Panasonic Hc X920 Owners Manual

- 151 -
∫
To save in USTREAM
1 Touch [Save in USTREAM].
2 Touch [ON] or [OFF].
∫To set the image quality of a motion picture you simultaneously 
broadcast and record
1 Touch [REC MODE].
2 Touch desired recording mode.
∫
To select the media
1 Touch [MEDIA SELECT].
2 Touch the media for recording motion pictures and the media for recording 
still pictures.
3 Touch [ENTER].
[ON]:Live motion pictures are saved on USTREAM.
[OFF]:Select this option not to save on USTREAM.
[PH]/[HA]/[HG]/[HE]
HC-X920M 

- 152 -
You can confirm the recording screen of this unit from outside using a smartphone.
≥Perform the home monitoring operation on the smartphone. ( l153 )
1Press Wi-Fi button. 
2Touch [Home Cam].
3Start up the smartphone application “Image App”.≥When a Wi-Fi connection guidance sc reen is displayed, select [NO].
≥ Use the smartphone to start home monitor.
∫ When configuring the home monitor settings for the first time
1Press Wi-Fi button. 
2Touch [Home Cam].
3Start up the smartphone application “Image...

- 153 -
∫When configuring the home monitor settings using QR code
1Press Wi-Fi button. 
2Touch [Home Cam].
3Touch [QR code].≥QR code is displayed on the screen of this unit.
4Start up the smartphone application “Image App”.
5Display the screen of a connection setup to home monitor from the menu of a 
smartphone.
6Scan QR code displayed on this unit with the smartphone.≥A confirmation screen is displayed on the screen of a smartphone. Touch [YES] to start home 
monitor.
To exit home monitoring:Touch...

- 154 -
≥When automatic recording is performed with non-moving object detection, the set time will 
be reset and non-moving object detection will start again.
Setting cannot be performed while operating monitoring with a smartphone.
Touch [Setup] and select desired setting.
∫ [Home Monitor Connect]
You can display the registration screen for a Device ID and Password.
∫[Remote Voice Level]
You can set the initial remote voice level and speaker volume level of the remote voice function.
≥The mode cannot be...

- 155 -
Configure various settings necessary to use the Wi-Fi function.
When connected to Wi-Fi, the settings cannot be changed.
1Press Wi-Fi button. 
2Touch [Wi-Fi Setup].
3Touch desired menu item.
You can add or delete wireless access points, or rearrange the display order of wireless access 
points.
≥Up to 3 wireless access points can be set.
≥ Please refer to page 134 for details about [Wireless Settings].
To add a wireless access point
1 Touch the part where no wireless access points 
are...

- 156 -
If you set [ON], the LCD monitor turns off when remotely operating this unit with a smartphone (in 
Motion Picture Recording Mode or Still Picture Recording Mode) so that power consumption is 
reduced.
≥When the LCD monitor is turned off, you can display the screen by touching it.
≥ If the Wi-Fi connection is turned off, this unit will turn off automatically approximately 30 minutes 
later.
This will set/clear the Password to limit the startup of the Wi-Fi setting menu.
By setting the Password,...

- 157 -
You can change or check your wireless LAN’s network settings, such as the [IP Address], [Subnet 
Mask] and [MAC Address].
≥If you touch [AUTO], the network settings are configured automatically. If you touch 
[MANUAL], you can set each item. Select the item you want to set, and set it.
≥ [MAC Address] cannot be changed.
Acquire a “LUMIX CLUB” Login ID (free).
If you register this unit to the  “LUMIX CLUB”, you can synchronize images between the devices you 
are using, or transfer these images to...

- 158 -
∫
Check or change the acquired Login ID/Password
≥To change the “LUMIX CLUB” Password on this unit, access the “LUMIX CLUB” website from 
your smartphone or PC and change the “LUMIX CLUB” Password in advance.
1 Press Wi-Fi button. 
2 Touch [Wi-Fi Setup].
3 Touch [LUMIX CLUB].
4 Touch [Add/Change Account].
5 To u c h  [
Change Account]≥The Login ID and Password are displayed.
≥ The Password is displayed as “ ”.
6 To u c h  [Login ID] or [Password].
7 Enter the Login ID or Password, and touch...

- 159 -
∫
Delete your Login ID and account from the “LUMIX CLUB”
Delete the Login ID from this unit when transferring  it to another party or disposing of it. You can 
also delete your “LUMIX CLUB” account.
1 Press Wi-Fi button. 
2 Touch [Wi-Fi Setup].
3 Touch [LUMIX CLUB].
4 Touch [Delete account].
≥The message is displayed. Touch [NEXT].5 Touch [YES] in the Login ID delete confirmation screen.≥The message is displayed. Touch [NEXT].6 Touch [YES] on the confirmation screen for deleting the “LUMIX CLUB”...

- 160 -
With the 3D Conversion Lens (optional) attached, you can record life-like and powerful 3D image. 
To view 3D image, a television that supports 3D is required.
≥In the unit, the recordable 3D images are AVCHD 3D format or side-by-side format (2-
screen structure).
≥ Lifelike and powerful 3D full high-definition image can be recorded by recording in AVCHD 3D 
format.
≥ Since the 3D image is recorded in side-by-side format, the recorded 3D image is not of high-
definition picture quality.
≥
Please...