Panasonic Hdc Hs700 Operating Instructions

51VQT2M75
Please be aware that if a medium is formatted, then all the data recorded on the medium will be 
erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l109, 117)1 Touch [FORMAT MEDIA].
2
Touch [SD CARD] or 
[Built-inMemory].Touch [SD CARD] or [HDD].
≥ When formatting is complete, touch [EXIT] to exit the message screen.
≥ Perform a physical formatting of the SD card when the SD card is to be disposed/ 
transferred. ( l144)
≥ Perform a physical formatting of the built-in...

52VQT2M75
This item is used to start the unit demonstration.
(Only when the mode is at the   or   position)
If [DEMO MODE] is switched to [ON] when there is no SD card inserted and while this unit is 
connected to the AC adaptor, the demonstration automatically starts.
If any operation takes place, the demonstration is canceled. However if no operations take 
place for approx. 10 minutes, the demonstration automatically starts again. To stop the 
demonstration, set [DEMO MODE] to [OFF] or insert an SD...

53VQT2M75
Basic
Setup
3
Using with the remote 
control
Select the menu.
1 Power on/off button [ ]
Power can be turned on/off when the LCD 
monitor is opened or the viewfinder is 
extended.
≥Power cannot be turned on by the power 
on/off button when 36 hours have passed 
after the power is turned off. Press the 
power button on the unit and turn the 
power back on.
≥ Power cannot be turned off when it is 
connected to the PC or the DVD burner.
2 Photoshot button [ ]
*
3 On-screen display button 
[EXT...

54VQT2M75
∫Remote control usable range
A Remote control sensor
Distance: Within approx. 5 m (16 feet)
Angle: Approx. 10 o up and 15 o down, left, 
and right
≥ The remote control is intended for indoor 
operation. Outdoors or under strong light, 
the unit may not operate properly even 
within the usable ranges.
1Press a direction button.
≥Selected item will become yellow.
2Select the item with the 
direction button.
3Confirm the selection by 
pressing the OK button.
≥Selection/confirmation of operation...

55VQT2M75
Advanced
Recording 
(Advanced)
1
Zoom in/out function
The maximum optical zoom ratio is 12k.
The default setting of the [ZOOM MODE] is [i.Zoom 18 k]. It can be extended to a maximum 
of 18k  during Motion Picture Recording Mode. ( l66)
¬ Change the mode to   or  .
Zoom operation can be done using the multi 
manual ring.
Zoom by rotating the ring.
≥The zoom speed varies depending on the 
speed to rotate the ring. If the number of the recording pixels is set to 
anything other than the maximum...

56VQT2M75
Advanced
Recording 
(Advanced)
2
Optical Image Stabilizer 
Function
Optical Image Stabilizer can stabilize the image without decreasing the image quality as much.¬Change the mode to   or  .
∫ Changing the Optical Image Stabilizer function when in Still Picture 
Recording Mode
[MODE1]:
The function works all the time.
[MODE2]:
The function works when the   button is pressed. We recommend you are recording 
yourself or recording with a tripod in Still Picture Recording Mode.
≥When in [MODE1],  /...

57VQT2M75
Advanced
Recording 
(Advanced)
3
AF/AE tracking
It is possible to set the focus and exposure to the subject specified on the touch screen.
The focus and exposure will keep following the subject automatically even if it moves. 
(Dynamic tracking)
¬Change the mode to   or  .
1Touch .
≥  will be displayed on the screen.
≥ When [FACE RECOG.] ( l68) is [ON] and 
a registered face is detected, the target is 
automatically locked.
2Touch the object and lock the 
target.
A Target frame
≥ When you touch...

58VQT2M75
Advanced
Recording 
(Advanced)
4
1080/60p recording
This is a 1080/60p (1920k1080/60 progressive) recording mode that can record in maximum 
quality*.
* This means the highest quality for this unit.
¬ Change the mode to .
≥Please refer to page 147 for details about approximate recordable time.
1080/60p
≥The scenes recorded in 1080/60p can be saved or played back by this unit or the 
HD Writer AE 2.1.
1080
60p1080/60p button
To set to 1080/60p recording mode, press 
and hold the button until...

59VQT2M75
Advanced
Recording 
(Advanced)
5
Recording functions of 
operation icons
Select the operation icons to add different effects to the images to be recorded.¬Change the mode to   or  .
1Touch   to display the 
operation icons on the screen.
≥Touch  1 at the bottom right of the screen 
to change the page and touch  /  to 
display/not-display the operation icon.
2(e.g. Backlight compensation)
Select an operation icon.
≥ Select the operation icon again to cancel 
the function.
≥ Refer to the...

60VQT2M75
When you start recording, the image/audio gradually 
appears. (Fade in)
When you pause recording, the image/audio gradually 
disappears. (Fade out)
≥The Fade setting is canceled when the recording stops.
∫ To select the color for Fade in/out
: [RECORD SETUP]  # [FADE COLOR]  # 
[WHITE] or [BLACK]
≥ The thumbnails of scenes recorded using fade in become black (or white).
This brightens parts that are in shadow and difficult to see and suppresses white saturation 
in bright parts at the same...