Panasonic Hd Integrated Camera Aw He2_adv Operating Instructions

- 11 -
5Rotate the F1 dial to select each item and press the F1 dial to set it.
6Press and hold the CAMERA OSD button for 2 seconds to complete 
the menu settings.
≥Turn the F1 dial and select [EXIT], and press the F1 dial to complete the menu settings. 
In this case, the CAMERA OSD button on/off and the camera menu display/non-display 
may not match.
≥Switching the camera that is operated when the camera menu is displayed may result in 
the CAMERA OSD button on/off and the camera menu...

- 12 -
∫ About the zoom
≥The i.Zoom can magnify up to approximately twice as large as the natural size while the 
digital zoom can magnify up to four times as large as the natural size.
(i.Zoom: This zoom function allows you to maintain high-definition picture quality.)
≥ For information on the enabling/disabling of the digital zoom, refer to page 36.
∫ Pan/Tilt
≥Camera images can be moved horizontally, vertically, and diagonally.
≥ Pan/tilt cannot be performed when the zoom level is  k1.
Operating on...

- 13 -
Operating using the wireless remote controller
Zoom operationsZOOM button
T button: Close-up recording (zoom in)
W button : Wide-angle recording (zoom out)
FAST button/SLOW button
Press the FAST button to increase the zoom speed, and 
press the SLOW button to decrease the speed.
≥If you turn off the unit, high-speed zoom is cancelled.
HOME buttonIf you press and hold this button for 2 seconds, the zoom 
level changes to  k1.
Pan/tilt operations
3/4/ 2/1 button
Pan/tilt left, right, up and down....

- 14 -
Operating using the controller
Press the ZOOM button.TELE side: Close-up recording (zoom in)
WIDE side: Wide-angle recording (zoom out)
≥ The zooming speed changes depending on the extent to which the button is pressed.
≥ Hold down the PT ACTIVE button to light up the button.
Move PAN/TILT Lever Up/Down/Left/Right/Angle.≥ The pan/tilt speed will change depending on the angle that the lever is moved.
≥ The PTZ/FOCUS SPEED dial can be used to change the zoom speed and pan/tilt speed.
Zoom...

- 15 -
When coloration (white balance) is unnatural due to a light source or the like, set it manually.
≥This adjustment must be performed when using the unit for the first time or when the unit 
has not been used for a prolonged period.
≥ It must be performed when the lighting conditions or brightness has changed.
The following modes are available on the unit:
Setting using the Web setting screen
1Open the Setup screen.
2Click [Image].
Setting the White Balance
IconMode/Recording conditions
Auto White...

- 16 -
3Click the [Image] tab on the Image screen.
4Click [Setup] (Image adjust).
≥The Image adjust screen opens in a separate window.
5Select your desired [AWB Mode].
≥Select a suitable mode by looking at the coloration on the screen.
≥ When [AWB A] or [AWB B] is selected, the registered setting is retrieved.
∫ Performing the White Balance Setting
1 Set the mode to either [AWB A] or [AWB B].
2 Fill the screen with a white subject.
≥Do not shoot shiny or very bright objects.
3 Click [Execute] for [AWB]....

- 17 -
Operating using the wireless remote controller
Select the menu. (l9)
∫ Performing the White Balance Setting
1 Set the mode to either [AWB A] or [AWB B].
≥After setting the mode, end the camera menu.
2 Fill the screen with a white subject.
≥ Do not shoot shiny or very bright objects.
3 Press and hold the SET button of the wireless remote  controller for 2 seconds.
≥ When [OSD Status] is set to [On], [AWB OK] is displayed on the 
screen and adjustment is completed.
≥ When the white balance cannot be...

- 18 -
∫
Set the white balance
1 Set the mode to either [AWB A] or [AWB B].
2 Fill the screen with a white subject.
≥Do not shoot shiny or very bright objects.
3 Turn the F2 dial to select [AWB], and press the F2 dial.
≥ When [OSD Status] is set to [On], [AWB OK] is displayed on the screen and adjustment is 
completed.
≥ When the white balance cannot be set, the error message [AWB NG] is displayed on the 
screen. When this occurs, use another mode. 
∫ Set the white balance with the USER button
1 Set the...

- 19 -
Adjust the brightness of the image.
This unit can be used by switching between auto mode and manual mode.
Auto mode:
Brightness is adjusted automatically to suit the area of shooting.
Manual mode:
Adjust the brightness when taking images in areas that are too bright (or too dark).
≥[Contrast Level] and [Back Light COMP.] cannot be set in manual mode.
Setting using the Web setting screen
≥Open the Live screen
Operating using the wireless remote controller
Adjust the Brightness
:Switches to auto...

- 20 -
Operating using the controller
The unit switches between auto mode and manual mode each time the IRIS-AUTO 
button is pressed.
≥Auto mode is on when the IRIS-AUTO button lights up, and manual mode is on when it 
turns off.
IRIS dial:
The image becomes darker when rotating the dial toward  A in 
manual mode.
The image becomes brighter when rotating the dial toward B in 
manual mode.
≥ Holding down the IRIS dial in manual mode, adjusts the 
image to the darkest setting.
IRIS

