Panasonic Hc X920 Owners Manual

- 141 -
≥Please refer to the operating instruction of the device in use for details about the setting  of the 
wireless access point or smartphone.
If the Wi-Fi connection cannot be established
ProblemCheck points
It cannot connect to the 
wireless access point.
The wireless access point 
is not detected.
(General)
≥ Turn ON the wireless access point.
≥ Approach the wireless access point and reconnect.
≥ If it takes time to complete the connection, the Wi-Fi 
connection will be aborted.
Reset the...

- 142 -
It takes long time every 
time to connect to a 
smartphone.≥It may take longer time to connect depending on the Wi-Fi 
connection setting of the smartphone, but it is not a 
malfunction.
This unit is not displayed 
in the Wi-Fi setting screen 
of the smartphone.
≥ Try switching the ON/OFF of the Wi-Fi function in the Wi-Fi 
settings of the smartphone.
The Wi-Fi connection is 
disconnected immediately.
≥ If there is a setting for avoiding poor connections in the Wi-Fi 
setting menu of the Android...

- 143 -
Using a smartphone, you can perform record/playback operations from a remote location or upload 
motion pictures and still pictures recorded in this unit on SNS (Social Networking Service).
AWhen connecting to a smartphone
B When connecting to a wireless access point
≥Refer to [Help] in the “Image App” menu for further details on how to operate.
Proceed to Step 2 when your Wi-Fi connection has been made via [Direct Connection] in [Wi-Fi 
Setup]  ( l139 ).
1Press Wi-Fi button and touch [Link to...

- 144 -
1Connect the smartphone and the wireless access point.
2Press Wi-Fi button and touch [Link to Cell]. ≥It will go into connection standby for remote operation.
≥ Even if the Wi-Fi button is pressed continuously for approximately 2 seconds while Wi-Fi is not in 
use, it will go into connection standby for remote operation.
(This will operate even when the power of this unit is turned off excluding when the power of this 
unit is turned off by pressing the power button)
3Start up the smartphone...

- 145 -
Smartphone screen shots are example displayed in Motion Picture Recording Mode and Playback 
Mode.
* The screen differs depending on the operating system.
Screen display during remote operations
Recording screen1 Remaining battery power of this unit
2 Zoom
3 Photoshot button
4 Menu display
5 Playback mode button
6 Recording mode button
7 Recording start/stop button
8 Motion Picture Recording Mode/Still Picture 
Recording Mode toggle button
9 Name of the connected device
Playback screen
1 Number...

- 146 -
∫
When Recording Mode
≥Turning the unit off
≥ Selecting a mode
≥ Recording motion pictures/still pictures
≥ Selecting a media to record
≥ Using the zoom (Available in the medium or fast speed)
≥ Selecting a iA/MNL mode
≥ White Balance
≥ Recording format
≥ Backlight Compensation
≥ Picture Size
≥ Aspect Ratio
≥ Self-timer
∫ When Playback Mode
≥Playback
jScenes recorded in iFrame cannot be played back. 
j 3D still pictures are played back in 2D.
≥ Selecting a media to playback (SD card/Built-in...

- 147 -
Connecting this unit to a DLNA-compatible device via Wi-Fi, you can play back scenes and still 
pictures on the device.
ADLNA-compatible TV
1Press Wi-Fi button. 
2To u c h  [DLNA Play].≥If you touch [Change AP], you can switch the wireless access point to another one that has been 
registered to this unit.
≥ If you touch [CANCEL], the Wi-Fi connection is canceled.
≥ When the connection is complete, the screen of this unit turns off. To display it again, touch the 
screen.
3Select this unit (SSID)...

- 148 -
You can broadcast motion pictures of this unit live by setting up a link between the “LUMIX CLUB” 
and USTREAM.
1Press Wi-Fi button. 
2Touch [Live Cast].≥If a “LUMIX CLUB” Login ID and Password has not been registered to this unit yet, enter them 
according to the screen.
≥ If you touch [Change AP], you can switch the wireless access point to another one that has been 
registered to this unit.
≥ When the connection is made correctly, the screen of this unit switches to the Live Cast Mode.
∫ To...

- 149 -
Touch .≥/ /  will disappear when no touch function is 
performed for a specific period of time. To display them again, 
touch the screen.
∫ To start the live broadcast
Touch .≥If you press the start recording button, you can simultaneously 
record the broadcast to this unit.
≥ / /  will disappear when no touch function is 
performed for a specific period of time. To display them again, 
touch the screen.
∫ To stop the live broadcast
Touch .
≥When   (gray) is displayed, unsent data is present....

- 150 -
Touch   to display the live broadcast setting 
screen.
≥/ /  will disappear when no touch function is 
performed for a specific period of time. To display them again, 
touch the screen.
∫ To configure the e-mail delivery settings
You can make the delivery setting of a broadcast notification e-mail and the setting for the 
scheduled time and date of the broadcast indicated in the e-mail.
1 Touch [E-MAIL SETUP].
2 Touch [ON] or [OFF].
3 (When [ON] is selected)
To set the scheduled broadcast date....