Panasonic Hdc Hs700 Operating Instructions

41VQT2M75
Basic
Recording/
Playback
6
Motion picture/Still 
picture playback
1Change the mode to  .
2Touch the play mode select icon B.
3Touch the desired media to be played back motion pictures or still 
pictures.
4Touch the scene or the still picture to be 
played back.
≥Next (previous) page can be displayed by touching 
/. A
[VIDEO/SD CARD]
B [VIDEO/Built-inMemory]
C [PICTURE/SD CARD]
D [PICTURE/Built-inMemory]
E [VIDEO/SD CARD]
F [VIDEO/HDD]
G [PICTURE/SD CARD]
H [PICTURE/HDD]
≥Align with the status...

42VQT2M75
5Select the playback operation by touching the operation icon.
∫ Play back 1080/60p recorded scenes ( l58)
≥Change the mode to   and touch the play mode select icon.
Touch [SELECT VIDEO].≥The motion picture media switches between 
normal and 1080/60p recorded scenes each 
time [SELECT VIDEO] is touched. A
Operation icon
≥ Touch 
/ to display/not-display the operation 
icon.
Motion picture playbackStill picture playback
1/ ;: Playback/Pause
6 : Rewind playback
5 : Fast forward playback
∫ : Stops...

43VQT2M75
∫Change the thumbnail display
While the thumbnail is displayed, the 
thumbnail display changes in the following 
order if the zoom lever or adjust zoom 
buttons are operated to   side or   
side.
20 scenes  () 9 scenes  () 1 scene
()  Highlight&Time frame index* ( l88)
* Highlight&Time frame index can only set  in Motion Picture Playback Mode.
≥ 9 scenes display returns if the power is 
turned off or the mode is changed.
≥ When the thumbnail display is changed to 
1 scene during motion picture...

44VQT2M75
Basic
Setup
1
Using the menu screen
1Press the MENU button.
2Touch the top menu A.
3Touch the submenu B.
≥Next (previous) page can be displayed by 
touching / .
4Touch the desired item to enter 
the setting.
5Touch [EXIT] or press the 
MENU button to exit the menu 
setting.
∫ About  guide display
After touching  , touching the submenus 
and items will cause func tion descriptions 
and settings confirmation messages to 
appear.
≥ After the messages have been displayed, 
the guide display is...

45VQT2M75
This allows quick setting of some of the 
menus.
1Press the Q.MENU button.The following menus can be set. 
Touch the desired menu.
≥The items displayed differ depending on 
the position of the mode dial or settings.
2Touch the desired item to enter 
the setting.
3Touch [EXIT] or press Q.MENU 
button to exit the quick menu.
Using the quick menu
IconFunctionPage
[REC MODE]l 66
[TIME LAPSE 
REC] l
67
/ [PICTURE SIZE]
l78
[DISPLAY] l46
[POWER LCD] l49
[GUIDE LINES] l63
[MIC LEVEL]l74
[MF ASSIST]...

46VQT2M75
Basic
Setup
2
Using the Setup Menu
≥The items displayed differ depending on the position or settings of the mode dial.
Select the menu.
The screen indications are selected as 
shown in the illustration.
≥It is possible to set from the quick menu. 
(l 45)
Please refer to page 32.
It is possible to display and record the time at the travel destination by selecting your home 
region and the travel destination.
1 Touch [SET WORLD TIME].≥ If the clock is not set, adjust the clock to the current...

47VQT2M75
≥When the home region is set for the first time, the screen for selecting home/travel 
destination appears after setting the home region successively. If the home region has 
already been set once, execute the menu operation for Step 1.
5(Only when setting the region of your 
travel destination)
Touch  /  to select your travel 
destination and touch [ENTER].
≥Touch [SUMMER TIME SET] to set 
daylight saving time.   appears and 
the summer time setting is turned on. 
The clock and time difference...

48VQT2M75
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened 
or the viewfinder is extended.
≥When in Quick start standby mode about 80% of the power used in Recording pause 
mode is being consumed, so the recording time will be reduced.
≥ Start time will not be shortened if there is no SD card inserted.
Start time will be shortened if the [Built-i nMemory] is selected in the [MEDIA SELECT], 
even if there is no SD card inserted.
Start time will be shortened if...

49VQT2M75
The recording lamp lights up during recording and flashes when the unit receives a signal 
from the remote control or when the Self-timer is counting down. When this is set to [OFF], it 
does not light during recording.
Touch screen operation, starting and stopping of recording and power on/off can be 
confirmed with this sound.(Volume low)/ (Volume high)
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. ( l133)
This makes it easier to view the LCD monitor in...

50VQT2M75
It adjusts the brightness of the viewfinder.
≥These settings will not affect  the images actually recorded.
1 Extend the viewfinder and open the LCD 
monitor.
2Touch [
EVF SET].≥ The viewfinder turns on.3 Touch  /  to adjust the setting.≥Adjust while checking the picture in the viewfinder.4 Touch [ENTER].≥Touch [EXIT] or press the MENU button to complete the setting.
Please refer to page 104.
Please refer to page 104.
Please refer to page 104.
Please refer to page 105.
Please refer to page...