Panasonic Hd Integrated Camera Aw He2_adv Operating Instructions

- 31 -
1Click the [Image] tab on the Image screen.
2Click [Setup] (Image adjust).
≥The Image adjust screen opens in a separate window.
Adjust the contrast.
Click [
_] and [`] to adjust the level.
∫ Setting Using the Camera Menu
1 Select the menu.
2 Adjust the contrast level. ( l10, 11)
3 (When performing the operations using the wireless 
remote controller)
Press the enter button  A.
(When performing the operations using the controller)
Press the F1 button.
Adjusting the picture quality on the Image...

- 32 -
You can adjust the color depth.
Click [
_] and [`] to adjust the level.
∫Setting Using the Camera Menu
1 Select the menu.
2 Adjust the level. ( l10, 11)
3 (When performing the operations using the wireless 
remote controller)
Press the enter button  A.
(When performing the operations using the controller)
Press the F1 button.
Please refer to page 15.
This function enables human skin to appear smooth and more beautiful in images.
∫ Setting Using the Camera Menu
It is possible to expand the dynamic...

- 33 -
This makes the image brighter to prevent darkening of a backlit subject.
∫Setting Using the Camera Menu
1Click the [Image] tab on the Image screen.
2Click [Setup] (Preset position).
≥The Preset position screen opens in a separate window.
A Operations are the same as the preset memory operations for the Live screen. ( l26)
B Operations are the same as the operations for the Live screen. ( l12, 19, 21)
[Back Light COMP.][Off]/[On]
[CAMERA]  # [BACKLIGHT COMPENS.]  # [ON]
Using the preset memory on...

- 34 -
Click the [System] tab on the Image screen.
≥
The System screen opens.
≥ After changing settings, click [Set].
You can change the resolution of the HDMI output.
* When [System Frequency] is [59.94Hz(NTSC)], you can select [480p], and when it is set to  [50Hz(PAL)], you can select [576p].
∫ Setting Using the Camera Menu
Configuring the System Settings on the System Screen
[Format][1080p]/[1080i]/[720p]/[480p (576p)]*
[SYSTEM]  # [FORMAT]  # desired setting 

- 35 -
The down-conversion mode is selected here.
≥Only enabled when [Format] is [480p (576p)]*.
* When [System Frequency] is [59.94Hz(NTSC)], you can select [480p], and when it is set to  [50Hz(PAL)], you can select [576p].
∫ Setting Using the Camera Menu
≥When the camera menu is being displayed, [S ideCut] display becomes [LetterBox] display.
You can change the system frequency.
≥ When you press [Set] after setting the option, a message confirming that you want to 
reboot the unit is displayed. Press...

- 36 -
You can enable/disable the digital zoom (zoom level maximum: k4).
∫ Setting Using the Camera Menu
≥The larger the digital zoom magnification, the more the image quality is degraded.
“Enable” or “Disable” is set here for the function which turns on/ turns off the tally lamp using 
the tally control signal.
∫ Setting Using the Camera Menu
You can select whether to show/hide messages such as [AWB OK], which is displayed when 
performing the white balance setting ([AWB A]/[AWB B]).
∫Setting Using the...

- 37 -
User mng. screen
You can register users who can access the unit from a PC or AW-RP50. 
≥ Enter and set all of [User name], [Password], [Retype password] and [Access level], and 
then click [Set].
You can set whether to authenticate users when the web setting screen appears.
≥ Click [Set] to complete the setting.
≥If [On] has been selected as the [User auth.] setting, control will no longer be exercised 
from the AW-RP50.
You can register user names.
≥ You can register up to 9 users.
≥ You can...

- 38 -
You can set an authentication password that a user is asked to enter when the web setting 
screen or the Setup screen appears.
After entering a password in the [Password] field, re-enter the password in the [Retype 
password] field to prevent input errors.
≥Single-byte alphanumeric characters and single-byte symbols can be entered.
≥ From 4 to 32 characters can be entered.
You can set the access level of registered users.
Display registered user names and access levels.
E.g. In the case of admin...

- 39 -
Network screen
You can configure the network settings for the unit.
≥After changing settings, click [Set].
You can set whether to use th e DHCP function. To prevent computers that do not use DHCP 
function and other network cameras from usin g the same IP address, set the DHCP server. 
For details on the server settings, consult your network administrator.
Input the unit’s IP address here when the DHCP function is not going to be used. Input an 
address that will not duplicate an existing IP...

- 40 -
Input the unit’s subnet mask here if the DHCP function is not used.
≥This function’s default setting is [255.255.255.0].
Input the unit’s default gateway here  if the DHCP function is not used.
≥This function’s default setting is [192.168.0.1].
≥ Multiple IP addresses cannot be used for the default gateway even when the DHCP 
function is used.
For details on the DHCP server settings, consult your network administrator.
≥ If [Manual] is selected, the DNS settings must be established.
≥ If [Auto] is...