Panasonic Hd Integrated Camera Aw He2_adv Operating Instructions

							- 11 -
5Rotate the F1 dial to select each item and press the F1 dial to set it.
6Press and hold the CAMERA OSD button for 2 seconds to complete 
the menu settings.
≥Turn the F1 dial and select [EXIT], and press the F1 dial to complete the menu settings. 
In this case, the CAMERA OSD button on/off and the camera menu display/non-display 
may not match.
≥Switching the camera that is operated when the camera menu is displayed may result in 
the CAMERA OSD button on/off and the camera menu display/non-display not matching.
To get back to the previous screenSelect [ ] and then press the F1 dial.
To adjust the levelRotate the F1 dial to adjust the contrast level.
≥Press the F1 dial to set the level.
For detailed description of the respective camera menu items, refer to page 28. 
						

							- 12 -
∫ About the zoom
≥The i.Zoom can magnify up to approximately twice as large as the natural size while the 
digital zoom can magnify up to four times as large as the natural size.
(i.Zoom: This zoom function allows you to maintain high-definition picture quality.)
≥ For information on the enabling/disabling of the digital zoom, refer to page 36.
∫ Pan/Tilt
≥Camera images can be moved horizontally, vertically, and diagonally.
≥ Pan/tilt cannot be performed when the zoom level is  k1.
Operating on the Web setting screen
≥ Open the Live screen
≥ While the PinP is displayed, set the control mode to the Main screen. ( l22)
≥The zoom speed is the same as the high-speed zoom of the wireless remote controller. 
(The zoom speed cannot be changed)
≥Dragging and dropping from the control pad  area to an area outside the control pad will 
mean pan/tilt operations cannot be stopped. In this case, click within the control pad area 
to stop operations.
Zoom, Pan/Tilt
Zoom operations
Zoom button
:Wide-angle recording (zoom out)
:Set the zoom level to  k1
:Close-up recording (zoom in)
Pan/tilt operations
Control pad/button
AControl button:
Click to perform pan/tilt operations.
B Control pad:
Click or drag to perform pan/tilt operations. 
The closer to the edge of the pad, the faster 
the panning/tilting speed is.
 
						

							- 13 -
Operating using the wireless remote controller
Zoom operationsZOOM button
T button: Close-up recording (zoom in)
W button : Wide-angle recording (zoom out)
FAST button/SLOW button
Press the FAST button to increase the zoom speed, and 
press the SLOW button to decrease the speed.
≥If you turn off the unit, high-speed zoom is cancelled.
HOME buttonIf you press and hold this button for 2 seconds, the zoom 
level changes to  k1.
Pan/tilt operations
3/4/ 2/1 button
Pan/tilt left, right, up and down.
≥Press the 3 or  4 button and the  2 or 1 button 
simultaneously to move in a diagonal direction. (This is 
the same operation as the diagonal button of the 
control buttons in the web setting screen)
FAST button/SLOW buttonTo increase the pan/tilt speed, press the FAST button. To 
decrease the speed, press the SLOW button.
≥ If you turn off the unit, high-speed pan/tilt is cancelled. 
						

							- 14 -
Operating using the controller
Press the ZOOM button.TELE side: Close-up recording (zoom in)
WIDE side: Wide-angle recording (zoom out)
≥ The zooming speed changes depending on the extent to which the button is pressed.
≥ Hold down the PT ACTIVE button to light up the button.
Move PAN/TILT Lever Up/Down/Left/Right/Angle.≥ The pan/tilt speed will change depending on the angle that the lever is moved.
≥ The PTZ/FOCUS SPEED dial can be used to change the zoom speed and pan/tilt speed.
Zoom operations
Pan/tilt operations 
						

							- 15 -
When coloration (white balance) is unnatural due to a light source or the like, set it manually.
≥This adjustment must be performed when using the unit for the first time or when the unit 
has not been used for a prolonged period.
≥ It must be performed when the lighting conditions or brightness has changed.
The following modes are available on the unit:
Setting using the Web setting screen
1Open the Setup screen.
2Click [Image].
Setting the White Balance
IconMode/Recording conditions
Auto White Balance adjustment
Sunny mode:
Indoor applications with the same conditions as sunny, outdoor applications
Cloudy mode:
Indoor applications with the same conditions as cloudy, outdoor application
Indoor mode 1:
Incandescent light, video lights like in the studio, etc.
Indoor mode 2:
Color fluorescent lamps, sodium lamps in gymnasiums etc.
Manual adjustment mode:
Register a setting suited to a shooting location (White Balance Setting) and 
retrieve the setting.
≥ The White Balance Setting cannot be performed when color bars are 
displayed.
AT W
AW B  A
AW B  B 
						

							- 16 -
3Click the [Image] tab on the Image screen.
4Click [Setup] (Image adjust).
≥The Image adjust screen opens in a separate window.
5Select your desired [AWB Mode].
≥Select a suitable mode by looking at the coloration on the screen.
≥ When [AWB A] or [AWB B] is selected, the registered setting is retrieved.
∫ Performing the White Balance Setting
1 Set the mode to either [AWB A] or [AWB B].
2 Fill the screen with a white subject.
≥Do not shoot shiny or very bright objects.
3 Click [Execute] for [AWB].
≥ When [OSD Status] is set to [On], [AWB OK] is displayed on the screen and adjustment is 
completed.
≥ When the white balance cannot be set, the error message [AWB NG] is displayed on the 
screen. When this occurs, use another mode.  
						

							- 17 -
Operating using the wireless remote controller
Select the menu. (l9)
∫ Performing the White Balance Setting
1 Set the mode to either [AWB A] or [AWB B].
≥After setting the mode, end the camera menu.
2 Fill the screen with a white subject.
≥ Do not shoot shiny or very bright objects.
3 Press and hold the SET button of the wireless remote  controller for 2 seconds.
≥ When [OSD Status] is set to [On], [AWB OK] is displayed on the 
screen and adjustment is completed.
≥ When the white balance cannot be set, the error message [AWB 
NG] is displayed on the screen. When this occurs, use another 
mode. 
Operating using the controller
1Press the MENU button to light the button.
2Press the PRESET MEMORY/MENU 4 button (AWB/ABB) to light the 
button.
≥The AWB/ABB menu is displayed on the LCD 
panel.
3Rotate the F1 dial to select the white balance mode.≥[ATW], [AWB A], [AWB B], [3200K] (equivalent to “Indoor mode 1”), and [5600K] 
(equivalent to “Sunny mode”) can be selected from the controller menu.
4Press the F1 dial to set .
≥When selecting modes other than those above, use the camera menu settings. ( l9)
[CAMERA] 
# [AWB MODE]  # desired setting
[CAMERA]  # [AWB MODE]  # desired setting 
						

							- 18 -
∫
Set the white balance
1 Set the mode to either [AWB A] or [AWB B].
2 Fill the screen with a white subject.
≥Do not shoot shiny or very bright objects.
3 Turn the F2 dial to select [AWB], and press the F2 dial.
≥ When [OSD Status] is set to [On], [AWB OK] is displayed on the screen and adjustment is 
completed.
≥ When the white balance cannot be set, the error message [AWB NG] is displayed on the 
screen. When this occurs, use another mode. 
∫ Set the white balance with the USER button
1 Set the mode to either [AWB A] or [AWB B].
2 Fill the screen with a white subject.
≥Do not shoot shiny or very bright objects.
3 Press the USER button registered with [AWB].
≥ When [OSD Status] is set to [On], [AWB OK] is displayed on the screen and adjustment is 
completed.
≥ When the white balance cannot be set, the error message [AWB NG] is displayed on the 
screen. When this occurs, use another mode.
≥ Refer to the following for registering to the USER button.
Register to the USER button1) Press the MENU button to light the button.
2) Press the PRESET MEMORY/MENU 9 button (SETUP) to light the button.
≥The SETUP menu is displayed on the LCD panel.
3) Press the F1 dial.
4) Turn the F1 dial to display [USER1] or [USER2].
5) Rotate the F2 dial to select [AWB] and press the  F2 dial.
  
						

							- 19 -
Adjust the brightness of the image.
This unit can be used by switching between auto mode and manual mode.
Auto mode:
Brightness is adjusted automatically to suit the area of shooting.
Manual mode:
Adjust the brightness when taking images in areas that are too bright (or too dark).
≥[Contrast Level] and [Back Light COMP.] cannot be set in manual mode.
Setting using the Web setting screen
≥Open the Live screen
Operating using the wireless remote controller
Adjust the Brightness
:Switches to auto mode.
:Switches to manual mode.
:Adjusts the image darker in manual mode.
:Adjusts the image brighter in manual mode.
A/IRIS button:
Switches to auto mode.
M/IRIS button:
Switches to manual mode.
IRIS_ button:
Adjusts the image brighter in manual mode.
IRIS ` button:
Adjusts the image darker in manual mode. 
						

							- 20 -
Operating using the controller
The unit switches between auto mode and manual mode each time the IRIS-AUTO 
button is pressed.
≥Auto mode is on when the IRIS-AUTO button lights up, and manual mode is on when it 
turns off.
IRIS dial:
The image becomes darker when rotating the dial toward  A in 
manual mode.
The image becomes brighter when rotating the dial toward B in 
manual mode.
≥ Holding down the IRIS dial in manual mode, adjusts the 
image to the darkest setting.
IRIS

