Panasonic Hx Wa10 Owners Manual

							VQT3P3571
BASIC OPERATION/PLAYBACK
PLAYBACK
BASIC OPERATION/PLAYBACK
PLAYING BACK VIDEOS AND 
PHOTOS
1 Set the camera to the playback mode (page 47).
2 Select the image to play back.
hUse the arrow keys to move 
the yellow frame to the file 
you wish to play back.
h The image information for the 
framed image is shown at the 
bottom of the LCD monitor.
3 Press the SET button.
hThe image you selected in 
step  2 is displayed on the 
LCD monitor.
h If a video was selected, 
playback begins.

Press [ J].
HINT
i Photos can be rotated when they 
are played back (pages 56 and 
101).
i If you close the monitor unit, 
playback stops and the camera 
switches to the standby mode.
SET1080-60i100-0006
00:00:05
DEC.20.2011         6:41 PM
10.5MB 
ENTER
Yellow frame
SET buttonArrow keys
Image 
information 
						

							72VQT3P35
BASIC OPERATION/PLAYBACK
Video playback operation
To do this...Do this
Normal forward playback Press the SET button. Stop playback During playback, press [ J].
Pause During playback, press the SET button or 
press [
I].
During accelerated playback, press [ I].
To play back  one image  at a time (single-
frame step) During forward 
playback After pausing playback, press [
H].
During reverse  playback After pausing playback, press [
G].
Slow 
playback During forward 
playback After pausing playback, press and hold [
H].
During reverse  playback After pausing playback, press and hold [
G].
To  
accelerate  playback Forward 
playback 
(Maximum 
15×) During forward playback, press [
H].
h
The forward playback speed changes each 
time [ H ] is pressed.
Press [ G] to resume normal playback speed.
Reverse 
playback 
(Maximum  15×) During forward playback, press [
G].
h The reverse playback speed changes each 
time [ G] is pressed.
Press [ H] to resume normal playback speed.
Return to normal playback  speed Press the SET button.
Vo l u m e  
adjustment Louder
During playback, push the zoom switch toward 
the [T/
]] side.
Softer During playback, push the zoom switch toward 
the [W/
P] side. 
						

							VQT3P3573
BASIC OPERATION/PLAYBACK
HINT
If the   appears on the Playback Screen...i The   icon appears when playing back a file that was saved in 
segments (page 192). 
						

							74VQT3P35
BASIC OPERATION/PLAYBACK
How to save one frame from a video as a photo
1 Play back the video. Pause the playback at the point you wish to 
“snap” a photo.
2 Press the [O] button.
h The screen to select the aspect ratio of the photo appears. Select the 
desired aspect ratio, and press the SET button. Note, however, that if 
the video aspect ratio is 4:3, you cannot select 16:9.
h The latest image number is assigned to the photo when it is saved.
HINT
The file size for a video is very large
i Therefore, be aware that if the video is uploaded to a computer to be 
played back, the computer may not be able to play back the video fast 
enough, making it appear jerky. (The video will always be displayed 
properly on the camera LCD monitor or a television.)
If no audio is heard...
i The audio is not played back when the video is played back in the frame-
by-frame, slow-motion, fast playback or reverse playback mode. 
						

							VQT3P3575
BASIC OPERATION/PLAYBACK
DELETING FILES
Deleted files cannot be restored, so delete files only after carefully checking 
the contents.
Delete single/delete all/delete folder
1 Display the Playback Menu 1 
(page 48), select the delete 
setting, and press the SET 
button.
DELETE SINGLE:
Deletes one file at a time.
DELETE SELECTED:
Deletes the selected files  
(page 76).
DELETE ALL:
Deletes all files.
DELETE FOLDER:
Delete the folder and all the files in the folder.
2 Select the desired delete mode, and press the SET button.
hThe Delete Confirmation Screen appears.

h Press [ G] or [H ] to select the file you wish to delete.
h There is no confirmation screen when deleting single files. 
Please make sure that the displayed image is one you wish to 
delete.

h Press [ G] or [H ] to confirm the files to delete.

h Press [ I] or [J ] to select the folder you wish to delete, and press the 
SET button.
SET
    
      DELETE
DELETE SINGLE
DELETE SELECTED
DELETE ALL
DELETE FOLDER
ENTER 
						

							76VQT3P35
BASIC OPERATION/PLAYBACK
3 Select [DELETE], and press the SET button.

hThe currently displayed file is deleted.
h To delete other files, select the files, select [DELETE] and press the 
SET button.

h The Delete Confirmation Screen again appears. To delete the files, 
select [YES] and press the SET button. If [DELETE FOLDER] was 
selected, select [YES] again and press the SET button, and the files 
will be deleted.
Delete selected
Delete selected files.
1 Display the Playback Menu 1 (page 48), select the delete setting, and 
press the SET button.
2 Select [DELETE SELECTED], and 
press the SET button.
hThe screen to select files to 
delete appears.
3 Select an image you wish to delete.
hUse the arrow keys to move the yellow frame to the file you wish to 
delete.
SET1080-60i100-0006
00:00:25 DEC.20.2011         2:25 PM
OK51.6MBDELETE 
						

							VQT3P3577
BASIC OPERATION/PLAYBACK
4 Press the SET button.
hThe selected file is marked with the delete icon [ >].
h Up to 100 files can be selected.
h To cancel a delete selection and remove the delete icon from a file, 
move the yellow frame to the marked file and press the SET button.
5 Press the [ O] button or [ @] button.
h The Delete Confirmation Screen appears.
6 Select [YES], and press the SET button.
hThe selected files are deleted.
HINT
i Files that are protected from accidental delete cannot be deleted. To delete 
protected files, set the protect setting for the files to off (page 99), and then 
follow the file delete procedure. 
						

							78VQT3P35
BASIC OPERATION/PLAYBACK
PLAYBACK MODES
21-image display playback
1 Display the image you wish to play back.
hThe 8-image display appears.
2 Push the zoom switch toward the 
[W/ P ] side.
h The 21-image display appears.
h While the 21-image display is 
shown, you can push the zoom 
switch toward the [T/ ]] side to 
change to the 8-image display, 
and push it again toward the [T/
] ] side to change to the single-
image display.
3 Select the image to play back.
h Use the arrow keys to move the yellow frame to the desired image, 
and press the SET button.
h If the zoom switch is pushed toward the [W/ P] side while the 21-
image display is shown, the display changes to the screen to select 
the playback folder (page 127).
HINT
Photo playback:
In step 2 , press the SET button to display the selected photo on the LCD 
monitor.
Video playback:
In step 2 , press the SET button to play the selected video.
DEC.20.2011  2:25 PM      100-0021 
						

							VQT3P3579
BASIC OPERATION/PLAYBACK
Magnifying (zooming in) the image (photos only)
1 Display a photo.
2 Push the zoom switch toward the 
[T/] ] side.
h Magnification is enabled.
h The image is magnified, and the 
central portion of image is 
displayed.
h For a photo that was captured 
with the face tracking function 
enabled (page 92), the detected 
face is in the center of the 
magnified image.
h Use the arrow keys to view 
different parts of the magnified 
image.
To magnify:
Magnification increases each time the 
zoom switch is pushed toward the [T/
] ] side.
To return to normal size:
Magnification decreases each time 
the zoom switch is pushed toward the 
[W/P ] side.
h Press the SET button to return to the 
normal (100%) view.
HINT
The magnified portion of the image can be saved as a separate image
i Press the [ O] button. The magnified portion is saved as a new photo.
i The image size of the saved photo of the magnified portion will be smaller 
than that of the original photo.
SET
105%
100%
100%100%
SAVE
Move
M o v eMove 
						

							80VQT3P35
ADVANCED OPERATION/SHOOTING
ADVANCED OPERATION
SHOOTING
ADVANCED OPERATION/SHOOTING
RECORDING MENU 1
To access and use the Menu Screen, see page 48 to 49.
Recording mode setting (page 50)
When recording a video, smoother motion and better image clarity can be 
achieved by a higher pixel rate (resolution) and a faster frame rate. However, 
the file size will also be proportionately larger, requiring longer times to edit 
and store (page 57). It is recommended that you adjust the settings to those 
suitable for the desired purpose. Note that this menu is also used for 
recording audio only files.
HINT
About recording in the   modei Use this mode when using a Mac computer for playing back and editing.
When editing videos... i In order for videos to be spliced, they must have been recorded in the 
same mode.
i Videos that were recorded in different modes cannot be spliced.
Playback of a video that was recorded in the   mode. i In some cases it may not be possible to play back videos recorded in this 
mode even on other devices equipped with this mode.
About the compatibility of recorded videos i This unit does not support non-MP4-compatible devices. Playback is not 
possible on devices that are not MP4 compatible, so please check the 
user’s manual for your device to confirm its compatibility.
i In some cases, playback may not be possible on an MP4-compatible 
device. In this case , please use the camera for playback.
Concerning recordable time and image quality i See page 191.