Panasonic Hd Integrated Camera Aw He2_adv Operating Instructions

- 21 -
You can cut a portion of a camera image and displays it on a small screen (PinP: Picture in 
Picture) in the main screen.
≥You can change the PinP retrieval position, perform zoom operations for a PinP image, 
and change the PinP display position.
A PinP
B Main screen
Displaying PinP
1Open the Live screen.
2Select [On] for [PinP Display].
Select the menu. ( l9)
Press the OPT-ON button.
≥ You can show/hide a PinP image by pressing the button.
≥On a 1920 k1080 pixel monitor, a PinP image is...

- 22 -
Switching the Control Mode
You can switch the control mode to main screen or PinP while a PinP image is displayed.
Main screen control mode:
You can operate the main screen (zoom, pan/tilt).
PinP control mode:
You can change the PinP retrieval position, and perform zoom operations for a PinP image. 
(l 23, 24)
≥ When the control mode is set to PinP, the PinP retrieval 
frame  A is displayed on the HDMI output monitor, and the 
zoom level of the main screen is set to  k1.
1Open the Live screen....

- 23 -
Changing the PinP Retrieval Position
≥Set the control mode to PinP. ( l22)
1Open the Live screen.
2Click or drag the control pad/buttons.
≥The operation method is the same as the pan/tilt operations. 
(l 12)
≥ The PinP retrieval frame moves and the retrieval position 
changes.
≥ When [Home] is selected for [Preset] and [Move] is clicked, 
the PinP retrieval position moves to the center of the screen, 
and the PinP display zoom level is set to  k1.
Press the  3/4/2/1 button.≥The operation method is...

- 24 -
Zooming in and out on a PinP image
≥Set the control mode to PinP. ( l22)
1Open the Live screen.
2Operate the zoom buttons.
≥The operations are the same as the main 
screen zoom operations. ( l12)
≥ When [Home] is selected for [Preset] and [Move] is clicked, the PinP retrieval position 
moves to the center of the screen, and the PinP display zoom level is set to  k1.
Press the ZOOM button.≥ The operations are the same as the Main screen zoom 
operations. ( l13)
≥ To zoom faster, press the FAST...

- 25 -
Changing the PinP Display Position
You can change the PinP display position to the Upper Right , Lower Right , Upper Left , or 
Lower Left  area of the main screen.
1Open the Live screen.
2Pull down [PinP Position] 
and select your desired 
display position.
Select the menu. ( l9)
Operating Using the Web setting screen
Operating Using the Camera Menu
[CAMERA]  # [PinP POSITION]  # Desired display position 

- 26 -
You can save desired settings to the preset memory and call them when needed. (Up to 9)
≥You can save the following settings:
jZoom level
j Contrast
j PinP display/non-display
j PinP retrieval position
j PinP display zoom level
j PinP display position
j Pan/tilt positions j
White balance
j Control mode
j Digital zoom enablement/disablement
j Auto mode/manual mode for adjusting 
brightness
j Brightness adjustment value
Operating Using the Web setting screen
1Open the Live screen.
2Select one of the...

- 27 -
Operating using the wireless remote controller
Press one of the buttons 1 to 9 while pressing the 
PRESET button.
≥The current settings are registered in the preset memory. (When a 
number for which settings are already registered is chosen, those 
settings are overwritten)
To call the settings in the preset memoryPress one of the buttons 1 to 9.
Operating using the controller
The preset memories of the unit are registered in preset numbers 1 to 9 of the controller 
(page number 1, internal page...

- 28 -
You can configure the unit’s settings on web setting screen (the Setup screen)/camera menu.
1Open the Setup screen.
2To open your desired screen, click one of the options A to E.ABasic screen (Basic settings) ( l29)
B Image screen (Picture quality settings, System settings) ( l30)
C User mng. screen (User management settings) (l 37)
D Network screen (Network settings) ( l39)
E Maintenance screen (Maintenance settings) ( l41)
Using the Web setting screen/Camera 
Menu to Configure Settings
This...

- 29 -
Basic screen
Enter the name of the unit, and click [Set].
≥You can enter up to 20 single-byte characters.
≥ You can enter the following characters:
≥ The entered name appears on the camera title part at the top of the web setting screen.
[Camera title]
Single-byte numeric 
characters 0123456789
Single-byte alphabetical 
characters (upper and 
lower cases) ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
Symbols . @ _ 

- 30 -
Image screen
You can adjust the picture quality, save preset memories, configure the system settings, etc..
A [Image] tab
B [System] tab
C Camera image (when a tally light-up signal is received, a red frame is displayed over the 
camera image)
D [Setup] (Image adjust)
E [Setup] (Preset position)



