selector. Zone Name * Sets zone name to which KX-P7110 belongs. If blank, KX-P7110 will automatically belongs to the zone name where AppleTalk router is set. nameFactory DefaultDescription Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use NetBEUI Protocol ENABLE Enables or disables NetBEUI protocol. Computer Name KXPxxxxxx Sets Computer name. This name is shown as the computer in Windows Explorer. Workgroup KXP-Printer Sets the workgroup to which KX-P7110 belongs. Comment Panasonic KX-P7110This comment is shown as the computer in Windows Explorer. nameFactory DefaultDescription Authentic Community ****** Sets SNMP authentic community name. This community name is authenticated when receiving SNMP Set Request. Use Authentic Trap DISABLE Enables or disables authentic trap. TRAP Community public Enters TRAP community name. This name will be used when the printer executes a trap. TRAP Address 0.0.0.0 Enters the TRAP address. The TRAP address is disabled if the IP address is set 0.0.0.0. SysContact NULL Enters SysContact for MB-II object. Normally enter the administrator™s mail address. SysName NULL Enters SysName for MB-II object. Normally enter the host name or domain name. SysLocation NULL Enters SysLocation for MB-II object. Normally enter where the printer is located. Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription lp Port BOJ String NULL Sets the string that will be sent before sending a print job to the direct output port(lp). EOJ String NULL Sets the string that will be sent at the end of a print job to the direct output port(lp). enc/sjis Port BOJ String NULL Sets the string sent before sending the printing job to the output port via Kanji filter(sjis, euc). EOJ String \f Sets the string that will be sent at the end of the printing job to the output port via Kanji filter (sjis, euc). Printer Emulation ASCII Sets printer emulation (PDL). Changes to appropriate code when printing via Kanji filter (sjis, euc). Tab Size 8 char Sets the number of spaces that correspond to 1 tab. All tab codes will be converted to the spaces according to the number set here. This feature will not be available when this is set to 0 or when the job is directly sent to the printer. Page Width 0 char Sets the number of characters for the auto line feed feature of the Kanji filter. The auto line feed feature is not available when this is set to 0. Page Length 0 line Sets the number of lines for auto page feed feature of the Kanji filter between the number 0-255. The auto page feed feature is not available when this is set to 0. Downloaded From ManualsPrinter.com Manuals
Settings and Printing Network Network Maintenance and Spec. Setup in Windows Settings and Printing Network Network Maintenance and Spec.15 nStep 3: Installing LPR Port on the computer This step explains how to install LPR port monitor for KX-P7110 network printer port. Before installation, confirm that the printer is connected to the network correctly and is ready status. 1Insert the printer CD-ROM into the CD-ROM drive. The CD-ROM launches automatically. NOTE • If the CD-ROM does not launch automatically, perform the following steps (1) - (2). (1)Double click My computer icon. (2)Double click the CD-ROM icon. 2Click KX-P7110. 3Click Install Network Port. Downloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Finish Spool Settings... Start Downloaded From ManualsPrinter.com Manuals OK Spool Settings... Downloaded From ManualsPrinter.com Manuals Start File and Print Sharing... OK Downloaded From ManualsPrinter.com Manuals OK OK Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Windows 95 / Windows 98 / Windows Me 1Click , select Settings and then click Printers. 2Click your printer with the right mouse button. 3Click Properties. 4Click the Details tab. 5Click . The Add Port window is displayed. Browse... OK Next> Finish Start Add Port... Downloaded From ManualsPrinter.com Manuals Browse... OK OK OK Downloaded From ManualsPrinter.com Manuals Windows NT 4.0 / Windows 2000 1Click , select Settings and then click Printers. 2Click the printer with the right mouse button. 3Click Properties. 4Click the Por ts tab. 5Click . 6Click the Local Port for the printer port, and click . 7Enter the path of the printer connecting to the server according to the following form, then click . \\server name\printer name NOTE • You can confirm the server name and printer name as follows: (1) Double click the Network Neighborhood icon (for Windows NT 4.0) or My Network Places icon (for Windows 2000). (2) Double click the server connecting to the printer. 8Click . 9Click to close the printer properties window. Start Add Port... New Port... OK Close OK Downloaded From ManualsPrinter.com Manuals IPP Port Printing using TCP/IP in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port Printing using TCP/IP or IPX/SPX in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Downloaded From ManualsPrinter.com Manuals OK Setup Downloaded From ManualsPrinter.com Manuals OK Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Browse... OK Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... Browse... Downloaded From ManualsPrinter.com Manuals OK OK OKApply Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start OK Add... Downloaded From ManualsPrinter.com Manuals OK Continue Close Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> OK Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OK Start Downloaded From ManualsPrinter.com Manuals OK Separator Page... Browse... Open OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OKClose Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Standard TCP/IP Port printing in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Next> Next> Finish Close Close Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals IPP Port Printing Using TCP/IP in Windows 2000 Start Next> Downloaded From ManualsPrinter.com Manuals Next> Next> OK Have Disk... Browse... OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows 2000 Next> Finish Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.75 KX-P7110 Setup Utility uses TCP/IP. You need to set up AppleTalk and TCP/IP for your computer and printer. The printer does not work with AppleTalk Phase1. The following the outline of the steps how to set up in a Macintosh environment using the AppleTalk protocol. Step 1: Setting AppleTalk and TCP/IP on your computer Step 2: Setting up TCP/IP on the printer nStep 1: Setting AppleTalk and TCP/IP on your computer 1Select Control Panels from the Apple menu, then double click AppleTalk icon. 2Select Ethernet from the Connect via box. 3Close the dialog and click Save. 4Double click the TCP/IP icon in the Control Panels. Setup in Macintosh Downloaded From ManualsPrinter.com Manuals Continue Install Quit Downloaded From ManualsPrinter.com Manuals OK OK OK Downloaded From ManualsPrinter.com Manuals OK Setup OK OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.79 This chapter explains how to set to print from a client computer via the NetWare server. Perform the following steps to set up. Step 1: Setting up the printer and the server(see page 79) Step 2: Setting up the client (for Windows 95 / Windows 98 / Windows Me)(see page 99) nStep 1: Setting up the printer and the server There are three ways of setup. •Using NDS (Novell Directory Service) - PSERVER mode(see page 80) •Using NDS - RPRINTER (NPRINTER) mode(see page 86) •Using Bindery - PSERVER mode(see page 93) You may need to consult with your network administrator which to select. For the detailed information of these modes, refer to the NetWare online manual. The setting of the NetWare server is almost performed on the client. You must login into the server using the supervisor privilege. Novell Client software must be installed in your computer prior to setting up. NOTE • You can also perform the NDPS printing. For the detailed information, see the home page of Novell. Setup in NetWare In NetWare 4.x / NetWare 5 Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup NDS Setup Setup OKYes Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup OKYes Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup... Downloaded From ManualsPrinter.com Manuals OK Setup Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals In NetWare 3.x Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.106 This chapter explains how to set up printing in various UNIX environments. Supported UNIX variants are as follows: • Solaris 2.6 • Solaris 2.3x – 2.5x • HP-UX 9.x and 10.x • AIX 4.xx • BSD UNIX There are two ways of printing. • Printing using LPD • Printing using FTP LPD (Line Printer Daemon) is a network printing protocol and programs associated with printer spooling service installed on TCP/IP systems. Perform the following steps to set up. Step1: Setting up TCP/IP for the printer Step 2: Adding the printer to UNIX systems Step 3: Setting up print queues nStep1: Setting up TCP/IP for the printer Refer to “Step 2: Setting up TCP/IP for the printer” on page 9 in “LPR Port printing using TCP/ IP in Windows 95 / Windows 98 / Windows Me”. nStep 2: Adding the printer to UNIX systems Perform the following steps to add the printer as a network printer to UNIX systems. When editing the hosts file, contact your network administrator. Setup in UNIX Printing using LPD Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Printing using FTP Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.115 If an IP address have been assigned to a printer, you can access the printer’s Web Server. It allows monitoring or setting the printer. 1Open the browser (Internet Explorer or Netscape). 2Enter a printer address in the Address box and press Return key. The Web Server screen is displayed. Ex. http://172.16.xxx.xxx/ 1Display the Web Server screen (see above). 2Click Network Setup in the left pane. The Enter Network Password window is displayed. 3Type root in the User name box and click . •If the password is already set, the password must be entered in the Password box. 4Click the menu item (TCP/IP, NetWare...) and change the setting. Using the Web Server Displaying the Web Server Screen Setting the Printer OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.119 Press PRINT/RESET button on the printer panel less than 5 seconds to print the configuration page. It enables to reset the printer’s network settings to the factory default settings. 1Display the Network Setup Tool. •To display the Network Setup Tool window, refer to “Step 1: Setting up TCP/IP on the computer” on page 8 or “Step 2: Setting up TCP/IP on the printer” on page 76 2Click the KX-P7110 printer you want to set up in the list. 3Click the Setup menu, then click Network Factory Default. Printing a Configuration Page Resetting the Printer Settings to Factory Default Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use AppleTalk Protocol ENABLE Enables or disables AppleTalk protocol. Printer Name KX-P7110-xxxxxx Sets AppleTalk printer name. The name you set here can be seen from Selector. Zone Name * Sets zone name to which KX-P7110 belongs. If blank, KX-P7110 will automatically belongs to the zone name where AppleTalk router is set. nameFactory DefaultDescription Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use NetBEUI Protocol ENABLE Enables or disables NetBEUI protocol. Computer Name KXPxxxxxx Sets Computer name. This name is shown as the computer in Windows Explorer. Workgroup KXP-Printer Sets the workgroup to which KX-P7110 belongs. Comment Panasonic KX-P7110This comment is shown as the computer in Windows Explorer. nameFactory DefaultDescription Authentic Community ****** Sets SNMP authentic community name. This community name is authenticated when receiving SNMP Set Request. Use Authentic Trap DISABLE Enables or disables authentic trap. TRAP Community public Enters TRAP community name. This name will be used when the printer executes a trap. TRAP Address 0.0.0.0 Enters the TRAP address. The TRAP address is disabled if the IP address is set 0.0.0.0. SysContact NULL Enters SysContact for MB-II object. Normally enter the administrator™s mail address. SysName NULL Enters SysName for MB-II object. Normally enter the host name or domain name. SysLocation NULL Enters SysLocation for MB-II object. Normally enter where the printer is located. Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription lp Port BOJ String NULL Sets the string that will be sent before sending a print job to the direct output port(lp). EOJ String NULL Sets the string that will be sent at the end of a print job to the direct output port(lp). enc/sjis Port BOJ String NULL Sets the string sent before sending the printing job to the output port via Kanji filter(sjis, euc). EOJ String \f Sets the string that will be sent at the end of the printing job to the output port via Kanji filter (sjis, euc). Printer Emulation ASCII Sets printer emulation (PDL). Changes to appropriate code when printing via Kanji filter (sjis, euc). Tab Size 8 char Sets the number of spaces that correspond to 1 tab. All tab codes will be converted to the spaces according to the number set here. This feature will not be available when this is set to 0 or when the job is directly sent to the printer. Page Width 0 char Sets the number of characters for the auto line feed feature of the Kanji filter. The auto line feed feature is not available when this is set to 0. Page Length 0 line Sets the number of lines for auto page feed feature of the Kanji filter between the number 0-255. The auto page feed feature is not available when this is set to 0. Downloaded From ManualsPrinter.com Manuals
Settings and Printing Network Network Maintenance and Spec. Setup in Windows Settings and Printing Network Network Maintenance and Spec.15 nStep 3: Installing LPR Port on the computer This step explains how to install LPR port monitor for KX-P7110 network printer port. Before installation, confirm that the printer is connected to the network correctly and is ready status. 1Insert the printer CD-ROM into the CD-ROM drive. The CD-ROM launches automatically. NOTE • If the CD-ROM does not launch automatically, perform the following steps (1) - (2). (1)Double click My computer icon. (2)Double click the CD-ROM icon. 2Click KX-P7110. 3Click Install Network Port. Downloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Finish Spool Settings... Start Downloaded From ManualsPrinter.com Manuals OK Spool Settings... Downloaded From ManualsPrinter.com Manuals Start File and Print Sharing... OK Downloaded From ManualsPrinter.com Manuals OK OK Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Windows 95 / Windows 98 / Windows Me 1Click , select Settings and then click Printers. 2Click your printer with the right mouse button. 3Click Properties. 4Click the Details tab. 5Click . The Add Port window is displayed. Browse... OK Next> Finish Start Add Port... Downloaded From ManualsPrinter.com Manuals Browse... OK OK OK Downloaded From ManualsPrinter.com Manuals Windows NT 4.0 / Windows 2000 1Click , select Settings and then click Printers. 2Click the printer with the right mouse button. 3Click Properties. 4Click the Por ts tab. 5Click . 6Click the Local Port for the printer port, and click . 7Enter the path of the printer connecting to the server according to the following form, then click . \\server name\printer name NOTE • You can confirm the server name and printer name as follows: (1) Double click the Network Neighborhood icon (for Windows NT 4.0) or My Network Places icon (for Windows 2000). (2) Double click the server connecting to the printer. 8Click . 9Click to close the printer properties window. Start Add Port... New Port... OK Close OK Downloaded From ManualsPrinter.com Manuals IPP Port Printing using TCP/IP in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port Printing using TCP/IP or IPX/SPX in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Downloaded From ManualsPrinter.com Manuals OK Setup Downloaded From ManualsPrinter.com Manuals OK Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Browse... OK Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... Browse... Downloaded From ManualsPrinter.com Manuals OK OK OKApply Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start OK Add... Downloaded From ManualsPrinter.com Manuals OK Continue Close Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> OK Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OK Start Downloaded From ManualsPrinter.com Manuals OK Separator Page... Browse... Open OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OKClose Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Standard TCP/IP Port printing in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Next> Next> Finish Close Close Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals IPP Port Printing Using TCP/IP in Windows 2000 Start Next> Downloaded From ManualsPrinter.com Manuals Next> Next> OK Have Disk... Browse... OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows 2000 Next> Finish Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.75 KX-P7110 Setup Utility uses TCP/IP. You need to set up AppleTalk and TCP/IP for your computer and printer. The printer does not work with AppleTalk Phase1. The following the outline of the steps how to set up in a Macintosh environment using the AppleTalk protocol. Step 1: Setting AppleTalk and TCP/IP on your computer Step 2: Setting up TCP/IP on the printer nStep 1: Setting AppleTalk and TCP/IP on your computer 1Select Control Panels from the Apple menu, then double click AppleTalk icon. 2Select Ethernet from the Connect via box. 3Close the dialog and click Save. 4Double click the TCP/IP icon in the Control Panels. Setup in Macintosh Downloaded From ManualsPrinter.com Manuals Continue Install Quit Downloaded From ManualsPrinter.com Manuals OK OK OK Downloaded From ManualsPrinter.com Manuals OK Setup OK OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.79 This chapter explains how to set to print from a client computer via the NetWare server. Perform the following steps to set up. Step 1: Setting up the printer and the server(see page 79) Step 2: Setting up the client (for Windows 95 / Windows 98 / Windows Me)(see page 99) nStep 1: Setting up the printer and the server There are three ways of setup. •Using NDS (Novell Directory Service) - PSERVER mode(see page 80) •Using NDS - RPRINTER (NPRINTER) mode(see page 86) •Using Bindery - PSERVER mode(see page 93) You may need to consult with your network administrator which to select. For the detailed information of these modes, refer to the NetWare online manual. The setting of the NetWare server is almost performed on the client. You must login into the server using the supervisor privilege. Novell Client software must be installed in your computer prior to setting up. NOTE • You can also perform the NDPS printing. For the detailed information, see the home page of Novell. Setup in NetWare In NetWare 4.x / NetWare 5 Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup NDS Setup Setup OKYes Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup OKYes Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup... Downloaded From ManualsPrinter.com Manuals OK Setup Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals In NetWare 3.x Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.106 This chapter explains how to set up printing in various UNIX environments. Supported UNIX variants are as follows: • Solaris 2.6 • Solaris 2.3x – 2.5x • HP-UX 9.x and 10.x • AIX 4.xx • BSD UNIX There are two ways of printing. • Printing using LPD • Printing using FTP LPD (Line Printer Daemon) is a network printing protocol and programs associated with printer spooling service installed on TCP/IP systems. Perform the following steps to set up. Step1: Setting up TCP/IP for the printer Step 2: Adding the printer to UNIX systems Step 3: Setting up print queues nStep1: Setting up TCP/IP for the printer Refer to “Step 2: Setting up TCP/IP for the printer” on page 9 in “LPR Port printing using TCP/ IP in Windows 95 / Windows 98 / Windows Me”. nStep 2: Adding the printer to UNIX systems Perform the following steps to add the printer as a network printer to UNIX systems. When editing the hosts file, contact your network administrator. Setup in UNIX Printing using LPD Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Printing using FTP Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.115 If an IP address have been assigned to a printer, you can access the printer’s Web Server. It allows monitoring or setting the printer. 1Open the browser (Internet Explorer or Netscape). 2Enter a printer address in the Address box and press Return key. The Web Server screen is displayed. Ex. http://172.16.xxx.xxx/ 1Display the Web Server screen (see above). 2Click Network Setup in the left pane. The Enter Network Password window is displayed. 3Type root in the User name box and click . •If the password is already set, the password must be entered in the Password box. 4Click the menu item (TCP/IP, NetWare...) and change the setting. Using the Web Server Displaying the Web Server Screen Setting the Printer OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.119 Press PRINT/RESET button on the printer panel less than 5 seconds to print the configuration page. It enables to reset the printer’s network settings to the factory default settings. 1Display the Network Setup Tool. •To display the Network Setup Tool window, refer to “Step 1: Setting up TCP/IP on the computer” on page 8 or “Step 2: Setting up TCP/IP on the printer” on page 76 2Click the KX-P7110 printer you want to set up in the list. 3Click the Setup menu, then click Network Factory Default. Printing a Configuration Page Resetting the Printer Settings to Factory Default Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use AppleTalk Protocol ENABLE Enables or disables AppleTalk protocol. Printer Name KX-P7110-xxxxxx Sets AppleTalk printer name. The name you set here can be seen from Selector. Zone Name * Sets zone name to which KX-P7110 belongs. If blank, KX-P7110 will automatically belongs to the zone name where AppleTalk router is set. nameFactory DefaultDescription Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use NetBEUI Protocol ENABLE Enables or disables NetBEUI protocol. Computer Name KXPxxxxxx Sets Computer name. This name is shown as the computer in Windows Explorer. Workgroup KXP-Printer Sets the workgroup to which KX-P7110 belongs. Comment Panasonic KX-P7110This comment is shown as the computer in Windows Explorer. nameFactory DefaultDescription Authentic Community ****** Sets SNMP authentic community name. This community name is authenticated when receiving SNMP Set Request. Use Authentic Trap DISABLE Enables or disables authentic trap. TRAP Community public Enters TRAP community name. This name will be used when the printer executes a trap. TRAP Address 0.0.0.0 Enters the TRAP address. The TRAP address is disabled if the IP address is set 0.0.0.0. SysContact NULL Enters SysContact for MB-II object. Normally enter the administrator™s mail address. SysName NULL Enters SysName for MB-II object. Normally enter the host name or domain name. SysLocation NULL Enters SysLocation for MB-II object. Normally enter where the printer is located. Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription lp Port BOJ String NULL Sets the string that will be sent before sending a print job to the direct output port(lp). EOJ String NULL Sets the string that will be sent at the end of a print job to the direct output port(lp). enc/sjis Port BOJ String NULL Sets the string sent before sending the printing job to the output port via Kanji filter(sjis, euc). EOJ String \f Sets the string that will be sent at the end of the printing job to the output port via Kanji filter (sjis, euc). Printer Emulation ASCII Sets printer emulation (PDL). Changes to appropriate code when printing via Kanji filter (sjis, euc). Tab Size 8 char Sets the number of spaces that correspond to 1 tab. All tab codes will be converted to the spaces according to the number set here. This feature will not be available when this is set to 0 or when the job is directly sent to the printer. Page Width 0 char Sets the number of characters for the auto line feed feature of the Kanji filter. The auto line feed feature is not available when this is set to 0. Page Length 0 line Sets the number of lines for auto page feed feature of the Kanji filter between the number 0-255. The auto page feed feature is not available when this is set to 0. Downloaded From ManualsPrinter.com Manuals
Settings and Printing Network Network Maintenance and Spec. Setup in Windows Settings and Printing Network Network Maintenance and Spec.15 nStep 3: Installing LPR Port on the computer This step explains how to install LPR port monitor for KX-P7110 network printer port. Before installation, confirm that the printer is connected to the network correctly and is ready status. 1Insert the printer CD-ROM into the CD-ROM drive. The CD-ROM launches automatically. NOTE • If the CD-ROM does not launch automatically, perform the following steps (1) - (2). (1)Double click My computer icon. (2)Double click the CD-ROM icon. 2Click KX-P7110. 3Click Install Network Port. Downloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Finish Spool Settings... Start Downloaded From ManualsPrinter.com Manuals OK Spool Settings... Downloaded From ManualsPrinter.com Manuals Start File and Print Sharing... OK Downloaded From ManualsPrinter.com Manuals OK OK Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Windows 95 / Windows 98 / Windows Me 1Click , select Settings and then click Printers. 2Click your printer with the right mouse button. 3Click Properties. 4Click the Details tab. 5Click . The Add Port window is displayed. Browse... OK Next> Finish Start Add Port... Downloaded From ManualsPrinter.com Manuals Browse... OK OK OK Downloaded From ManualsPrinter.com Manuals Windows NT 4.0 / Windows 2000 1Click , select Settings and then click Printers. 2Click the printer with the right mouse button. 3Click Properties. 4Click the Por ts tab. 5Click . 6Click the Local Port for the printer port, and click . 7Enter the path of the printer connecting to the server according to the following form, then click . \\server name\printer name NOTE • You can confirm the server name and printer name as follows: (1) Double click the Network Neighborhood icon (for Windows NT 4.0) or My Network Places icon (for Windows 2000). (2) Double click the server connecting to the printer. 8Click . 9Click to close the printer properties window. Start Add Port... New Port... OK Close OK Downloaded From ManualsPrinter.com Manuals IPP Port Printing using TCP/IP in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port Printing using TCP/IP or IPX/SPX in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Downloaded From ManualsPrinter.com Manuals OK Setup Downloaded From ManualsPrinter.com Manuals OK Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Browse... OK Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... Browse... Downloaded From ManualsPrinter.com Manuals OK OK OKApply Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start OK Add... Downloaded From ManualsPrinter.com Manuals OK Continue Close Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> OK Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OK Start Downloaded From ManualsPrinter.com Manuals OK Separator Page... Browse... Open OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OKClose Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Standard TCP/IP Port printing in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Next> Next> Finish Close Close Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals IPP Port Printing Using TCP/IP in Windows 2000 Start Next> Downloaded From ManualsPrinter.com Manuals Next> Next> OK Have Disk... Browse... OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows 2000 Next> Finish Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.75 KX-P7110 Setup Utility uses TCP/IP. You need to set up AppleTalk and TCP/IP for your computer and printer. The printer does not work with AppleTalk Phase1. The following the outline of the steps how to set up in a Macintosh environment using the AppleTalk protocol. Step 1: Setting AppleTalk and TCP/IP on your computer Step 2: Setting up TCP/IP on the printer nStep 1: Setting AppleTalk and TCP/IP on your computer 1Select Control Panels from the Apple menu, then double click AppleTalk icon. 2Select Ethernet from the Connect via box. 3Close the dialog and click Save. 4Double click the TCP/IP icon in the Control Panels. Setup in Macintosh Downloaded From ManualsPrinter.com Manuals Continue Install Quit Downloaded From ManualsPrinter.com Manuals OK OK OK Downloaded From ManualsPrinter.com Manuals OK Setup OK OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.79 This chapter explains how to set to print from a client computer via the NetWare server. Perform the following steps to set up. Step 1: Setting up the printer and the server(see page 79) Step 2: Setting up the client (for Windows 95 / Windows 98 / Windows Me)(see page 99) nStep 1: Setting up the printer and the server There are three ways of setup. •Using NDS (Novell Directory Service) - PSERVER mode(see page 80) •Using NDS - RPRINTER (NPRINTER) mode(see page 86) •Using Bindery - PSERVER mode(see page 93) You may need to consult with your network administrator which to select. For the detailed information of these modes, refer to the NetWare online manual. The setting of the NetWare server is almost performed on the client. You must login into the server using the supervisor privilege. Novell Client software must be installed in your computer prior to setting up. NOTE • You can also perform the NDPS printing. For the detailed information, see the home page of Novell. Setup in NetWare In NetWare 4.x / NetWare 5 Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup NDS Setup Setup OKYes Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup OKYes Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup... Downloaded From ManualsPrinter.com Manuals OK Setup Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals In NetWare 3.x Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.106 This chapter explains how to set up printing in various UNIX environments. Supported UNIX variants are as follows: • Solaris 2.6 • Solaris 2.3x – 2.5x • HP-UX 9.x and 10.x • AIX 4.xx • BSD UNIX There are two ways of printing. • Printing using LPD • Printing using FTP LPD (Line Printer Daemon) is a network printing protocol and programs associated with printer spooling service installed on TCP/IP systems. Perform the following steps to set up. Step1: Setting up TCP/IP for the printer Step 2: Adding the printer to UNIX systems Step 3: Setting up print queues nStep1: Setting up TCP/IP for the printer Refer to “Step 2: Setting up TCP/IP for the printer” on page 9 in “LPR Port printing using TCP/ IP in Windows 95 / Windows 98 / Windows Me”. nStep 2: Adding the printer to UNIX systems Perform the following steps to add the printer as a network printer to UNIX systems. When editing the hosts file, contact your network administrator. Setup in UNIX Printing using LPD Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Printing using FTP Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.115 If an IP address have been assigned to a printer, you can access the printer’s Web Server. It allows monitoring or setting the printer. 1Open the browser (Internet Explorer or Netscape). 2Enter a printer address in the Address box and press Return key. The Web Server screen is displayed. Ex. http://172.16.xxx.xxx/ 1Display the Web Server screen (see above). 2Click Network Setup in the left pane. The Enter Network Password window is displayed. 3Type root in the User name box and click . •If the password is already set, the password must be entered in the Password box. 4Click the menu item (TCP/IP, NetWare...) and change the setting. Using the Web Server Displaying the Web Server Screen Setting the Printer OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.119 Press PRINT/RESET button on the printer panel less than 5 seconds to print the configuration page. It enables to reset the printer’s network settings to the factory default settings. 1Display the Network Setup Tool. •To display the Network Setup Tool window, refer to “Step 1: Setting up TCP/IP on the computer” on page 8 or “Step 2: Setting up TCP/IP on the printer” on page 76 2Click the KX-P7110 printer you want to set up in the list. 3Click the Setup menu, then click Network Factory Default. Printing a Configuration Page Resetting the Printer Settings to Factory Default Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use AppleTalk Protocol ENABLE Enables or disables AppleTalk protocol. Printer Name KX-P7110-xxxxxx Sets AppleTalk printer name. The name you set here can be seen from Selector. Zone Name * Sets zone name to which KX-P7110 belongs. If blank, KX-P7110 will automatically belongs to the zone name where AppleTalk router is set. nameFactory DefaultDescription Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use NetBEUI Protocol ENABLE Enables or disables NetBEUI protocol. Computer Name KXPxxxxxx Sets Computer name. This name is shown as the computer in Windows Explorer. Workgroup KXP-Printer Sets the workgroup to which KX-P7110 belongs. Comment Panasonic KX-P7110This comment is shown as the computer in Windows Explorer. nameFactory DefaultDescription Authentic Community ****** Sets SNMP authentic community name. This community name is authenticated when receiving SNMP Set Request. Use Authentic Trap DISABLE Enables or disables authentic trap. TRAP Community public Enters TRAP community name. This name will be used when the printer executes a trap. TRAP Address 0.0.0.0 Enters the TRAP address. The TRAP address is disabled if the IP address is set 0.0.0.0. SysContact NULL Enters SysContact for MB-II object. Normally enter the administrator™s mail address. SysName NULL Enters SysName for MB-II object. Normally enter the host name or domain name. SysLocation NULL Enters SysLocation for MB-II object. Normally enter where the printer is located. Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription lp Port BOJ String NULL Sets the string that will be sent before sending a print job to the direct output port(lp). EOJ String NULL Sets the string that will be sent at the end of a print job to the direct output port(lp). enc/sjis Port BOJ String NULL Sets the string sent before sending the printing job to the output port via Kanji filter(sjis, euc). EOJ String \f Sets the string that will be sent at the end of the printing job to the output port via Kanji filter (sjis, euc). Printer Emulation ASCII Sets printer emulation (PDL). Changes to appropriate code when printing via Kanji filter (sjis, euc). Tab Size 8 char Sets the number of spaces that correspond to 1 tab. All tab codes will be converted to the spaces according to the number set here. This feature will not be available when this is set to 0 or when the job is directly sent to the printer. Page Width 0 char Sets the number of characters for the auto line feed feature of the Kanji filter. The auto line feed feature is not available when this is set to 0. Page Length 0 line Sets the number of lines for auto page feed feature of the Kanji filter between the number 0-255. The auto page feed feature is not available when this is set to 0. Downloaded From ManualsPrinter.com Manuals
Settings and Printing Network Network Maintenance and Spec. Setup in Windows Settings and Printing Network Network Maintenance and Spec.15 nStep 3: Installing LPR Port on the computer This step explains how to install LPR port monitor for KX-P7110 network printer port. Before installation, confirm that the printer is connected to the network correctly and is ready status. 1Insert the printer CD-ROM into the CD-ROM drive. The CD-ROM launches automatically. NOTE • If the CD-ROM does not launch automatically, perform the following steps (1) - (2). (1)Double click My computer icon. (2)Double click the CD-ROM icon. 2Click KX-P7110. 3Click Install Network Port. Downloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Finish Spool Settings... Start Downloaded From ManualsPrinter.com Manuals OK Spool Settings... Downloaded From ManualsPrinter.com Manuals Start File and Print Sharing... OK Downloaded From ManualsPrinter.com Manuals OK OK Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Windows 95 / Windows 98 / Windows Me 1Click , select Settings and then click Printers. 2Click your printer with the right mouse button. 3Click Properties. 4Click the Details tab. 5Click . The Add Port window is displayed. Browse... OK Next> Finish Start Add Port... Downloaded From ManualsPrinter.com Manuals Browse... OK OK OK Downloaded From ManualsPrinter.com Manuals Windows NT 4.0 / Windows 2000 1Click , select Settings and then click Printers. 2Click the printer with the right mouse button. 3Click Properties. 4Click the Por ts tab. 5Click . 6Click the Local Port for the printer port, and click . 7Enter the path of the printer connecting to the server according to the following form, then click . \\server name\printer name NOTE • You can confirm the server name and printer name as follows: (1) Double click the Network Neighborhood icon (for Windows NT 4.0) or My Network Places icon (for Windows 2000). (2) Double click the server connecting to the printer. 8Click . 9Click to close the printer properties window. Start Add Port... New Port... OK Close OK Downloaded From ManualsPrinter.com Manuals IPP Port Printing using TCP/IP in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Finish Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port Printing using TCP/IP or IPX/SPX in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 95 / Windows 98 / Windows Me Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish Downloaded From ManualsPrinter.com Manuals OK Setup Downloaded From ManualsPrinter.com Manuals OK Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Browse... OK Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... Browse... Downloaded From ManualsPrinter.com Manuals OK OK OKApply Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start OK Add... Downloaded From ManualsPrinter.com Manuals OK Continue Close Yes Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> OK Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OK Start Downloaded From ManualsPrinter.com Manuals OK Separator Page... Browse... Open OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows NT 4.0 Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Downloaded From ManualsPrinter.com Manuals OK Close OKClose Downloaded From ManualsPrinter.com Manuals LPR Port printing using TCP/IP in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Standard TCP/IP Port printing in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Finish Downloaded From ManualsPrinter.com Manuals Start Add Port... New Port... Next> Next> Finish Close Close Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals IPP Port Printing Using TCP/IP in Windows 2000 Start Next> Downloaded From ManualsPrinter.com Manuals Next> Next> OK Have Disk... Browse... OK OK Downloaded From ManualsPrinter.com Manuals HP JetDirect Port printing using TCP/IP or IPX/SPX in Windows 2000 Next> Finish Downloaded From ManualsPrinter.com Manuals Using NetBEUI in Windows 2000 Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.75 KX-P7110 Setup Utility uses TCP/IP. You need to set up AppleTalk and TCP/IP for your computer and printer. The printer does not work with AppleTalk Phase1. The following the outline of the steps how to set up in a Macintosh environment using the AppleTalk protocol. Step 1: Setting AppleTalk and TCP/IP on your computer Step 2: Setting up TCP/IP on the printer nStep 1: Setting AppleTalk and TCP/IP on your computer 1Select Control Panels from the Apple menu, then double click AppleTalk icon. 2Select Ethernet from the Connect via box. 3Close the dialog and click Save. 4Double click the TCP/IP icon in the Control Panels. Setup in Macintosh Downloaded From ManualsPrinter.com Manuals Continue Install Quit Downloaded From ManualsPrinter.com Manuals OK OK OK Downloaded From ManualsPrinter.com Manuals OK Setup OK OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.79 This chapter explains how to set to print from a client computer via the NetWare server. Perform the following steps to set up. Step 1: Setting up the printer and the server(see page 79) Step 2: Setting up the client (for Windows 95 / Windows 98 / Windows Me)(see page 99) nStep 1: Setting up the printer and the server There are three ways of setup. •Using NDS (Novell Directory Service) - PSERVER mode(see page 80) •Using NDS - RPRINTER (NPRINTER) mode(see page 86) •Using Bindery - PSERVER mode(see page 93) You may need to consult with your network administrator which to select. For the detailed information of these modes, refer to the NetWare online manual. The setting of the NetWare server is almost performed on the client. You must login into the server using the supervisor privilege. Novell Client software must be installed in your computer prior to setting up. NOTE • You can also perform the NDPS printing. For the detailed information, see the home page of Novell. Setup in NetWare In NetWare 4.x / NetWare 5 Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup NDS Setup Setup OKYes Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Start Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup OKYes Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Finish OK Downloaded From ManualsPrinter.com Manuals Setup Setup... Downloaded From ManualsPrinter.com Manuals OK Setup Next> Downloaded From ManualsPrinter.com Manuals Next> Next> Next> Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals In NetWare 3.x Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.106 This chapter explains how to set up printing in various UNIX environments. Supported UNIX variants are as follows: • Solaris 2.6 • Solaris 2.3x – 2.5x • HP-UX 9.x and 10.x • AIX 4.xx • BSD UNIX There are two ways of printing. • Printing using LPD • Printing using FTP LPD (Line Printer Daemon) is a network printing protocol and programs associated with printer spooling service installed on TCP/IP systems. Perform the following steps to set up. Step1: Setting up TCP/IP for the printer Step 2: Adding the printer to UNIX systems Step 3: Setting up print queues nStep1: Setting up TCP/IP for the printer Refer to “Step 2: Setting up TCP/IP for the printer” on page 9 in “LPR Port printing using TCP/ IP in Windows 95 / Windows 98 / Windows Me”. nStep 2: Adding the printer to UNIX systems Perform the following steps to add the printer as a network printer to UNIX systems. When editing the hosts file, contact your network administrator. Setup in UNIX Printing using LPD Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Printing using FTP Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.115 If an IP address have been assigned to a printer, you can access the printer’s Web Server. It allows monitoring or setting the printer. 1Open the browser (Internet Explorer or Netscape). 2Enter a printer address in the Address box and press Return key. The Web Server screen is displayed. Ex. http://172.16.xxx.xxx/ 1Display the Web Server screen (see above). 2Click Network Setup in the left pane. The Enter Network Password window is displayed. 3Type root in the User name box and click . •If the password is already set, the password must be entered in the Password box. 4Click the menu item (TCP/IP, NetWare...) and change the setting. Using the Web Server Displaying the Web Server Screen Setting the Printer OK Downloaded From ManualsPrinter.com Manuals Settings and Printing Network Network Maintenance and Spec.119 Press PRINT/RESET button on the printer panel less than 5 seconds to print the configuration page. It enables to reset the printer’s network settings to the factory default settings. 1Display the Network Setup Tool. •To display the Network Setup Tool window, refer to “Step 1: Setting up TCP/IP on the computer” on page 8 or “Step 2: Setting up TCP/IP on the printer” on page 76 2Click the KX-P7110 printer you want to set up in the list. 3Click the Setup menu, then click Network Factory Default. Printing a Configuration Page Resetting the Printer Settings to Factory Default Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use AppleTalk Protocol ENABLE Enables or disables AppleTalk protocol. Printer Name KX-P7110-xxxxxx Sets AppleTalk printer name. The name you set here can be seen from Selector. Zone Name * Sets zone name to which KX-P7110 belongs. If blank, KX-P7110 will automatically belongs to the zone name where AppleTalk router is set. nameFactory DefaultDescription Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription Use NetBEUI Protocol ENABLE Enables or disables NetBEUI protocol. Computer Name KXPxxxxxx Sets Computer name. This name is shown as the computer in Windows Explorer. Workgroup KXP-Printer Sets the workgroup to which KX-P7110 belongs. Comment Panasonic KX-P7110This comment is shown as the computer in Windows Explorer. nameFactory DefaultDescription Authentic Community ****** Sets SNMP authentic community name. This community name is authenticated when receiving SNMP Set Request. Use Authentic Trap DISABLE Enables or disables authentic trap. TRAP Community public Enters TRAP community name. This name will be used when the printer executes a trap. TRAP Address 0.0.0.0 Enters the TRAP address. The TRAP address is disabled if the IP address is set 0.0.0.0. SysContact NULL Enters SysContact for MB-II object. Normally enter the administrator™s mail address. SysName NULL Enters SysName for MB-II object. Normally enter the host name or domain name. SysLocation NULL Enters SysLocation for MB-II object. Normally enter where the printer is located. Downloaded From ManualsPrinter.com Manuals nameFactory DefaultDescription lp Port BOJ String NULL Sets the string that will be sent before sending a print job to the direct output port(lp). EOJ String NULL Sets the string that will be sent at the end of a print job to the direct output port(lp). enc/sjis Port BOJ String NULL Sets the string sent before sending the printing job to the output port via Kanji filter(sjis, euc). EOJ String \f Sets the string that will be sent at the end of the printing job to the output port via Kanji filter (sjis, euc). Printer Emulation ASCII Sets printer emulation (PDL). Changes to appropriate code when printing via Kanji filter (sjis, euc). Tab Size 8 char Sets the number of spaces that correspond to 1 tab. All tab codes will be converted to the spaces according to the number set here. This feature will not be available when this is set to 0 or when the job is directly sent to the printer. Page Width 0 char Sets the number of characters for the auto line feed feature of the Kanji filter. The auto line feed feature is not available when this is set to 0. Page Length 0 line Sets the number of lines for auto page feed feature of the Kanji filter between the number 0-255. The auto page feed feature is not available when this is set to 0. Downloaded From ManualsPrinter.com Manuals