Panasonic KX P7110 User Manual
Have a look at the manual Panasonic KX P7110 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Clearing a Jam Settings and Printing Network Maintenance and Spec. Maintenance and Spec.16 When a media feed error has occurred, clear the media feed error as follows: 1Pull the media tray out of the printer or 2nd feeder (option). 2Tap the media stack on a level surface to avoid media jams or skewed printing. •If a media feed error has occurred, remove the media stack from the media tray and tap it. Jam at STD / Jam at OP Downloaded From ManualsPrinter.com Manuals Print side down Paper feeds in direction of arrow. Downloaded From ManualsPrinter.com Manuals $ # Downloaded From ManualsPrinter.com Manuals Jam at A Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Jam at B Downloaded From ManualsPrinter.com Manuals $ # CAUTION HOT SURFACE Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Jam at C # Rear side of Printer $ Downloaded From ManualsPrinter.com Manuals $ # Downloaded From ManualsPrinter.com Manuals Jam at D $ # CAUTION HOT SURFACE $ # Downloaded From ManualsPrinter.com Manuals Jam at E # Rear side of Printer $ Downloaded From ManualsPrinter.com Manuals $ # Downloaded From ManualsPrinter.com Manuals
Clearing a Jam Settings and Printing Network Maintenance and Spec. Maintenance and Spec.16 When a media feed error has occurred, clear the media feed error as follows: 1Pull the media tray out of the printer or 2nd feeder (option). 2Tap the media stack on a level surface to avoid media jams or skewed printing. •If a media feed error has occurred, remove the media stack from the media tray and tap it. Jam at STD / Jam at OP Downloaded From ManualsPrinter.com Manuals Print side down Paper feeds in direction of arrow. Downloaded From ManualsPrinter.com Manuals $ # Downloaded From ManualsPrinter.com Manuals Jam at A Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Jam at B Downloaded From ManualsPrinter.com Manuals $ # CAUTION HOT SURFACE Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Jam at C # Rear side of Printer $ Downloaded From ManualsPrinter.com Manuals $ # Downloaded From ManualsPrinter.com Manuals Jam at D $ # CAUTION HOT SURFACE $ # Downloaded From ManualsPrinter.com Manuals Jam at E # Rear side of Printer $ Downloaded From ManualsPrinter.com Manuals $ # Downloaded From ManualsPrinter.com Manuals
Clearing a Jam Settings and Printing Network Maintenance and Spec. Maintenance and Spec.16 When a media feed error has occurred, clear the media feed error as follows: 1Pull the media tray out of the printer or 2nd feeder (option). 2Tap the media stack on a level surface to avoid media jams or skewed printing. •If a media feed error has occurred, remove the media stack from the media tray and tap it. Jam at STD / Jam at OP Downloaded From ManualsPrinter.com Manuals Print side down Paper feeds in direction of arrow. Downloaded From ManualsPrinter.com Manuals $ # Downloaded From ManualsPrinter.com Manuals Jam at A Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Jam at B Downloaded From ManualsPrinter.com Manuals $ # CAUTION HOT SURFACE Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Jam at C # Rear side of Printer $ Downloaded From ManualsPrinter.com Manuals $ # Downloaded From ManualsPrinter.com Manuals Jam at D $ # CAUTION HOT SURFACE $ # Downloaded From ManualsPrinter.com Manuals Jam at E # Rear side of Printer $ Downloaded From ManualsPrinter.com Manuals $ # Downloaded From ManualsPrinter.com Manuals
Clearing a Jam Settings and Printing Network Maintenance and Spec. Maintenance and Spec.16 When a media feed error has occurred, clear the media feed error as follows: 1Pull the media tray out of the printer or 2nd feeder (option). 2Tap the media stack on a level surface to avoid media jams or skewed printing. •If a media feed error has occurred, remove the media stack from the media tray and tap it. Jam at STD / Jam at OP Downloaded From ManualsPrinter.com Manuals Print side down Paper feeds in direction of arrow. Downloaded From ManualsPrinter.com Manuals $ # Downloaded From ManualsPrinter.com Manuals Jam at A Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Jam at B Downloaded From ManualsPrinter.com Manuals $ # CAUTION HOT SURFACE Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals Jam at C # Rear side of Printer $ Downloaded From ManualsPrinter.com Manuals $ # Downloaded From ManualsPrinter.com Manuals Jam at D $ # CAUTION HOT SURFACE $ # Downloaded From ManualsPrinter.com Manuals Jam at E # Rear side of Printer $ Downloaded From ManualsPrinter.com Manuals $ # Downloaded From ManualsPrinter.com Manuals
Troubleshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec.29 Troubleshooting TroublePossible CauseCorrective Action The background of the images is printed in gray.The toner cartridge has reached the end of useful life.Replace the toner cartridge. The drum unit has reached the end of useful life.Replace the drum unit. Incorrect type of media is used. Check the media usable or not ( see “Media” on page 51). Your printer is in extremely high humidity.Check the environment ( see “Specifications” on page 47 ). Faded image is printed at the different position from the original.Printer driver is not set correctly for paper.Set the media type setting of the printer driver correctly (see 43 , 46 or 114 in “Settings and Printing”). The toner cartridge has reached the end of useful life.Replace the toner cartridge. Your printer is in extremely high or low humidity.Check the environment (see “Specifications” on page 47) Media is wet or dry. Set the Adjustment to media setting for + value (+1, +2 or +3) (see “Adjustment to Media” on page 35 in “Settings and Printing”). ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action 94 mm (3.7\262) 94 mm (3.7\262) 94 mm (3.7\262) 94 mm (3.7\262) Dust ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action A Downloaded From ManualsPrinter.com Manuals TroublePossibleCorrective Action Printer not operating. The printer may not be plugged into an AC outlet or turned on.Make sure that you plugged in the printer and turned it on. The interface cable(s) may not be connected properly.Make sure that you connected the interface cable(s) properly ( see “Parallel (IEEE1284) Interface” on page 57 ), [see “USB (Universal Serial Bus) Interface” on page 59 ]. Ensure the correct printer port is selected in the printer driver for cable used ( see “Setting the Printer Driver” on page 38 in “Settings and Printing”). The printer driver is not set correctly. The printer does not print correctly.Appropriate driver may not be installed or correct printer may not be selected.If the communication link between your computer and the printer is working but the printer ejects a blank page when printing from your application or through Windows, make sure that the appropriate driver is installed and that you have selected the printer correctly. When parallel interface is used and computer is set up in high- speed transfer mode (ECP mode), some computer cannot transfer data normally.Change the parallel interface of computer’s BIOS for compatible mode. The setting for printing is not effective.Some applications may not allow you to change the settings through the printer driver’s setting window.Change the application’s settings. Downloaded From ManualsPrinter.com Manuals TroublePossibleCorrective Action Downloaded From ManualsPrinter.com Manuals Cleaning the Photosensitive Drum # $ # $ # Downloaded From ManualsPrinter.com Manuals Paste Gear Downloaded From ManualsPrinter.com Manuals Dust Side pin# $ $ Downloaded From ManualsPrinter.com Manuals $ $ # Side pin Downloaded From ManualsPrinter.com Manuals
Troubleshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec.29 Troubleshooting TroublePossible CauseCorrective Action The background of the images is printed in gray.The toner cartridge has reached the end of useful life.Replace the toner cartridge. The drum unit has reached the end of useful life.Replace the drum unit. Incorrect type of media is used. Check the media usable or not ( see “Media” on page 51). Your printer is in extremely high humidity.Check the environment ( see “Specifications” on page 47 ). Faded image is printed at the different position from the original.Printer driver is not set correctly for paper.Set the media type setting of the printer driver correctly (see 43 , 46 or 114 in “Settings and Printing”). The toner cartridge has reached the end of useful life.Replace the toner cartridge. Your printer is in extremely high or low humidity.Check the environment (see “Specifications” on page 47) Media is wet or dry. Set the Adjustment to media setting for + value (+1, +2 or +3) (see “Adjustment to Media” on page 35 in “Settings and Printing”). ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action 94 mm (3.7\262) 94 mm (3.7\262) 94 mm (3.7\262) 94 mm (3.7\262) Dust ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action A Downloaded From ManualsPrinter.com Manuals TroublePossibleCorrective Action Printer not operating. The printer may not be plugged into an AC outlet or turned on.Make sure that you plugged in the printer and turned it on. The interface cable(s) may not be connected properly.Make sure that you connected the interface cable(s) properly ( see “Parallel (IEEE1284) Interface” on page 57 ), [see “USB (Universal Serial Bus) Interface” on page 59 ]. Ensure the correct printer port is selected in the printer driver for cable used ( see “Setting the Printer Driver” on page 38 in “Settings and Printing”). The printer driver is not set correctly. The printer does not print correctly.Appropriate driver may not be installed or correct printer may not be selected.If the communication link between your computer and the printer is working but the printer ejects a blank page when printing from your application or through Windows, make sure that the appropriate driver is installed and that you have selected the printer correctly. When parallel interface is used and computer is set up in high- speed transfer mode (ECP mode), some computer cannot transfer data normally.Change the parallel interface of computer’s BIOS for compatible mode. The setting for printing is not effective.Some applications may not allow you to change the settings through the printer driver’s setting window.Change the application’s settings. Downloaded From ManualsPrinter.com Manuals TroublePossibleCorrective Action Downloaded From ManualsPrinter.com Manuals Cleaning the Photosensitive Drum # $ # $ # Downloaded From ManualsPrinter.com Manuals Paste Gear Downloaded From ManualsPrinter.com Manuals Dust Side pin# $ $ Downloaded From ManualsPrinter.com Manuals $ $ # Side pin Downloaded From ManualsPrinter.com Manuals
Troubleshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec.29 Troubleshooting TroublePossible CauseCorrective Action The background of the images is printed in gray.The toner cartridge has reached the end of useful life.Replace the toner cartridge. The drum unit has reached the end of useful life.Replace the drum unit. Incorrect type of media is used. Check the media usable or not ( see “Media” on page 51). Your printer is in extremely high humidity.Check the environment ( see “Specifications” on page 47 ). Faded image is printed at the different position from the original.Printer driver is not set correctly for paper.Set the media type setting of the printer driver correctly (see 43 , 46 or 114 in “Settings and Printing”). The toner cartridge has reached the end of useful life.Replace the toner cartridge. Your printer is in extremely high or low humidity.Check the environment (see “Specifications” on page 47) Media is wet or dry. Set the Adjustment to media setting for + value (+1, +2 or +3) (see “Adjustment to Media” on page 35 in “Settings and Printing”). ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action 94 mm (3.7²) 94 mm (3.7²) 94 mm (3.7²) 94 mm (3.7²) Dust ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action A Downloaded From ManualsPrinter.com Manuals TroublePossibleCorrective Action Printer not operating. The printer may not be plugged into an AC outlet or turned on.Make sure that you plugged in the printer and turned it on. The interface cable(s) may not be connected properly.Make sure that you connected the interface cable(s) properly ( see “Parallel (IEEE1284) Interface” on page 57 ), [see “USB (Universal Serial Bus) Interface” on page 59 ]. Ensure the correct printer port is selected in the printer driver for cable used ( see “Setting the Printer Driver” on page 38 in “Settings and Printing”). The printer driver is not set correctly. The printer does not print correctly.Appropriate driver may not be installed or correct printer may not be selected.If the communication link between your computer and the printer is working but the printer ejects a blank page when printing from your application or through Windows, make sure that the appropriate driver is installed and that you have selected the printer correctly. When parallel interface is used and computer is set up in high- speed transfer mode (ECP mode), some computer cannot transfer data normally.Change the parallel interface of computer’s BIOS for compatible mode. The setting for printing is not effective.Some applications may not allow you to change the settings through the printer driver’s setting window.Change the application’s settings. Downloaded From ManualsPrinter.com Manuals TroublePossibleCorrective Action Downloaded From ManualsPrinter.com Manuals Cleaning the Photosensitive Drum # $ # $ # Downloaded From ManualsPrinter.com Manuals Paste Gear Downloaded From ManualsPrinter.com Manuals Dust Side pin# $ $ Downloaded From ManualsPrinter.com Manuals $ $ # Side pin Downloaded From ManualsPrinter.com Manuals
Troubleshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec.29 Troubleshooting TroublePossible CauseCorrective Action The background of the images is printed in gray.The toner cartridge has reached the end of useful life.Replace the toner cartridge. The drum unit has reached the end of useful life.Replace the drum unit. Incorrect type of media is used. Check the media usable or not ( see “Media” on page 51). Your printer is in extremely high humidity.Check the environment ( see “Specifications” on page 47 ). Faded image is printed at the different position from the original.Printer driver is not set correctly for paper.Set the media type setting of the printer driver correctly (see 43 , 46 or 114 in “Settings and Printing”). The toner cartridge has reached the end of useful life.Replace the toner cartridge. Your printer is in extremely high or low humidity.Check the environment (see “Specifications” on page 47) Media is wet or dry. Set the Adjustment to media setting for + value (+1, +2 or +3) (see “Adjustment to Media” on page 35 in “Settings and Printing”). ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action 94 mm (3.7\262) 94 mm (3.7\262) 94 mm (3.7\262) 94 mm (3.7\262) Dust ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action A Downloaded From ManualsPrinter.com Manuals TroublePossibleCorrective Action Printer not operating. The printer may not be plugged into an AC outlet or turned on.Make sure that you plugged in the printer and turned it on. The interface cable(s) may not be connected properly.Make sure that you connected the interface cable(s) properly ( see “Parallel (IEEE1284) Interface” on page 57 ), [see “USB (Universal Serial Bus) Interface” on page 59 ]. Ensure the correct printer port is selected in the printer driver for cable used ( see “Setting the Printer Driver” on page 38 in “Settings and Printing”). The printer driver is not set correctly. The printer does not print correctly.Appropriate driver may not be installed or correct printer may not be selected.If the communication link between your computer and the printer is working but the printer ejects a blank page when printing from your application or through Windows, make sure that the appropriate driver is installed and that you have selected the printer correctly. When parallel interface is used and computer is set up in high- speed transfer mode (ECP mode), some computer cannot transfer data normally.Change the parallel interface of computer’s BIOS for compatible mode. The setting for printing is not effective.Some applications may not allow you to change the settings through the printer driver’s setting window.Change the application’s settings. Downloaded From ManualsPrinter.com Manuals TroublePossibleCorrective Action Downloaded From ManualsPrinter.com Manuals Cleaning the Photosensitive Drum # $ # $ # Downloaded From ManualsPrinter.com Manuals Paste Gear Downloaded From ManualsPrinter.com Manuals Dust Side pin# $ $ Downloaded From ManualsPrinter.com Manuals $ $ # Side pin Downloaded From ManualsPrinter.com Manuals
Troubleshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec.29 Troubleshooting TroublePossible CauseCorrective Action The background of the images is printed in gray.The toner cartridge has reached the end of useful life.Replace the toner cartridge. The drum unit has reached the end of useful life.Replace the drum unit. Incorrect type of media is used. Check the media usable or not ( see “Media” on page 51). Your printer is in extremely high humidity.Check the environment ( see “Specifications” on page 47 ). Faded image is printed at the different position from the original.Printer driver is not set correctly for paper.Set the media type setting of the printer driver correctly (see 43 , 46 or 114 in “Settings and Printing”). The toner cartridge has reached the end of useful life.Replace the toner cartridge. Your printer is in extremely high or low humidity.Check the environment (see “Specifications” on page 47) Media is wet or dry. Set the Adjustment to media setting for + value (+1, +2 or +3) (see “Adjustment to Media” on page 35 in “Settings and Printing”). ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action 94 mm \(3.7\262\) 94 mm \(3.7\262\) 94 mm \(3.7\262\) 94 mm \(3.7\262\) Dust ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action A Downloaded From ManualsPrinter.com Manuals TPCorrective Action Printer not operating. The printer may not be plugged into an AC outlet or turned on.Make sure that you plugged in the printer and turned it on. The interface cable(s) may not be connected properly.Make sure that you connected the interface cable(s) properly ( see “Parallel (IEEE1284) Interface” on page 57 ), [see “USB (Universal Serial Bus) Interface” on page 59 ]. Ensure the correct printer port is selected in the printer driver for cable used ( see “Setting the Printer Driver” on page 38 in “Settings and Printing”). The printer driver is not set correctly. The printer does not print correctly.Appropriate driver may not be installed or correct printer may not be selected.If the communication link between your computer and the printer is working but the printer ejects a blank page when printing from your application or through Windows, make sure that the appropriate driver is installed and that you have selected the printer correctly. When parallel interface is used and computer is set up in high- speed transfer mode (ECP mode), some computer cannot transfer data normally.Change the parallel interface of computer’s BIOS for compatible mode. The setting for printing is not effective.Some applications may not allow you to change the settings through the printer driver’s setting window.Change the application’s settings. Downloaded From ManualsPrinter.com Manuals TroublePossibleCorrective Action Downloaded From ManualsPrinter.com Manuals Cleaning the Photosensitive Drum # $ # $ # Downloaded From ManualsPrinter.com Manuals Paste Gear Downloaded From ManualsPrinter.com Manuals Dust Side pin# $ $ Downloaded From ManualsPrinter.com Manuals $ $ # Side pin Downloaded From ManualsPrinter.com Manuals
Troubleshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec.29 Troubleshooting TroublePossible CauseCorrective Action The background of the images is printed in gray.The toner cartridge has reached the end of useful life.Replace the toner cartridge. The drum unit has reached the end of useful life.Replace the drum unit. Incorrect type of media is used. Check the media usable or not ( see “Media” on page 51). Your printer is in extremely high humidity.Check the environment ( see “Specifications” on page 47 ). Faded image is printed at the different position from the original.Printer driver is not set correctly for paper.Set the media type setting of the printer driver correctly (see 43 , 46 or 114 in “Settings and Printing”). The toner cartridge has reached the end of useful life.Replace the toner cartridge. Your printer is in extremely high or low humidity.Check the environment (see “Specifications” on page 47) Media is wet or dry. Set the Adjustment to media setting for + value (+1, +2 or +3) (see “Adjustment to Media” on page 35 in “Settings and Printing”). ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action 94 mm (3.7\262) 94 mm (3.7\262) 94 mm (3.7\262) 94 mm (3.7\262) Dust ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- ABCD-------- ----------------- -------- Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action Downloaded From ManualsPrinter.com Manuals TroublePossible CauseCorrective Action A Downloaded From ManualsPrinter.com Manuals TroublePossibleCorrective Action Printer not operating. The printer may not be plugged into an AC outlet or turned on.Make sure that you plugged in the printer and turned it on. The interface cable(s) may not be connected properly.Make sure that you connected the interface cable(s) properly ( see “Parallel (IEEE1284) Interface” on page 57 ), [see “USB (Universal Serial Bus) Interface” on page 59 ]. Ensure the correct printer port is selected in the printer driver for cable used ( see “Setting the Printer Driver” on page 38 in “Settings and Printing”). The printer driver is not set correctly. The printer does not print correctly.Appropriate driver may not be installed or correct printer may not be selected.If the communication link between your computer and the printer is working but the printer ejects a blank page when printing from your application or through Windows, make sure that the appropriate driver is installed and that you have selected the printer correctly. When parallel interface is used and computer is set up in high- speed transfer mode (ECP mode), some computer cannot transfer data normally.Change the parallel interface of computer’s BIOS for compatible mode. The setting for printing is not effective.Some applications may not allow you to change the settings through the printer driver’s setting window.Change the application’s settings. Downloaded From ManualsPrinter.com Manuals TroublePossibleCorrective Action Downloaded From ManualsPrinter.com Manuals Cleaning the Photosensitive Drum # $ # $ # Downloaded From ManualsPrinter.com Manuals Paste Gear Downloaded From ManualsPrinter.com Manuals Dust Side pin# $ $ Downloaded From ManualsPrinter.com Manuals $ $ # Side pin Downloaded From ManualsPrinter.com Manuals