Panasonic Hdc Hs700 Operating Instructions

							41VQT2M75
Basic
Recording/
Playback
6
Motion picture/Still 
picture playback
1Change the mode to  .
2Touch the play mode select icon B.
3Touch the desired media to be played back motion pictures or still 
pictures.
4Touch the scene or the still picture to be 
played back.
≥Next (previous) page can be displayed by touching 
/. A
[VIDEO/SD CARD]
B [VIDEO/Built-inMemory]
C [PICTURE/SD CARD]
D [PICTURE/Built-inMemory]
E [VIDEO/SD CARD]
F [VIDEO/HDD]
G [PICTURE/SD CARD]
H [PICTURE/HDD]
≥Align with the status indicator  A.

 
 
\b
HDC-TM700&HS700P&PC-VQT2M75_mst.book  41 ページ  ２０１０年２月２３日　火曜日　午前１０時３４分 
						

							42VQT2M75
5Select the playback operation by touching the operation icon.
∫ Play back 1080/60p recorded scenes ( l58)
≥Change the mode to   and touch the play mode select icon.
Touch [SELECT VIDEO].≥The motion picture media switches between 
normal and 1080/60p recorded scenes each 
time [SELECT VIDEO] is touched. A
Operation icon
≥ Touch 
/ to display/not-display the operation 
icon.
Motion picture playbackStill picture playback
1/ ;: Playback/Pause
6 : Rewind playback
5 : Fast forward playback
∫ : Stops the playback and shows 
the thumbnails.
1: Displays the direct playback 
bar. (l87) 1/
;: Slide show (playback of the still 
pictures in numerical order) 
start/pause.
2; : Plays back the previous picture.
;1 : Plays back the next picture.
∫ : Stops the playback and shows 
the thumbnails.
F
0h00m00s 0h00m00s
0h00m00s

FF

A  appears.
HDC-TM700&HS700P&PC-VQT2M75_mst.book  42 ページ  ２０１０年２月２３日　火曜日　午前１０時３４分 
						

							43VQT2M75
∫Change the thumbnail display
While the thumbnail is displayed, the 
thumbnail display changes in the following 
order if the zoom lever or adjust zoom 
buttons are operated to   side or   
side.
20 scenes  () 9 scenes  () 1 scene
()  Highlight&Time frame index* ( l88)
* Highlight&Time frame index can only set  in Motion Picture Playback Mode.
≥ 9 scenes display returns if the power is 
turned off or the mode is changed.
≥ When the thumbnail display is changed to 
1 scene during motion picture playback, 
the recording date and time can be 
checked. Similarly, when the thumbnail 
display is changed to 1 still picture during 
still picture playback, the recording date 
and file number can be checked.
∫ Speaker/Headphone volume 
adjustment
Operate the volume lever or the adjust zoom 
buttons to adjust the speaker/headphone 
volume during motion picture playback.
To w a r d s  “ r”:
Increases the volume
To w a r d s  “ s”:
Decreases the volume
≥ Sound will be heard only during normal 
playback.
≥ If pause play is continued for 5 minutes, 
the screen returns to the thumbnails.
≥
The elapsed time for playback indication 
will be reset to “0h00m00s” for each scene.
Motion picture compatibilityPlease refer to page 58 about 
1080/60p.
≥This unit is based on the AVCHD format.≥ The video signal that can be played back on this unit is 1920 k1080/60i, 
1920k 1080/24p or 1440 k1080/60i.
≥ This unit may degrade or not play back motion pictures recorded or created on other 
products, and other products may degrade or not play back motion pictures recorded 
on this unit, even if the products support AVCHD.
Still picture compatibility
≥This unit is compliant with the unified standard DCF (Design rule for Camera File 
system) established by JEITA (Japan Elec tronics and Information Technology 
Industries Association).
≥
The file format of still pictures supported by this unit is JPEG. (Not all JPEG formatted 
files will be played back.)
≥ This unit may degrade or not play back still pictures recorded or created on other 
products and other products may degrade or not play back still pictures recorded on 
this unit.
HDC-TM700&HS700P&PC-VQT2M75_mst.book  43 ページ  ２０１０年２月２３日　火曜日　午前１０時３４分 
						

							44VQT2M75
Basic
Setup
1
Using the menu screen
1Press the MENU button.
2Touch the top menu A.
3Touch the submenu B.
≥Next (previous) page can be displayed by 
touching / .
4Touch the desired item to enter 
the setting.
5Touch [EXIT] or press the 
MENU button to exit the menu 
setting.
∫ About  guide display
After touching  , touching the submenus 
and items will cause func tion descriptions 
and settings confirmation messages to 
appear.
≥ After the messages have been displayed, 
the guide display is canceled.
HDC-TM700&HS700P&PC-VQT2M75_mst.book  44 ページ  ２０１０年２月２３日　火曜日　午前１０時３４分 
						

							45VQT2M75
This allows quick setting of some of the 
menus.
1Press the Q.MENU button.The following menus can be set. 
Touch the desired menu.
≥The items displayed differ depending on 
the position of the mode dial or settings.
2Touch the desired item to enter 
the setting.
3Touch [EXIT] or press Q.MENU 
button to exit the quick menu.
Using the quick menu
IconFunctionPage
[REC MODE]l 66
[TIME LAPSE 
REC] l
67
/ [PICTURE SIZE]
l78
[DISPLAY] l46
[POWER LCD] l49
[GUIDE LINES] l63
[MIC LEVEL]l74
[MF ASSIST] l85
[ZEBRA] l76
[LUMINANCE] l76
[HISTOGRAM] l77
14.2M13.3M
A
ON ON+A13.3M
HDC-TM700&HS700P&PC-VQT2M75_mst.book  45 ページ  ２０１０年２月２３日　火曜日　午前１０時３４分 
						

							46VQT2M75
Basic
Setup
2
Using the Setup Menu
≥The items displayed differ depending on the position or settings of the mode dial.
Select the menu.
The screen indications are selected as 
shown in the illustration.
≥It is possible to set from the quick menu. 
(l 45)
Please refer to page 32.
It is possible to display and record the time at the travel destination by selecting your home 
region and the travel destination.
1 Touch [SET WORLD TIME].≥ If the clock is not set, adjust the clock to the current time. ( l32)
≥ When the [HOME] (your home region) is not set, the message appears. Touch [ENTER] 
and proceed to Step 3.
2(Only when setting your home region)To u c h  [ H O M E ] .≥Touch [ENTER].3(Only when setting your home region)Touch  /  to select your home 
region and touch [ENTER].
≥Touch [SUMMER TIME SET] to set daylight 
saving time.   appears and the 
summer time setting is turned on; the time 
difference from GMT is set forward by one 
hour. Touch [SUMMER TIME SET] again to 
return to the normal time setting.
4(Only when setting the region of your travel 
destination)
Touch [DESTINATION].≥Touch [ENTER]. : [SETUP] 
# desired setting
[DISPLAY][OFF]/[ON]
[OFF] [ON]
NOV 15 2010NOV 15 2010
1h30mR 1h20mA
[CLOCK SET]
[SET WORLD TIME]


AThe current time
B The time difference from GMT 
(Greenwich Mean Time)
HDC-TM700&HS700P&PC-VQT2M75_mst.book  46 ページ  ２０１０年２月２３日　火曜日　午前１０時３４分 
						

							47VQT2M75
≥When the home region is set for the first time, the screen for selecting home/travel 
destination appears after setting the home region successively. If the home region has 
already been set once, execute the menu operation for Step 1.
5(Only when setting the region of your 
travel destination)
Touch  /  to select your travel 
destination and touch [ENTER].
≥Touch [SUMMER TIME SET] to set 
daylight saving time.   appears and 
the summer time setting is turned on. 
The clock and time difference from the 
home region time are set forward by one 
hour. Touch [SUMMER TIME SET] again 
to return to the normal time setting.
≥ Close the setting by pressing the MENU 
button.   appears and the time of the 
travel destination is indicated.
To return the display to the home settingSet the home region using Step 1 to 3, and close the setting by touching [EXIT] or pressing 
the MENU button.
≥If you cannot find your travel destination in the area shown on the screen, set it by using 
the time difference from your home region.
It is possible to change the date and time display mode.
≥ You can also show or change the date and time display by repeatedly pressing the DATE/
TIME button on the remote control.
It is possible to change the date format.
When about 5 minutes have passed without any operation, this unit automatically turns off to 
save battery life.
≥ The Power Save function will not activate when:
jconnected to AC adaptor
j using the USB cable for PC, DVD burner etc.
j PRE-REC is used
The unit is put into recording pause approx. 1 second when the power is turned on with the 
mode set to   or  .
≥ Depending on the recording cond itions, start time may be longer than 1 second in Still 
Picture Recording Mode.
≥ In the Quick power on mode, the zoom magnification becomes 1 k.
[DATE/TIME][OFF]/[D/T]/[DATE]
[DATE FORMAT][Y/M/D]/[M/D/Y]/[D/M/Y]
[ECONOMY][OFF]/[5 MINUTES]
[QUICK POWER ON][OFF]/[ON]


C The local time at the selected 
travel destination
D
The time difference between the 
travel destination and the home 
region
HDC-TM700&HS700P&PC-VQT2M75_mst.book  47 ページ  ２０１０年２月２３日　火曜日　午前１０時３４分 
						

							48VQT2M75
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened 
or the viewfinder is extended.
≥When in Quick start standby mode about 80% of the power used in Recording pause 
mode is being consumed, so the recording time will be reduced.
≥ Start time will not be shortened if there is no SD card inserted.
Start time will be shortened if the [Built-i nMemory] is selected in the [MEDIA SELECT], 
even if there is no SD card inserted.
Start time will be shortened if the [HDD] is selected in the [MEDIA SELECT], even if there 
is no SD card inserted.
≥ Change the mode to   or  .
1Set [QUICK START] to [ON].
2 Close the LCD monitor and retract the  viewfinder while the mode is set to   
or .
The status indicator  A flashes green and the unit 
goes into Quick start standby mode.
≥ The lens cover does not close.
3 Open the LCD monitor or extend 
the viewfinder.
The status indicator  A lights red and the 
unit is put into recording pause.
≥ Quick Start Standby Mode is canceled if
jabout 5 minutes have elapsed
j mode is set to 
≥ Time for Quick start will be more than 0.6 sec onds slower when the Digital cinema is used.
≥ Depending on the recording conditions, time for Quick Start may be more than 0.6 seconds 
slower in Still Picture Recording Mode.
≥ It may take some time for Automatic white balance to adjust.
≥ In the Quick Start Mode, the zoom magnification becomes 1 k.
≥ If [ECONOMY] ( l47) is set to [5 MINUTES] and the unit automatically goes into Quick 
Start Standby Mode, close the LCD monitor and viewfinder and then open the LCD monitor 
or extend the viewfinder again.
≥ Turn the unit off using the power button.
≥ Quick start standby mode cannot be released by the remote control.
Please refer to page 53.
[QUICK START][OFF]/[ON]
[REMOTE CONTROL][OFF]/[ON]
HDC-TM700&HS700P&PC-VQT2M75_mst.book  48 ページ  ２０１０年２月２３日　火曜日　午前１０時３４分 
						

							49VQT2M75
The recording lamp lights up during recording and flashes when the unit receives a signal 
from the remote control or when the Self-timer is counting down. When this is set to [OFF], it 
does not light during recording.
Touch screen operation, starting and stopping of recording and power on/off can be 
confirmed with this sound.(Volume low)/ (Volume high)
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. ( l133)
This makes it easier to view the LCD monitor in bright places including outdoors.
≥ These settings will not affect  the images actually recorded.
≥ It is possible to set from the quick menu. ( l45)
(Makes even brighter)/ (Makes brighter)/ (Normal)/ (Makes less bright)/ *(Automatic adjustment)
* It is not displayed in the Manual Mode or in the Playback Mode.
≥ When the AC adaptor is in use, the LCD monitor is set to   automatically.
≥ The recordable time will become shorter when  you use this unit with the LCD monitor lit up.
It adjusts brightness and color density on the LCD monitor.
≥ These settings will not affect  the images actually recorded.
1Touch [LCD SET].
2 Touch the desired setting item.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOR]:
Color level of the LCD monitor
3 Touch  /  to adjust settings.
4 Touch [ENTER].
≥ Touch [EXIT] or press the MENU button to exit the menu 
screen.
[REC LAMP][OFF]/[ON]
[ALERT SOUND][OFF]/ /
[POWER LCD]/// /
[LCD SET]
+2+10-1A
+2+10-1A
+1
ペペペ ２２２２年２月２２日　火火日　午午２２時２３分HDC-TM700&HS700P&PC-VQT2M75_mst.book  49     
						

							50VQT2M75
It adjusts the brightness of the viewfinder.
≥These settings will not affect  the images actually recorded.
1 Extend the viewfinder and open the LCD 
monitor.
2Touch [
EVF SET].≥ The viewfinder turns on.3 Touch  /  to adjust the setting.≥Adjust while checking the picture in the viewfinder.4 Touch [ENTER].≥Touch [EXIT] or press the MENU button to complete the setting.
Please refer to page 104.
Please refer to page 104.
Please refer to page 104.
Please refer to page 105.
Please refer to page 103.
Set to [YES] for changing the menu settings back to the default condition.
≥ Settings for [CLOCK SET], [MEDIA SELECT] and [LANGUAGE] will not be changed.
[EVF SET]
[AV MULTI][COMPONENT]/[AV OUT]
[COMPONENT OUT][480i]/[1080i]
[HDMI RESOLUTION][AUTO]/[1080p]/[1080i]/[480p]
[VIERA Link][OFF]/[ON]
[TV ASPECT][16:9]/[4:3]
[INITIAL SET]
HDC-TM700&HS700P&PC-VQT2M75_mst.book  50 ページ  ２０１０年２月２３日　火曜日　午前１０時３４分