Panasonic HD Projection Television Pt 47wxd63 Operating Instructions

							19 z
BASIC MENU NAVIGATION
ENGLISH
Basic Menu Navigation
MENU



  




  




  




  




  

P i c t u r eP i c M o d eS t a n d a r dC o l o r-3T i n t+1B r i g h t n e s sP i c t u r e0S h a r p n e s s+1N o r m a lO t h e r   A d j .+1
+1



  




  




  

MENUMENU
 EXIT
Press
Press
Pressto select Other 
Adj.to display the
Main Menu.
to select 
the desired 
icon.
sub Menu
Field
Press
Press
NORMAL PICTURE
Pressto enter the sub-
menu field.
Press to select desired 
sub-menu 
feature.
Note: For sub -menu with OTHER ADJ. Press to select desired
sub-menu.
Note: To EXIT menus.   
repeatedly until normal
Pressto access Other 
Adj. sub-menu. Press
to adjust or
set desired
sub-menu
feature.
Press
sub sub- Menu
Field
to adjust or
select desired
sub-menu.
orpicture is displayed. 
to return to normal
picture.
P9 0474 E  080403R.fm  Page 19  Wednesday, August 13, 2003  8:18 AM 
						

							20 z
MENU OPERATIONS
ENGLISH
Menu Operations
PICTURE
Note:While sub-menu features are  highlighted, press WVOL
or VOLX to adjust or activate. 
ˆPIC MODE - Lets you choose one of three pre-set
Picture Modes that best suits the program you are
viewing. Selecting this feature will also affect Color
Temperature setting.
• VIVID - This is the default mode, It provides
enhanced picture contrast and sharpness for
viewing in a well-lit room.
• STANDARD - Recommended for normal viewing
conditions with subdued room lighting.
• CINEMA - Select this mode for watching movies in
a darkened room. It provides a soft, film-like
picture.
Note:Each mode has its own picture settings (Color, Tint, Brightness,
Picture and Sharpness).
ˆCOLOR - Adjusts desired color intensity.
ˆTINT - Adjusts natural flesh tones.
ˆBRIGHTNESS - Adjusts dark areas of picture.
ˆPICTURE - Adjusts white areas of picture.
ˆSHARPNESS - Adjusts clarity of outline detail.
ˆNORMAL - Reset adjustments to factory default
settings.   
ˆOther Adjust
Highlight OTHER ADJ. and press OK button to display the
sub sub-menu.
Note:While sub sub-menu features are highlighted, press
WVOL or VOLX to select or activate.  
• COLOR TEMP (temperature) - To increase or decrease
WARM (red) and COOL (blue) colors to suit personal
preferences.  
• NATURAL COLOR - To increase the color reproduction
range with natural color gradation and highly delicate
hues.
• VIDEO NR - Reduces noise in the channel, commonly
called snow. 
• 3D Y/C FILTER - Minimizes noise and cross color in the
picture.
• COLOR MATRIX - Available only with 480p signal.
Select HD or SD to automatically adjust color
parameters for HD (high definition) and SD (standard
definition). This feature is not selectable when viewing
regular TV (NTSC) program. Note:When viewing a non-standard DTV signal
format, you can change color parameters
manually for the best picture quality.
• VM (VELOCITY MODULATION)-To increase picture
sharpness and provides crisp white to black transitions 
• FREEZE - This feature is used to freeze main picture
and display it in a PIP or SPLIT frame, when the
FREEZE button on the remote control is pressed. Press
FREEZE again to delete frame. 
Note:SWAP, SIZE, SEARCH, PIP MIN and PIP MAX buttons are not
functional in this mode.   
AUDIO
Note:While sub-menu features are  highlighted, press WVOL
or VOLX to adjust or activate. 
ˆBASS - Increase or decrease the bass response.
ˆTREBLE - Increase or decrease the treble response.
ˆBALANCE - Emphasize the left/right speaker volume.
ˆNORMAL - Reset BASS, TREBLE and BALANCE
adjustments to factory default settings.  
ˆOther Adjust
Note:While sub sub-menu features are highlighted, press VOL
X to adjust or activate. 
• AI SOUND - Equalize overall volume levels across all
channels. (AI sound is not available in VIDEO mode). 
• BBE
® - Sound technology enhances speech intelligibility
and restores the dynamic range of musical passages to
provide outstanding natural sound.
• BBE VIVA 3D -  BBE VIVA provides a musically accurate
natural 3D image with hi-fi sound. The clarity of the
sound is improved by BBE while the width, depth and
height of the sound image are expanded by BBEs
proprietary 3D sound processing. BBE VIVA is
compatible with all TV programs including news, music,
dramas, movies and sports as well as electronic games.
BBE VIVA enhances the surround sound effect, while
maintaining the clarity of dialogue.
Note:BBE VIVA 3D is only used in models PT-53TWD63 and
PT-56TWD63.
Picture
Color31Tint31
Pic ModeStandard
Picture53Brightness31
Sharpness31NormalSetOther Adjust
Other Adjust
Natural ColorOnVideo NROff
Color TempCool
Color MatrixSD3D Y/COff
VMOffFreezeSplit
Audio
Treble8
Balance31
NormalNo
Bass7
Other Adjust
OK
Other Adjust
AI SoundOff
BBE VIVA
BBE
Surround
Speakers
Off
Off
Off
HDMI In
On
Auto
P9 0474 E  080403R.fm  Page 20  Wednesday, August 13, 2003  8:18 AM 
						

							MENU OPERATIONS
21 z
ENGLISH
AUDIO (cont.)
ˆOther Adjust (cont.)
• SURROUND - Enhances audio response when listening
to stereo.
• SPEAKERS - This feature is used to turn TV speakers
ON or OFF.
• On - TV speakers operate normally.
• Off - TV speakers off. 
• HDMI In - When using HDMI, this feature will let you
switch between Analog Input and Digital Input.
• Auto - Automatically selects Analog / Digital signal.
• Digital - Digital Input only.
• Analog - Analog Input only.
CHANNEL
Favorite - Allows you to create Favorite channel list from
Antenna (A) or Antenna (B).
ˆSurf Mode - Select FAVORITE or ALL CHANNELS
with remote control 
WVOL or VOLX, then press the OK
button
.
ˆRF Input - Select Antenna (A) or Antenna (B). 
ˆChannel - Use the remote control 
WVOL or VOLX to
select desired channels, then press the OK button to
add. To delete channel, press OK again while channel
number is displayed.  
Captions - To enter preset and manual labels to desired
stations. Also to enter input label to video inputs. 
ˆPreset Labels - To enter channel numbers for popular
TV stations.
Procedure
• Press OK button while Preset Labels is selected to
select RF Input, then press WVOL or VOLX to
select Antenna (A) or Antenna (B). 
Note:Only input with signal will be selectable. 
•Press OK button to underline your selection.
• Press CH T to select desired preset caption.
• Then use the remote numeric keypad to select
desired channel (refer to your local TV guide).
• Press OK to enter the selection.   Note:To delete a channel number, while highlighted
press WVOL repeatedly until all numbers are
removed, then press OK button.
ˆManual Labels - To enter numbers and captions
manually.
Procedure
• Press OK button while Manual Labels is selected to
select RF Input, then press WVOL or VOLX to
select Antenna (A) or Antenna (B).
Note:Only input with signal will be selectable. 
•Press OK button to underline your selection.
• Press CH T to select Channel, then press WVOL
or VOLX to select available channel number.
• Press  CH T to select CAPTION.
• Press VOLX to select first character position, then
press CHS or CHT to select character (refer to
your local TV guide for labeling channels).
• Repeat until all characters are added, up to (7)
characters can be added for each channel. 
•Press OK button to underline your selection.
Note:To delete the Channel Caption, highlight the first
character and press CHS or CHT until no character is
displayed. Move to the next character and repeat the
process. After all characters have been deleted, press
OK to enter the choice.  
ˆInput Labels - To label video input connections for
onscreen display. 
Procedure
• Press OK button while Input Labels is selected to
select COMPONENT 1, then press WVOL or
VOLXto select preset INPUT LABEL for
component 1. 
• Press OK to underline your selection. 
• Press CHTto select another input, then repeat
procedure for adding more labels to inputs.
Note:
• To delete Input labels, select desired input, then
press WVOL or VOLX until no label is displayed.
• Press OK button to enter your selection.     
Favorite
Surf ModeFavoritesWX_______
RF InputAntenna (A)
Channel
A 1
The maximum is 16 favorite channels
Captions
Preset Labels
Manual Labels
Input Labels
NBCPBS
CNN
RF InputWAntenna A)XABC
CBSFOX
ESPNHBO
12-1
15-1
Captions
Preset LabelsManual LabelsInput LabelsRF input
Channel
Caption
W Antenna (A) X
15-1
CHANGE
Captions
Preset Labels
Manual Labels
Input Labels
Component 1
Component 2
HDMI
Video1
Video2
Video3
Video4WDBSX
SKIP
DVD
VCR
P9 0474 E  080403R.fm  Page 21  Wednesday, August 13, 2003  8:18 AM 
						

							22 z
MENU OPERATIONS
ENGLISH
Photo Viewer™ Operation
Photo Viewer™ lets you display JPEG images recorded by  digital
camera on SD card or other types of memory card when it is
inserted in the proper card slot.   
Notes:
• Photo Viewer™ can only show still images recorded by
Digital Still Camera with DCF and EXIF standard JPEG
file.
• Other types of Memory cards can be inserted into the
PCMCIA card slot by using the appropriate Card
adaptor.
• Memory cards are not supplied with this television.
Compatible memory cards that can be viewed with
Photo Viewer™
Inserting and Removing SD or PCMCIA card
WARNING: As with any small object, SD cards can be
swallowed by young children. Do not allow
children to handle the SD card. Please remove
the SD card immediately after use.
Procedure
ˆSD card - Push in the SD card into the SD card slot until it is
clicked in. Press again on the card to remove it.
ˆPCMCIA card - Push in the card firmly until it is seated. To
release the card, press the release button on the right side of
the card slot. Before inserting or removing the PCMCIA card,
make sure that the TV is turned Off. Otherwise, it may
damage the unit. Do not insert anything other than the
PCMCIA card.
Information Regarding memory cards
• Memory cards must be formatted with FAT12 or FAT16 in
order to be viewed on TV. If the card is not formatted, it may
cause incompatibility with certain memory card adaptors. If
this happens, reformat the card using your digital camera.
Refer to your camera manual for more information.
Note:Reformatting the card will erase the images stored in
it. 
Basic Operation
Insert either the SD card or the PCMCIA card into the appropriate
slot. The video disappears from the screen while the Photo
Viewer™ access the information from the card. After accessing
the images from the card, a thumbnail screen is displayed on-
screen. Use the navigation keys to select the desired thumbnailand press OK button to display the image on-screen. UseW VOL
or VOL X to select the previous or next picture. Press EXIT
button to exit Photo Viewer™ mode.
Photo Viewer™ - Thumbnail mode
The thumbnail screen is the initial entry screen from the main
menu. It shows the total number of images on the card, Filename
(folder number and the number of the thumbnail that is
highlighted), the date the picture was taken and the pixel
(resolution) of the picture.
Procedure
• Press MENU button to display the Main menu.
• Highlight Photo Viewer™ Icon using the navigation (Left/
Right/Up/Down) keys.
• Press OK button to display the thumbnail screen. 
 
Note:It may take long time to display the thumbnail if there are lots of
files or if the file size is big.
• Select the desired thumbnail image by using the 
Left/Right/Up/Down navigation keys.
• Press OK button to start the Single Picture View mode.
• Change the picture by pressing W VOL or VOL X keys.
• Rotate the picture if necessary, by using the CH T or 
CH S keys.
Notes:
• Maximum number of folders that can be displayed: 100.
• Maximum file size: 3000. Any folder of files larger than
the specified size, will not be displayed.
• Picture resolution: Compatible in the range 64x64 -
8192 x 8192 (sub-sampling 4:2:2 or 4:2:0)
• If the image is imported from a PC, it must follow the
EXIF (Exchangeable image file format) 2.0, 2.1, 2.2 in
addition to the DCF (design rule for Camera File system)
format, or it will not be displayed.
• If the JPEG is modified using a PC, it will not be
displayed on TV.
• The Photo Viewer™ cannot display Motion JPEG and
still image not DCF formatted (i.e. TIFF, BMP).
• If the file is partially corrupted, it may be shown in lower
resolution.
• If both SD card and PCMCIA card is inserted at the
same time, SD card has the priority. Otherwise, the card
inserted later will have priority.
• Do not remove the SD card or PCMCIA card while Photo
Viewer™ is accessing the information (when the card
icon is flashing). Such action may damage the memory
card or the unit itself.
Card typeMaximum Size
SD, MMC (Multi Media Card), 
Smart Media*, Compact Flash*
Memory Stick*, xD-Picture Card*
Flash ATA*, Memory Stick Pro*
*These cards require standard 
PCMCIA adaptor. (Some PC card 
adaptor will not be compatible).
Note: Photo Viewer™ is not 
compatible with card type hard disk 
(Micro Drive, Mobile type hard 
disk, etc.SD - 512MB, MMC - 64MB
Smart Media - 128MB, 
Compact Flash - 1 GB
Memory Stick - 128MB
xD-Picture Card - 128MB
Flash ATA - 128 MB
Memory Stick Pro - 1GB
POWERW VOLUME XMENU OK T CHANNEL STV/VIDEO
S-VIDEO VIDEO 4 L - AUDIO - R
SD Card slotPCMCIA card slot
P9 0474 E  080403R.fm  Page 22  Wednesday, August 13, 2003  8:18 AM 
						

							MENU OPERATIONS
23 z
ENGLISH
Photo Viewer™ Operations (Cont.)
Photo Viewer™ Setup Menu 
This menu allows you to customize features in the Photo
Viewer™ Setup menu. 
Procedure
• Highlight Photo Viewer™ icon and press OK button to
display the thumbnail screen.
• Press the SD button on the remote control to display the
Setup screen. 
•Use the CHTS, WVOL or VOL Xkeys to navigate in
the setup menu.   
ˆSlide Show - Allows you to start the slide show by pressing
the OK button while Start is highlighted. Press OK button to
stop the Slide Show.
Note:When you are in the Slide Show mode, you can change
the Aspect of the image on screen by pressing the
ASPECT button on the remote control.
ˆInterval - Allows you to change the length of time that a slide
is being displayed on screen. Available settings are: 5sec,
10sec, 15sec, 30sec, 60sec, 90sec and 10 minutes.  
ˆSequence - Select either Order or Random.
ˆRepeat - Select Off or On.
Note:After setting Interval, Sequence or Repeat, press CH S
button to select Start, then press OK to start the Slide
Show.
ˆRotate - Allows you to rotate the image.
ˆZoom - Lets you select the magnification of the Single Slide
display.
Procedure
• While in the Single Slide display mode, press SD button
to display Photo Viewer™ Setup Menu. Zoom option will
be displayed in the Setup Menu.
• Highlight Zoom and press OK button.
• Press WVOL or VOL X button to select To Fit, x2 or x4.
• Press OK button. To move the image in the picture
frame, press the navigation buttons.
• Press OK to view the slide in normal magnification.
ˆCard - Select either SD or PC when both cards are inserted in
the slots.Following are some of the error messages that may be displayed
on-screen when certain conditions are not met or exceeds the
Photo Viewer™ specifications.
Notes:
• If thumbnail screen or a single slide image is displayed
for longer than 10 minutes, Image shift (refer to page 26)
feature will be activated to prevent image retention. The
image on-screen will zoom-in and zoom-out in 4 (four)
steps.To exit this mode, press OK button or select
another slide or press any button. 
• During the Slide show, the Image shift feature will
activate if the image is displayed longer than 5 (five)
minutes. The image will be shifted horizontally (left or
right) in minute increments. Image shift feature will not
activate, if it is turned Off.
Setup MenuReturn
Interval5SecSequence Order
Slide Show Start
Repeat OFFRotate
LeftCard SD
100-001 0001/0066
S
T WX
EXIT SELECTCHANGEOK
: 07/04/2002
: 1600 x 2000 Date
Pixel
Error messages
Error conditionError messages displayed 
on-screen
When inserting CardNo card or Card is not inserted 
correctly
If the JPEG file is corrupted
and cannot be decoded.This type of image is not supported.
If the card is not formatted with
FAT 12 or FAT 16 or if it is not
DCF standard.This type of format is not supported.
If thumbnail and main picture 
cannot be shown 
Over 3000 image filesPhoto Viewer™ cannot support over 
3000 JPEG files.
Resolution overPhoto Viewer™ cannot support over 
8192 x 8192 pixels.
If incompatible card is insertedThis type of card is not supported.
Photo Viewer™ Troubleshooting
SymptomsSolutions
Cannot read the content of
the card
A) Not compatible format. Must be          
formatted with FAT 12 or FAT 16.
B) The extension is not “JPG”. 
Photo Viewer™ can display EXIF 
standard JPEG file, and JPEG 
file which is not EXIF standard 
cannot be shown. 
C) The folders not under DCF 
standard.
PC card cannot be ejectedPush the card all the way in, and 
eject.
Poor picture quality
If the main image cannot be read 
(the file is partially corrupted), the 
Photo viewer™ will read the 
thumbnail. Please confirm the 
format of the image.
Long time to displayIt will take long time to display, if 
there are lots of images or if the file 
size is big.
This icon will appear where 
thumbnail image will.
P9 0474 E  080403R.fm  Page 23  Wednesday, August 13, 2003  8:18 AM 
						

							24 z
MENU OPERATIONS
ENGLISH
Timer
This menu lets you set the sleep timer, Timer (On/Off), clock and
the day of the week.
ˆSleep - Select to turn the PTV off in 30, 60, or 90
minutes. Select No to turn the sleep timer off.
Procedure
• Press MENU button to display the Main Menu.
• Highlight the Timer icon using the navigation buttons.
• Press OK button to display the Timer menu.
•Press VOL X button to select 30, 60, 90 minutes or No.
 
ˆTimer  - Select timer to turn the PTV on and off at
selected times and on selected day. 
Procedure
• While in the Timer menu, press CH T button to highlight
Timer.
• Press OK button to display the Timer sub-menu.
• Press W VOL or VOL X button to select appropriate day
setting.
• Press CH T to highlight On Time.
• Press OK button to enter the time field. Press CH S or
CH T button to set the hour (AM or PM).
• Press VOL X and press CH S to set the minutes.
• After setting hour and minutes, press OK or MENU
button to quit the settings.
•Press CH T to highlight Off Time and repeat the same
procedure as for setting time.
• Press CH T to highlight Set and select Yes or No.
• Press EXIT button to exit the menus.
• Enter the desired channel number using the numeric
keypad and the PROG button (if necessary). The
television will tune to this channel when timer is
activated.• Turn Off the set. 
• The television will turn On at the selected time and the
channel will be the channel selected before turning the
TV off.
Notes:
• Clock must be set before you can set Timer. Use
navigation buttons to highlight the Timer Icon.
• The television automatically turns OFF after 90 minutes
when turned ON by the Timer. If the OFF time is selected
or if a key is pressed, the automatic OFF after 90
minutes will be cancelled. 
ˆClock Set - Select to set the Time of the day.
Procedure
• While in Timer menu, press CH T to highlight Clock Set
and press OK button.
• Press CH S or CH T button to set the hour (AM or PM).
• Press VOL X to enter the next field. Press CH S or 
CH T button to the minutes. Press MENU or OK to
return to the Timer screen.
ˆDay Set - Select to set the day of the week.
Procedure
• Press CH T to highlight Day Set and select the day of
the week using W VOL or VOL X button.
• Press EXIT button to quit the timer menu screen.
Timer
Sleep
Timer
Clock Set
Day Set
No
- - : - -- -
- - -
OKTimer
Timer
Clock Set10 : 10
AM
Day SetSun
Sleep30
Timer
DaySun
On Time10 : 10AM
Off Time12 : 10PM
SetYe s
OK
OKTimer
Sleep
Timer
Clock Set
Day Set
No
- - -
10 :00AM
Timer
Timer
SleepNo
Clock Set10 :00AM
Day SetSUN
P9 0474 E  080403R.fm  Page 24  Wednesday, August 13, 2003  8:18 AM 
						

							MENU OPERATIONS
25 z
ENGLISH
Set Up
This menu lets you select antenna, program channels,
select analog and digital closed caption, Convergence,
Auto Power On, Image Shift and Zoom Adjust.
Procedure
• Press MENU to display the Main Menu.
• Press TCH, CHS, W VOL or VOLX to select the
Setup icon.
• Press OK button to display the options in the Setup
menu.
Program CH
This menu allows you set up the antenna, auto scan all available
analog and digital channels, manually add or delete channels and
display the signal strength of the digital channels.
ˆInput Setup - Lets you specify Antenna mode (Cable
only, Cable/Antenna or Antenna only).
Note:You can connect either a Cable antenna or a terrestrial
antenna to Ant A. However, if you have both Cable signal
and terrestrial antenna signal, the Cable signal must be
connected to the Ant A input on the back of the
projection television. Connect the antenna signal to the
Ant B input.
Procedure
• In Set Up menu, select Program Channel and press OK.
• Press OK to enter sub-menu. Press W VOL or VOL X to
select Cable Only, Cable/Antenna or Antenna Only.
• Press OK button to enter your selection. When the next
screen will be displayed, press OK button to start the
Auto scan. Auto scan must be done when you select the
input signal for the first time or whenever you change the
antenna configuration. 
Notes:
• If Cable Only, Antenna Only or Antenna/Cable is
selected and DCM (Digital Cable Module) is not in, the
Auto scan will perform Scan All. • If Cable Only is selected and DCM is in, Auto scan will
be skipped.
• If Cable/Antenna is selected and DCM is in,  Antenna (B)
Analog & Digital Auto scan will be performed.
ˆAuto Scan - To automatically Scan All available
channels, Antenna (A) Analog, Antenna (A) Analog &
Digital, Antenna (B) Analog and Antenna (B) Analog &
Digital. 
Procedure
• Highlight Auto Scan and press OK to enter the sub
menu.
• Use T CH and CH S to select and press OK to start the
auto scan. After Auto Scan is completed press MENU to
return to the previous screen.  
ˆManual Program - To add or delete channels from
either channels list (A/B) manually.  
ˆSignal Meter - Displays the signal strength of the ATSC
digital channel in either Antenna (A) or Antenna (B).
Note:Signal meter feature is not available for analog channels.
Procedure
• Highlight Signal Meter and press OK button to enter the
sub-menu.
• In the RF Input field, select either Antenna (A) or
Antenna (B).
• Select the channel number using W VOL or VOL X
buttons.
• Press OK button to display the Signal Strength.  
Note:The color of the signal bar usually indicates the strength
of the received signal.
• Green - Adequate signal for a good reception.
• Yellow - Poor signal strength.
• Red - Very poor signal strength.
Program Channel
Input Setup
Manual Program
Signal Meter
Auto Scan
OK
Cable onlyWW
Connect Cable to Antenna (A)
Change your Input Setup
and press OK
Program Channel
Input Setup
Manual Program
Signal Meter
Auto Scan
OK
Connect Cable to Antenna (A)WWCable only
Auto scan is needed
press OK to start Auto Scan
Program Channel
Input Setup
Manual Program
Signal Meter
Scan AllAntenna (A) AnalogAntenna (A) Analog & DigitalAntenna (B) AnalogAntenna (A) Analog & Digital
Press OK to channel scan
all available channels
Auto Scan
OK
Program Channel
Input Setup
Manual Program
Signal Meter Auto Scan
RF InputChannel AddAntenna (A)
Channel DeleteA: 12T S
WXEXIT
MENU
to return SELECT
OK
Program Channel
Input SetupAuto ScanManual Program
Signal Meter
RF InputAntenna (A)________RF Channel3-1WX
Signal Strength: 70%Peak: : 75%
P9 0474 E  080403R.fm  Page 25  Wednesday, August 13, 2003  8:18 AM 
						

							26 z
MENU OPERATIONS
ENGLISH
Closed Caption
The HDTV Projection Television includes a built-in decoder
that is capable or providing a visual display of the audio
portion. The program viewed must provide Closed
Captioning (CC) for the television to display it. You can set
your preferences to both digital and analog Closed
Captioning.
CC Mode
Select Off, On or On Mute.
• Off - Use when Closed Captioning is not desired.
• On - To display Closed Captioning.
• On Mute - To display Closed Captioning when
audio is muted.
Analog
This option lets you choose the closed caption service you
desire.
Procedure
• In Closed Caption menu, highlight Analog and press OK
button to enter the sub-menu.
• Press W VOL or VOL X to select the desired setting:
CC1, CC2, CC3, CC4, T1, T2, T3 or T4.
• CC1 - For video related information that can be
displayed (up to 4 line of script on the screen, where it
does not disturb the relevant parts of the picture). Script
can be in any language.
• CC2 to CC4 - Other modes used for video related
information.
• T1 - Blanks out a large portion of the picture on the
television screen, and displays program guide or any
other information currently being transmitted.
• T2, T3 and T4 - Other modes that display information
and blank out a large portion of the picture of the
television screen.
• Press MENU button to return to the Closed Caption
menu.
Digital
The Digital Closed Captioning menu lets you configure the
way you choose to view the digital captioning. This menu
will let you choose the type of closed captioning service,
font type, font size, font style. The colors sub-menu lets you
set the color of the font (Foreground), color the text box
(Background) on which the closed caption is text is
displayed, the opacity of the font (Fore Opacity), the opacity
of the text box (Back Opacity), and the outline of the
dropshadow (if selected under style).Colors sub-menu
Procedure
• In digital closed captioning sub-menu, select Colors and
press OK button to display the colors sub-menu.
Note:When digital caption is used on ATSC, the monitor
output (Prog Out) will also output the CC information.
This means, if you tape the program, the CC information
will also be recorded on tape. To avoid this, either turn off
digital CC or turn on analog CC.
Other Adj.
The Other Adjust menu lets you set Auto Power On, adjust
Convergence, select Image Shift On or Off and Zoom
Adjust.
ˆAuto Power On - Select Set to power up the PTV at the
same time as the Cable box or other components or
select Off.
ˆImage Shift - This feature prevents the image retention
associated with viewing fixed image for extended
period of time. The image is shifted left or right in small
increments if a fixed image is left on for a long time.
Selecting On is recommended.
ˆConvergence - This feature is used to adjust the
convergence if needed.
ˆZoom Adjust - This feature lets you adjust the size of
the zoom picture and position it vertically.
Procedure
• In Set up menu, highlight Other Adj. and press OK
button to display the sub-menu.
• Use T CH or CH S to navigate. Press WVOL or
VOL X to select  or press OK button to display the sub-
menu for Convergence and Zoom Adjust.
ˆConvergence
Note: Only use the remote control buttons while adjusting
convergence. The front control panel navigation and
OK buttons have no effect.  
SettingOn
CC CC
CC Mode CC ModeAnalog AnalogDigital Digital
ForegroundGreen
CC CC
Fore Opacity Fore OpacityTranslucentBackground BackgroundWhiteBack Opacity Back OpacityOpaqueOutline Outline
Sample CC Text Sample CC Text
Black
Colors Colors
Set Up
Auto Power OnOffOff
Image Shift OnOn
Convergence
Zoom Adjust
S
T WX
EXIT
MENU
to return SELECT
CHANGE
Set Up
Auto Power OnOffOff
Image Shift OnOn
Convergence
Zoom Adjust
S
T WX
EXIT
MENU
to return SELECT
CHANGE
OK
P9 0474 E  080403R.fm  Page 26  Wednesday, August 13, 2003  8:18 AM 
						

							MENU OPERATIONS
27 z
ENGLISH
Convergence (cont.) 
Note:Convergence seldom needs adjusting except after
moving the PTV or to make minor adjustments. 
Procedure
• Press  OKto enter convergence  sub-menu field.
• Press  CHS or  CHT to select:
• CONVERGENCE ADJ. - Select to correct minor
convergence problem.
Note:After selecting,  pressOKto continue 
CONVERGENCE ADJ. 
• RESET TO DEFAULT - Select to set convergence
to factory default setting. 
Note:After selecting, press OKto activate RESET
TO DEFAULT feature.   
CONVERGENCE ADJ.
Procedure
• After pressing OKthe align Green to Center screen will
be displayed. 
• Then use the navigation buttons on the remote control
to align the horizontal and vertical green lines on screen,
with the cabinet reference marks on top center and left
center of cabinet, as shown below. 
• Press OK button to display red center correction screen. 
• Use the navigation buttons on the remote control to align
the red cross with the white cross pattern at the center of
the screen. 
Note:To prevent picture tube damage do not leave
test pattern on for an extended period of time.
• Then press “0” on the remote control keypad to display
the BLUE center correction screen, repeat procedure for
adjusting blue. If needed press “0” again to return to
RED correction screen.
Note:An adjusted cross pattern appears white with a minimum
of color protrusion. 
NINE POINT CONVERGENCE CORRECTION
Note:Remote Control must be in TV mode.
Procedure
• Press OK button to display red correction screen. 
• Press the 1 through 9 keypad buttons on the remote
control to select the desired convergence position.
• Use the navigation buttons to align the RED cross with
the white cross pattern.
Note:An adjusted cross pattern appears white with a minimum
of color protrusion.  
• Press “0” on the remote control keypad to display the
BLUE correction screen, then repeat procedure.  
• To exit convergence screen press OK button, then press
EXIT to quit all menus.
Cable Module Info
This menu is used to provide information when a DCM
(Digital Cable Module) is inserted into the DCM
INTERFACE (POD INTERFACE) slot on the back of the
projection television. If no DCM is present and you try to
access the Cable Module Info, the message ‘Cable Module
Not present’ will be displayed on screen. To receive the
features offered by your cable company, you may have to
subscribe to those services.
Note:Please contact your cable company regarding availability
of the DCM (Digital Cable Module). The cable module is
needed to  receive premium digital services (where
available)  through the cable input. You may also able to
order call-ahead pay per view events. 
Convergence
Convergence  Adj.
Reset to Default
S
T WX
EXIT
MENU
to return SELECT
OK
Press CH And VOL Key To
Align Green Lines To The 
Center Mark On The Cabinet
XX
XX
XXXXLeftRight Up
Down
Press Ok To Continue
Reference Marks
Front of cabinet
Press
  “0”
XXXXLeft RightUp
Down
Press Ok To Continue If Red Is Protruding From
Center Cross, Press CH And 
VOL Key To Correct
PRESS 0 To Adjust Blue
XXXXLeft RightUp
Down
Press Ok To Continue If Blue Is Protruding From
Center Cross, Press CH And 
VOL Key To Correct
PRESS 0 To Adjust Red
PRESS ACTION TO  EXIT
123
46
789
Press Ok To Exit Press 0 To Adjust BlueCorrecting Red Press # Key To Select Pos.
Press CH And VOL Key To Corr.
Press
  “0”
PRESS ACTION TO  EXIT
123
46
789
Press Ok To Exit Press 0 To Adjust BlueCorrecting Red Press # Key To Select Pos.
Press CH And VOL Key To Corr.PRESS ACTION TO  EXIT
123
46
789
Press Ok To Exit Press 0 To Adjust RedCorrecting Blue Press # Key To Select Pos.
Press CH And VOL Key To Corr.
P9 0474 E  080403R.fm  Page 27  Wednesday, August 13, 2003  8:18 AM 
						

							28 z
MENU OPERATIONS
ENGLISH
Lock
This HDTV Projection Television incorporates V-CHIP technology
to block the viewing of movies and television programs according
to the rating category. There are two (2) Content Advisory
Categories: MPAA (Motion Picture Association of America) and
TV Parental Guidelines Ratings. These categories are used as
guidelines for blocking the programs. The default mode for the
Lock category is the Unlocked state. In this state, you can surf the
various categories of the Lock menu. After you’ve created a
password, you are prompted to enter it before you can make any
changes in the Lock menu. 
Creating a Password
A password is created using the New Password menu.
Procedure
• Press MENU button to display the Main Menu.
• Press navigation buttons to highlight the LOCK icon.
• Press OK to display the New Password screen.
• Use the numeric keypad to create a 4 digit password.
• Press OK to enter the password. Now the PTV is in the
locked state. 
Lock Set
ˆMode - To prevent video games, VCR tapes and all
channels and video modes from being viewed. The
possible modes are: 
• Off - Turns off Lock set functions.
• All - All channels are locked regardless of the rating
level.
• Game Lock - Locks out CH 3, 4 and Video inputs.
• Channel Lock - Locks out specific analog and
digital channels. Password is required to view any
of the locked channels.
Procedure
• While in the Lock menu screen, highlight Lock Set and
press OK button to display the Lock Set sub-menu.
•Press W VOL or VOL X button to select the option and
press OK button to underline the option.
• Press MENU button to return to the previous screen.
Channel Lock
This option lets you select the RF Input (Antenna (A) or Antenna
(B) and block out up to four (4) channels from each input.
Password is required to view these blocked channels.
ˆRF Input - Select either Antenna (A) or Antenna (B).ˆChannel - Select up to four (4) channels to be blocked
out. These channels will be blocked out regardless of
the program rating. 
Procedure
• In Lock Set, choose Channel Lock and press OK button.
• Press MENU button to return to the previous menu.
• Highlight Channel Lock and press OK button to display
the Channel Lock sub-menu.
• Press OK and select  Antenna (A) or Antenna (B) using
WVOL or VOL X button. 
• Press CH T button and press OK.
• Select the channels to be blocked by using the left/right
navigation buttons and press OK to enter your selection.
A maximum of  four (4) channels can be blocked from
each input. These channels will be blocked regardless of
the ratings.
Note:To remove the channel # from the list, select the same
channel # and press the OK button.
Block Program
This feature allows you block movies and television programs
based on the MPAA and U.S. TV ratings system.
ˆMPAA - The MPAA uses the standard movie ratings to
block the movies from being displayed.
Procedure
• In Lock menu, select Block Program and press OK
button to display the sub-menu.
• Press OK button to enter the Mode field and select Off or
On using W VOL or VOL X button. Press OK to enter
the selection.
• Press CH TSbuttons to highlight the desired rating
level.
• Press OK button to change the rating limit to “Viewable”
or “Blocked”.
Note:The NR rating is independent of other ratings. Placing a
block on a specific age based rating level, this rating and
any other more restrictive ratings will also be blocked.
Password
New Password
- - - -EXIT MENU
to return
Lock set
ModeOffWXEXIT MENU
to return
OK
CHANGE
The maximum is 4 locked channels
Block ProgramMPAA
U.S.TV
ModeOff
NRViewable
G
PG
PG-13
NC-17
XViewable
Viewable
Viewable
Viewable
Viewable
OK
P9 0474 E  080403R.fm  Page 28  Wednesday, August 13, 2003  8:18 AM