Panasonic Kx Mb271 Operating Instructions Manual

5. Copier
31
5.1.2 Using the auto document feeder
1
If the {COPY} light is OFF, turn it ON by pressing 
{COPY}.
2Set the original (page 17).
3If necessary, change the resolution and contrast 
according to the type of document.
LTo select the resolution, see page 30.
LTo select the contrast, see page 30.
4If necessary, enter the number of copies (up to 99).
5{START}
LThe unit will start copying.
6After you finish copying, press {STOP} to reset the 
settings you set in step 3 and 4.
Note:
LTo stop copying,...

5. Copier
32
Example: 150% enlarged copy
Using the scanner glass (1):
Using the auto document feeder:
Example: 70% reduced copy
Using the scanner glass (1):
Using the auto document feeder:5.2.2 To copy 2-sided documents onto 1 
page (Quick ID copy feature) (Scanner 
glass only)
You can make copies of both sides of 2-sided documents 
and print them on the same side of paper. The 
documents will not be reduced to fit the recording paper, 
so this feature is useful for copying small sized 
documents such as...

5. Copier
33
Note:
LYou can save the previous page layout setting 
(feature #467 on page 55).
5.2.3 To make a poster size copy (Poster 
feature) (Scanner glass only)
You can make copies divided in to 4 (“2 × 2”) or 9 (“3 
× 3”) sections to make enlarged copies of the individual 
sections. You can then glue them together to make a 
poster.
1Set the original (page 17).
2Press {PA G E  L AYO U T} repeatedly to select 
“POSTER”. i {SET}
3Press {V} or {^} repeatedly to select “2 × 2” or “3 
× 3”. i {SET}...

5. Copier
34
Note:
LYou can save the previous page layout setting 
(feature #467 on page 55).
5.2.5 To collate multiple copies
The unit can collate multiple copies in the same order as 
the original document pages.
1Set the original (page 17).
2Press {COLLATE} repeatedly to display “ON”.
3{SET}
4Enter the number of copies (up to 99).
5When using the scanner glass:
1.{START}
LThe unit will scan 1 page.
2.Place the next document on the scanner glass 
and press {SET}. Repeat this until all the 
documents...

6. Fax (KX-MB781 only)
35
6 Fax  (KX-MB781  on ly ) Sen ding Faxes
6.1 Sending a fax manually
6.1.1 Using the scanner glass
By using the scanner glass, you can send a page from 
booklets or small size paper that cannot be sent with the 
auto document feeder.
1If the {FA X} light is OFF, turn it ON by pressing 
{FA X}.
2Set the original (page 17).
3If necessary, change the resolution and contrast 
according to the type of document.
LTo select the resolution, see page 35.
LTo select the contrast, see page...

6. Fax (KX-MB781 only)
36
activated (page 52). For an explanation of error 
messages, see page 63.
6.1.2 Using the auto document feeder
1
If the {FA X} light is OFF, turn it ON by pressing 
{FA X}.
2Set the original (page 17).
3If necessary, change the resolution and contrast 
according to the type of document.
LTo select the resolution, see page 35.
LTo select the contrast, see page 35.
4{MONITOR}
5Dial the fax number. i {START}
Note:
LTo stop sending, see page 61.
LSee page 17 for document...

6. Fax (KX-MB781 only)
37
4{MENU}
Note:
LA hyphen or a space entered in a telephone number 
counts as 2 digits.
6.2.3 Editing a stored item
1
{DIRECTORY}
2Press {V} or {^} repeatedly to display the desired 
item. i {MENU} i {*}
3Edit the name if necessary. For further details, see 
the storing procedure on page 36. i {SET}
4Edit the telephone number if necessary. For further 
details, see the storing procedure on page 36. i 
{SET}
6.2.4 Erasing a stored item
1
{DIRECTORY}
2Press {V} or {^} repeatedly to...

6. Fax (KX-MB781 only)
38
3Enter the fax number using one-touch dial or 
navigator directory.
4{START}
6.4 Broadcast transmission
By storing one-touch dial and navigator directory items 
(page 36) into the broadcast memory, you can send the 
same document to multiple parties (up to 20). Your 
programmed items will remain in the broadcast memory, 
allowing frequent re-use.
LThe broadcast function utilizes stations 1–2. The 
one-touch dial function will be canceled.
LMake sure that the {FA X} light is ON....

6. Fax (KX-MB781 only)
39
2Press {V} or {^} repeatedly to display the desired 
broadcast memory (“” or “”). i {MENU} i {*}
3Press {V} or {^} repeatedly to display the desired 
item you want to add. i {SET}
LTo add other items, repeat this step (up to 20 
items).
4{STOP}
Note:
LWhen adding new items to the MANUAL 
BROADCAST memory, you can only select stored 
items.
6.4.3 Erasing a stored item from the 
broadcast memory
1
{DIRECTORY}
2Press {V} or {^} repeatedly to display the desired 
broadcast memory...

6. Fax (KX-MB781 only)
40
6.5 Sending a computer 
document as a fax message from 
your computer
You can access the fax function from a Windows 
application using Multi-Function Station.
For example, to send a document created from 
WordPad, proceed as follows.
1Open the document you want to send.
2Select [Print...] from the [File] menu.
LThe [Print] dialog box will appear.
3Select the PCFAX unit’s name as the active printer.
4Click [Print] or [OK].
LThe [Send a Fax] dialog box will appear.
5Enter the fax...