Panasonic Hx Wa10 Owners Manual

							VQT3P35101
ADVANCED OPERATION/PLAYBACK
Rotate (page 56)
Captured photos can be rotated to the correct orientation for viewing.
HINTi An image for which the protect mode has been enabled cannot be rotated. 
To rotate a protected image, cancel the protect mode before beginning the 
rotate image procedure (page 99).
Resize (page 56)
A captured image can be resized to a smaller size and saved as a separate 
image.
You can set the size to 1600×1200 pixels or 640×480 pixels.
The latest image number is assigned to the photo when it is saved.
HINT
Why can’t the image be resized?
i An image can be resized only to a smaller (or the same) size, not to a 
larger size. 
						

							102VQT3P35
ADVANCED OPERATION/PLAYBACK
PLAYBACK MENU 2
To access and use the Menu Screen, see page 48 to 49.
Correcting red-eye (page 57)
Repair the red-eye effect in photos to make the eyes appear more natural.
In the case of [SAVE AS NEW], the latest image number is assigned to the 
photo when it is saved.
HINT
If the “Red-eye correction not successful” message appears...i The camera was not able to successfully repair the image.
i
The correction function works to automatically edit flaws that the camera 
detects in captured images. In some ca ses, the camera may fail to correctly 
repair a flaw. 
						

							VQT3P35103
ADVANCED OPERATION/PLAYBACK
Editing videos (page 57)
You can trim away unwanted portions from a video and save it as a new video 
(video trimming [extracting]). You can also join videos together and save them 
as one separate clip (“splicing”).
Procedure to trim (extract) a portion of a video
J
Extract the specified portion.
12
ABC
Specify the frames 
( 1 , 2 ) where the 
video is to be split.
[Two ways to split the 
video] i Tr i m  a w a y  p o r t i o n s  
A and  C, and save 
portion  B.
i The original 
video is not 
affected.
(You can also choose to erase the original video when the new is saved.)
i
Delete portion  B, 
and join portions  A 
and  C. 
						

							104VQT3P35
ADVANCED OPERATION/PLAYBACK
Procedure to splice videos
When editing videos...
iWhen editing videos, do not turn off the camera, as doing so may erase 
the original video.
i As the number or size of the videos increases, the card memory may 
become full, making it impossible to edit or save the videos. In this case, 
you will need to free some of the memory on the card by deleting files that 
are no longer necessary (pages 56 and 75). Specify the video that will come first.
J
J
Splice the videos.
Specify the video clip that you wish to 
append (splice).
i The videos are spliced.
i
The original videos are not affected. 
(You can also choose to erase the 
original videos when the new video is 
saved.) 
						

							VQT3P35105
ADVANCED OPERATION/PLAYBACK
Video trimming (extracting)
1 Select the video to be trimmed from the 8-image display.
hMove the yellow frame to the video you wish to trim (page 71).
2 Display the Playback Menu 2 
(page 48), select [EDIT VIDEO], 
and press the SET button.
3 Select [SPLIT] and press the SET 
button.
hThe Split Screen appears.
SET
EDIT VIDEO
SPLIT
SPLICE ENTER
00:00:10SPLIT
SAVE
Start point 
						

							106VQT3P35
ADVANCED OPERATION/PLAYBACK
4 Specify the start point of the extract.
hPlay the video until approximately the desired point, pause the video 
then play the video one frame at a time, stopping at the start point of 
the extract. This will be the first frame of the extract.
h If the start point of the video is also the start point of the extract, 
proceed to step 5.
 Play:
After pausing playback, press and hold [ H] for about 2 seconds for 
forward playback, or [ G] for reverse playback.
Pause:
During playback, press the SET button.
Accelerated playback:
During playback, press [ G] or [ H] to change the playback speed.
Single frame:
After pausing playback, press [ H] to move forward one frame, or [ G] 
to move back one frame. 
						

							VQT3P35107
ADVANCED OPERATION/PLAYBACK
5 Press [I].
h The start point of the video 
extract is set, and the screen to 
specify the end point appears.
h Specify the end point of the 
extract by following the same 
procedure as in step 4.

1 Press [ J].
h Each time [ J] is pressed, the 
sections to delete and the 
sections to save are 
reversed.
2 Specify the end point of the 
extract. The frame following the 
end point of the extract will be 
the start point of the latter portion 
to be joined.
6 Press the [ O] button or [ @] 
button.
h A screen appears for you to 
select either to save the edited 
video as a new (separate) file, or 
to delete the original video and 
replace it with the edited video.
SAVE AS NEW:
The edited video will be saved as 
a new file. The original video 
remains unchanged.
OVERWRITE:
The original video will be deleted. 
Only the edited video will be 
saved.
REVIEW CLIP:
Play back the edited video before 
saving it.
00:00:06
SAVE
SPLIT
End point
Portion to be deleted (Black) Approximate playback time
SET
SPLIT
REVIEW CLIP OVERWRITE SAVE AS NEW ENTER 
						

							108VQT3P35
ADVANCED OPERATION/PLAYBACK
7 Select the desired option, and press the SET button.
h Editing starts.
h When editing videos, do not turn off the camera, as doing so may 
erase the original video.
h When editing ends, you are returned to the Playback Menu.
HINT
i You will not be able to overwrite the file  if the original file is protected.
i If the “CARD FULL.” or “Built-in Memory full.” message appears, you will 
need to free some of the memory by deleting files that you do not need to 
keep.
i Audio files cannot be trimmed.
Playback volume? i Adjust the volume before beginning editing (page 72).
In case of prolonged recording... i During the editing of lengthy videos, the time to process the large amount 
of data can become quite long. To avoi d problems caused by the battery 
pack becoming depleted in the middle of video editing, before starting to 
edit be sure that a sufficiently charged battery pack is installed in the 
camera, or connect the AC adaptor.
i It is recommended that a computer (HD Writer VE 1.0) be used to edit long 
videos.
i Videos shorter than 1 second cannot be edited. 
						

							VQT3P35109
ADVANCED OPERATION/PLAYBACK
Splicing (joining) videos
HINTi Videos that were recorded in different modes cannot be spliced.
1 Display the Playback Menu 2 
(page 48), select [EDIT VIDEO], 
and press the SET button.
2 Select [SPLICE] and press the 
SET button.
h The 8-image playback display for 
videos appears.
3 Move the yellow frame to the 
video you wish to splice, and 
press the SET button.
hThe specified video is labeled 
with a number.
h Up to 9 videos can be selected.
h The splice order follows the 
order in which the numbers are 
assigned.
h To cancel a selection and 
remove the number label from a 
video, select the video and press 
the SET button.
SET
EDIT VIDEO
SPLIT
SPLICE ENTER
     DEC.20.2011  8:53 PM
                     1080-60iSETOK
100-0016 00:00:05
SAVE
     DEC.20.2011         
SETUNLOCKSAVE
8:53 PM 100-0016
00:00:05 00:00:051080-60i
1
Assigned number
Approx. playback time 
						

							110VQT3P35
ADVANCED OPERATION/PLAYBACK
4 Press the [O] button or [ @] 
button.
h A screen appears for you to 
select either to save the spliced 
video as a new (separate) file, or 
to delete the original videos and 
replace them with the joined 
video.
SAVE AS NEW:
The spliced video clip will be saved 
as a new file. The original videos 
remain unchanged.
OV ERWRITE :
The original videos will be deleted. 
Only the joined video will be saved.
REVIEW CLIP:
Play back the spliced video before 
saving it.
5 Select the desired option,  and press the SET button.
h Editing starts.
h When editing videos, do not turn off the camera, as doing so may 
erase the original video.
h When editing ends, you are returned to the Playback Menu.
SET
SPLICE
SAVE AS NEW
OVERWRITE
REVIEW CLIP ENTER