Panasonic Kx Mc6020 Operating Instructions Manual

							11. Help
91
For assistance, please visit http://www.panasonic.com/help
11.3.6 Network
ProblemCause & Solution
I cannot operate the following 
functions.
–PC printing
–Scanning
–Remote Control
–PC FAX
–Device MonitorLConfirm the LED via the LAN port of the main board. If the LED is glowing 
or blinking, the network access is working correctly.
If the LED is not glowing or blinking, confirm the LAN cable (category 5 
straight cable) is connected to the LAN port of the main board correctly.
LIf the LED is blinking and you cannot perform the desired operation, the IP 
address of the unit may have changed.
To detect the IP address, proceed as follows.
[Start] i [All Programs] or [Programs] i [Panasonic] i the 
unit’s name i [IP Address Checker]
LThe IP address for the unit will be detected.
Note:
LIf the IP address cannot be detected, enter it manually (feature #501 on 
page 70). The IP address of the computer and the unit must be in the 
same local IP address class as shown below. Set the IP address in the 
range of the number specified in the class corresponding to your local 
network scale.
Class Subnet mask IP address
Class A 255.0.0.0 10.0.0.1 -
10.255.255.254
Class B 255.255.0.0 172.xx.0.1 -
172.xx.255.254
*1
Class C 255.255.255.0 192.168.xx.1 -
192.168.xx.254*2
*1 “xx” should be the same value for the unit and for the computer, as 
shown in the following example.
Example: 172.16.0.1 - 172.16.255.254
(The available range of “xx” is 16 - 31)
*2 “xx” should be the same value for the unit and for the computer, as 
shown in the following example.
Example: 192.168.0.1 - 192.168.0.254
(The available range of “xx” is 0 - 255)
LYour firewall software is blocking the connection. Disable the firewall 
software or change the firewall settings to make the Multi-Function Station 
work properly.
LLAN features can be used when the unit and the computer are connected in 
same network segment only. Make sure the network is configured correctly. 
Consult your network administrator.
The unit does not appear in 
the [Select a Network Device] 
dialog box when installing 
Multi-Function Station.LYour firewall software is blocking the connection and the setup program may 
not list any units. Consult your network administrator and temporarily 
disable the firewall software.
LThe unit is connected to another network segment and the setup program 
may not list any units. Make sure the network is configured correctly. 
Consult your network administrator. 
						

							11. Help
92
For assistance, please visit http://www.panasonic.com/help
11.3.7 Using an answering machine
11.3.8 If a power failure occurs
LThe unit will not function.
LIf any documents are stored in the memory (i.e. during copy, PC printing, fax transmission or fax reception), they 
will be lost.
LThe unit is not designed for making emergency telephone calls when the power fails. Alternative arrangements 
should be made for access to emergency services.
LFax transmission and reception will be interrupted.
LWhen power is restored, a power down report will be printed out stating which fax items in the memory have been 
erased.
11.3.9 Firewall setting tool for Microsoft Windows XP Service Pack 2/Windows Vista users 
(LAN connection only)
After installing Microsoft Windows XP Service Pack 2/Windows Vista, you will not be able to use the following 
functions because the Windows Firewall feature will be activated and block the connection.
–Device Monitor
– LPD Manager (Network communication tool)
The Windows Firewall Setting Tool enables you to change the Windows Firewall security settings and to use the above 
functions properly.
1Insert the CD-ROM that is supplied with the unit into your CD-ROM drive. The [Windows Security Alert] 
dialog box appears and asks 
if I want to block 
[PCCMFLPD] and I cannot 
operate the following 
functions after installing the 
Microsoft Windows XP 
Service Pack 2.
–PC printing
–Scanning
–Remote Control
–PC FAX
–Device MonitorLClick [Keep Blocking] and run the Windows Firewall Setting Tool to allow 
the data transmission for Multi-Function Station (page 92).
ProblemCause & Solution
I cannot receive documents 
automatically.LYour greeting message on the answering machine is too long. Shorten the 
message. Record a message up to 10 seconds long.
LThe answering machine rings too many times. Set to 1 or 2 rings.
I cannot receive voice 
messages.LCheck if the answering machine is turned ON and connected to the unit 
properly (page 50).
LSet the number of rings on the answering machine to 1 or 2.
I pressed the remote access 
code to access the answering 
machine remotely, but the line 
was disconnected.LThe code may include “#” which is used for certain features provided by 
telephone companies. Change the code on the answering machine to 
another number which does not include “#”.
Callers complain that they 
cannot send a document.LThere is no room left in memory of your answering machine to record voice 
messages. See the operating instructions of the answering machine and 
erase unnecessary messages.
LYou set the answering machine to only give a greeting message.
ProblemCause & Solution 
						

							11. Help
93
For assistance, please visit http://www.panasonic.com/help LIf the [Select Language] dialog box appears, select the desired language that you want to use with this 
software. Click [OK].
2[Tools] i [Windows Firewall Setting]
LThe [Windows Firewall Setting Tool] window will appear.
3[Add to the exceptions list] i [OK] i [OK]
To confirm the security settings (For Windows XP users)
1.[Start] i [Control Panel] i [Security Center]
LThe [Windows Security Center] window will appear.
2.[Windows Firewall]
LThe [Windows Firewall] dialog box will appear.
3.Click the [Exceptions] tab.
4.Confirm that [Panasonic Trap Monitor Service] and [PCCMFLPD] are displayed and checked on the 
[Programs and Services] list.
To confirm the security settings (For Windows Vista users)
1.[Start] i [Control Panel] i [Security Center]
LThe [Windows Security Center] window will appear.
2.[Windows Firewall]
LThe [Windows Firewall] dialog box will appear.
3.[Change settings]
LThe [User Account Control] dialog box will appear.
4.[Continue]
5.Click the [Exceptions] tab.
6.Confirm that [Panasonic Trap Monitor Service], [PCMFSMLM] and [PCCMFLPD] are displayed and checked 
on the [Program or port] list.
11.3.10 Notice for KX-MB200/KX-MB700/KX-FLB880 series users
If you have already installed KX-MB200/KX-MB700/KX-FLB880 series Multi-Function Station on your computer, the 
instructions of modifying or adding printer driver change after installing KX-MC6000 series Multi-Function Station.
You can modify or add printer driver, as follows.
1Start Windows and insert the KX-MB200/KX-MB700/KX-FLB880 series CD-ROM into your CD-ROM drive.
LIf the [Select Language] dialog box appears, select the desired language that you want to use with this 
software. Click [OK].
2[Easy installation]
3[Modify] i [Next]
4Select [Modify Utility] or [Add Printer Driver]. i [Next]. Then follow the on-screen instructions.
Important:
LFor users of versions prior to 1.12, download the latest software as follows, then activate it.
[Start] i [All Programs] or [Programs] i [Panasonic] i the unit’s name i [Support Web 
Page]. Then follow the on-screen instructions. 
						

							12. Paper Jams
94
12 Paper Jams Jams
12.1 Recording paper jam
Caution:
LDo not pull out the jammed paper forcibly before 
opening the left cover.
LDo not open the paper input tray as the jammed 
paper may be pulled and the jam may get worse.
12.1.1 When the recording paper has 
jammed inside of the unit
The display will show the following.
“PAPER JAMMED”
b
“OPEN LEFT COVER HOT CAUTION”
1Push the left cover open lever (1) upward, then pull 
open the left cover (2).
Note:
LDo not touch the rollers (4).
Caution:
LDuring or immediately after printing, 
the fuser unit (3) gets hot. Wait until 
the fuser unit cools down before 
removing the jammed paper.
3
4
2
1 
						

							12. Paper Jams
95
2Remove the jammed paper.
Case 1:
When the recording paper has jammed near the 
rollers:
1.Remove the jammed paper (5) carefully by pulling it 
toward you.
2.Close the left cover.Case 2:
When the recording paper has jammed near the 
fuser unit:
1.Lift both green levers (6) until they stop.
2.Remove the jammed paper (7) carefully by pulling it 
toward you.
Example 1:
Example 2:
5
6
7
7 
						

							12. Paper Jams
96
3.Push back the green levers (8) to the original 
position.
4.Close the left cover.Case 3:
When the recording paper has jammed inside of the 
optional automatic duplex unit:
1.Close the left cover.
2.Open the automatic duplex unit cover (9).
3. When the document has jammed near the roller:
Hold the automatic duplex unit cover and remove the 
jammed paper (j) carefully by pulling it upward.
8
9
j 
						

							12. Paper Jams
97
When the document has jammed near the 
recording paper exit of the automatic duplex unit:
Hold the automatic duplex unit cover and remove the 
jammed paper (k) carefully by pulling it toward you.
4.Close the automatic duplex unit cover.12.1.2 When the recording paper has 
jammed near the optional input tray
The display will show the following.
“PAPER JAMMED”
b
“OPEN TRAY #2 LEFT COVER”
1Open the cover (1) at the left side of the optional 
input tray.
2Remove the jammed paper (2).
k
1
2 
						

							12. Paper Jams
98
3Close the cover at the left side of the optional input 
tray.12.1.3 When the recording paper is not fed 
into the unit properly
The display will show the following.
–“CHECK PICK UP INPUT TRAY #1” (standard 
input tray)
–“CHECK PICK UP INPUT TRAY #2” (optional input 
tray)
1Pull the paper input tray until it clicks into place, then 
pull it completely out, lifting the front part of the tray. 
Remove the recording paper and straighten.
2Re-load the recording paper.
Standard input tray:
Optional input tray:
3Insert the paper input tray to the unit, lifting the front 
part of the tray. Then push it completely into the unit.
Note:
LIf the error message is still displayed, check the 
recording paper specifications and re-install 
recording paper. See page 15 and page 79 for 
details. 
						

							12. Paper Jams
99
12.2 Document jams (Automatic 
document feeder)
Caution:
LDo not pull out the jammed document forcibly 
before lifting the ADF cover.
1Open the ADF cover (1) while holding the 
document cover (2).
2Remove the jammed document (3) carefully.
When the document has jammed near the 
document entrance:
When the document has jammed near the 
document exit:
3Close the ADF cover.
1
2
3
3 
						

							13. Cleaning
100
13 Clean in g Cleaning
13.1 Cleaning the white plates 
and glass
Clean the white plates and glass when a black line, a 
white line or a dirty pattern appears on:
– your recording paper,
– the original document,
– the scanned data, or
– the fax document received by the other party.
Caution:
LDo not use paper products, such as paper towels 
or tissues for cleaning.
1Open the document cover (1).
2Hold the document cover (2) while cleaning the 
white plates (3) and the scanner glass (4).
3Close the document cover (5).
1
2
4
3
5