Panasonic KX P7110 User Manual

							 
Upgrade Options
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.
 
5 
2 
Slide the option cover and remove it. 
3 
Remove the two screws, then remove the metal plate.
# $
Downloaded From ManualsPrinter.com Manuals 
						

							 
Upgrade Options
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.
 
6 
4 
Connect the optional board to the following connector as illustrated
below. 
5 
Install the metal plate in the printer. 
6 
Fasten the metal plate with the two screws removed earlier.
CN1
Upgrade kit
CN2RAM board
#
$
Downloaded From ManualsPrinter.com Manuals 
						

							 
Upgrade Options
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.
 
7 
7 
Install the option cover. 
8 
Plug in the power cord and reconnect any cables to the back of the
printer.
Downloaded From ManualsPrinter.com Manuals 
						

							 
Upgrade Options
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.
 
8 
If you install the RAM board, set the printer driver for the printer’s installed memory (see
“Setting the Device Options” below).
If you install the Upgrade Kit (for PostScript), install the printer driver for PostScript and set it.
To install the printer driver for PostScript in Windows or Macintosh, refer to the Setup Guide.
To set the printer driver in Windows, see  “Setting the Printer Driver for PostScript in Windows”
on page 9. To set the printer driver in Macintosh, see “Macintosh” of “Settings and Printing” in
the Operating Instructions. 
n 
Setting the Device Options 
• Printer driver for PCL: 
(1) Click the  
Device  
tab (Windows 95 
* 
1
 
/Windows 98 
* 
2
 
/Windows Me 
* 
3
 
) or   
Device
Settings  
tab (Windows NT® 4.0 
* 
4
 
 or Windows 2000 
* 
5
 
).
(2) Change the installed memory of the printer. 
• Printer driver for PostScript in Windows: 
Refer to the help menu in Windows. 
• Printer driver for PostScript in Macintosh: 
See “see “Setting the Installable Options” on page 116 in “Macintosh” of “Settings and
Printing”. 
* 
1
 
Microsoft® Windows® 95 operating system (hereafter Windows 95) 
* 
2
 
  
Microsoft® Windows® 98 operating system (hereafter Windows 98) 
* 
3
 
  
Microsoft® Windows® Millennium Edition operating system (hereafter Windows Me) 
* 
4
 
  
Microsoft® Windows NT® operating system Version 4.0 (hereafter Windows NT 4.0) 
* 
5
 
  
Microsoft® Windows® 2000 operating system (hereafter Windows 2000) 
Setting the Printer Driver
Downloaded From ManualsPrinter.com Manuals 
						

							 
Upgrade Options
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.
 
9 
n 
Setting the Printer Driver for PostScript in Windows 
It is possible to set the printer by using the printer properties window. It can be displayed from
Windows (see below) or from an application. To display the printer properties window from an
application, select the Panasonic KX-P7105 PS or Panasonic KX-P7110 PS printer in the print
window and click Properties.
When setting the printer by using the printer properties window under Windows (Start -
Settings - Printers), the setting is retained even if Windows is shutdown and restarted.
However, when setting the printer from an application, the setting is returned to the default
setting if the application is closed.  
1 
Click , select  
Settings 
, then click  
Printers 
. 
The Printers window is displayed. 
2 
Click the  
Panasonic KX-P7105 PS 
 or  
Panasonic KX-P7110 PS 
 icon. 
3 
Click the  
File 
 menu, then click the following menu depending on the
operating system
-  
Properties 
 (Windows 95 / Windows 98 / Windows Me)
-  
Document Default 
... (Windows NT 4.0)
-  
Printing Preferences 
... (Windows 2000). 
The printer properties window is displayed.
•Tabs are different in Windows NT 4.0 / Windows 2000.
•For Windows NT 4.0 / Windows 2000, it enables you to set another items by selecting
Properties of the File menu. 
4 
Click the appropriate tab and set it.
Start
Downloaded From ManualsPrinter.com Manuals 
						

							 
Cleaning the Printer
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.
 
10 
Periodic cleaning of the printer is recommended. The frequency of cleaning is dependent
upon the environment in which the printer is used.
You should clean the printer:
• at least once a month.
• when you replace the toner cartridge.
• when print quality has deteriorated. 
CAUTION 
• Do not use benzene, thinner, aerosol cleaners, or any abrasive powder. 
1 
Turn the power OFF. 
2 
Clean all the covers with a soft cloth. Use any mild commercial cleaner. 
1 
Turn the power off and remove the power cord for your safety. 
2 
Remove the media tray out of the printer. 
Cleaning the Printer 
External
Internal
Downloaded From ManualsPrinter.com Manuals 
						

							 
Cleaning the Printer
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.
 
11 
3 
While rotating the pick up roller, wipe it with a soft cloth that has been
moistened with a mild commercial cleaner. 
4 
Open the front cover. 
5 
Lift the drum unit up (  
# 
 ) and slide it out of the printer (  
$ 
 ). 
•To avoid possible toner spillage, it is recommended to place the drum unit on a
newspaper or drop cloth.
Pick up roller
#
$
#
Downloaded From ManualsPrinter.com Manuals 
						

							 
Cleaning the Printer
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.
 
12
SAFETY CAUTION 
• It is very hot inside the printer; to avoid personal injury, do not touch the components
illustrated below. 
CAUTION 
• To prevent any damage to the drum unit, observe the following precautions.
— Do not touch the black drum surface illustrated below. 
— Do not expose the drum unit to light for more than 5 minutes.
— Do not expose the drum unit to direct sunlight.
— Do not keep the drum unit near dust or dirt.
— Do not place the drum unit in a high humid area.
• Do not touch electrodes illustrated below to prevent static electricity damage to the printer.
!
CAUTION:
HOT SURFACE
Black drum
Electrodes (shown in red)
Downloaded From ManualsPrinter.com Manuals 
						

							 
Cleaning the Printer
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.
 
13
6Wipe rollers (A) and (B), and paper chute with a soft cloth that has been
moistened with a mild commercial cleaner.
•Be sure to remove the paper dust.
NOTE
• Front rollers (A) can be rotated half. Inner rollers (B) can be rotated to the direction of the
arrow. Be sure not to damage the sheets in front of the inner rollers (B).
7Turn the sponge up and carefully wipe the laser unit cover glass with a
dry lint-free cloth.
CAUTION
To avoid a damage to the printer,
• Do not use rubbing alcohol to wipe the laser unit cover glass. 
• Do not touch the laser unit cover glass by hand.
(A)(B)
Sheet: Not to damage
Paper chute
Laser unit cover glass:
Not to touch by hand
Downloaded From ManualsPrinter.com Manuals 
						

							Cleaning the Printer
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.14
8Carefully wipe the corona wire of the drum unit by sliding a dry cotton
swab from end to end a few times.
9Firmly insert the drum unit in the slot of the printer ( # ) [insert the side
pins of the drum unit into the groove (label  )]. Push down ( $ ). 
10Close the front cover and replace the media tray into the printer.
corona wire
$
$
#
Side pin
Downloaded From ManualsPrinter.com Manuals