Panasonic Hdc Hs700 Operating Instructions

71VQT2M75
When a registered person is detected by face recognition during recording, the name 
registered for that person is displayed.
≥Change the mode to   or  .
≥Displayed name will disappear after a while.
≥ It is displayed according to the registration order setting from the first person.
≥ This function is not displayed during the face-to-face recording or Playback Mode.
Detected faces appear with frames.
≥ Change the mode to   or  .
≥
Up to 15 frames are indicated. Larger faces and faces nearer to...

72VQT2M75
You can record bright pictures even in dark places by slowing the shutter speed.
≥Change the mode to  .
≥ Switch to Manual Mode. ( l82)
≥ The shutter speed is set to 1/30 or more depending on the surrounding brightness.
≥This function cannot be used in Still Picture Recording Mode.
≥ When the shutter speed becomes 1/30, the screen may be seen as if frames are missed 
and afterimages may appear.
Recording motion pictures with mo re vivid colors, using x.v.Color
™ technology.
≥ Change the mode to...

73VQT2M75
This will reduce the wind noise coming into the built-in microphones while maintaining the 
realism.
≥ Change the mode to  .
≥ Switch to Manual Mode. ( l82)
≥When switching to Intelligent Auto Mode, [WIND NOISE CANCELER] is set to [ON], and the 
setting cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
≥ If wind sound cannot be reduced with the Wind noise canceler function alone, set [BASS 
SETTING] to [LOWCUT]. ( l75)
Recording setting of the built-in...

74VQT2M75
When recording, the input level from the built-in microphones and the external microphone 
terminal can be adjusted.
≥Change the mode to  .
≥ Switch to Manual Mode. ( l82)
1 Select the menu.
≥It is possible to select the setting  from the quick menu in Manual Mode. ( l45) The 
microphone level returns to the setting adjusted previously, and it cannot be set from the 
quick menu.
2 Touch  /  to adjust the microphone input  level.
≥Touch   to activate/disactivate AGC. 
When AGC is activated, the...

75VQT2M75
Change the lower setting of the built-in microphone according to your choice.
≥Change the mode to  .
≥ Switch to Manual Mode. ( l82)
≥ Normally set to [0dB].
≥ Select [+3dB] or [+6dB] to get strong power feeling at bass level.
Adjust the quality of the image while recording.
Adjust by outputting to a TV while adjusting the quality of the image.
≥ Change the mode to   or  .
≥ Switch to Manual Mode. ( l82)
1 Select the menu.
2 Touch the desired setting items.
3 Touch  /  to adjust settings.
4...

76VQT2M75
Parts where white saturation (color saturation) is likely to 
occur (extremely brightly lit or shiny parts) are displayed with 
diagonal lines (zebra pattern).
≥Change the mode to   or  .
≥ Switch to Manual Mode. ( l82)
≥ You can record an image with little white saturation if you 
manually adjust the shutter speed or brightness (iris/gain) ( l84).
≥ The zebra pattern does not appear on the images actually recorded.
Displays the luminance level of the center of the screen (luminance display...

77VQT2M75
A graph with brightness as horizontal axis and number of pixels at that brightness as vertical 
axis is displayed. It is possible to determine the exposure of the whole image by looking at 
the distribution in the graph.
Adjust the brightness using [IRIS]. (l84)
≥ Change the mode to   or  .
≥ Switch to Manual Mode. ( l82)
≥Histogram is displayed while adjusting [IRI S] even if [DISPLAY] is set to [OFF].
[HISTOGRAM]
: [RECORD SETUP] # [HISTOGRAM] # desired setting
≥ It is possible to set from...

78VQT2M75
The higher the number of pixels, the higher the clarity of the picture when printing.
≥Change the mode to  .
≥ The number of recording pixels that can be set changes depending on selected screen 
aspect ratio. ( l79)
∫ Picture size and Maximum 
zoom ratio
* Extra optical zoom cannot be used. The 
maximum zoom magnification is 12 k.
∫ Picture size in Motion Picture 
Recording Mode
≥Change the mode to  .
≥This function’s default settings are   in Still Picture Recording Mode and   in Motion...

79VQT2M75
Selecting the picture quality.
≥Change the mode to   or  .
This allows you to select the aspect ratio of the pictures to suit printing or the playback method.≥Change the mode to  .
≥This functions default setting is [3:2].
≥ When the aspect ratio is set to [4:3] or [3:2], black bands may appear on the left and right 
of the screen.
≥ The edges of still pictures reco rded on this unit with a 16:9 aspect ratio may be cut at 
printing. Check the printer or photo studio before printing.
[QUALITY]
:...

80VQT2M75
Recording is done continuously at the rate of 60 still pictures per second.
Use this function to record an object with fast movement.
≥Change the mode to  .
1 Select the menu.
2 Press the   button.
≥  flashes in red during recording.
≥ First press the   button halfway, then 
press it fully to set the focus and record. It 
will automatically focus if you press fully 
once, so it is convenient when recording 
objects moving back and forth.
3 Touch [Record] or [Delete].
[Record]: Pictures are...