Panasonic Hc X920 Owners Manual

- 181 -
B
Zebra (l82)
99% Luminance level ( l83)
PRE-REC ( l65)
Time Lapse Recording ( l52)
// Bass Setting ( l82)
Zoom Microphone (l 80)
Focus Microphone ( l80)
Stereo Microphone ( l80)
/ Wind Noise Canceler ( l79)
Power LCD ( l39)
/// / /
Image Stabilizer ( l46, 162 )/Optical Image 
Stabilizer Lock ( l62, 162 )
Picture Adjustment ( l82)
Digital Cinema Color ( l78)
Digital Cinema ( l72)
Brightness Adjustment 
(Miniature Effect/8mm movie/
Silent movie) ( l50, 51 )
Vividness Adjustment 
(Miniature Effect)...

- 182 -
∫
Playback indications ∫/
Indication of connection to 
Wi-Fi
∫ Indication of connection to 
USB HDD
∫ Indication of connection to 
other devices
∫ Confirmatory indications
1/;/ 5 // 6// 7/8/9 /: /
D /E /;1 /2;
Display during playback ( l29, 88 )
0h00m00s Playback Time ( l30)
No.10 Scene Number
Repeat Playback (l 90)
Resume Playback ( l90)
100-0001 Still picture folder/file name
Protected motion pictures/still 
pictures (l106 )
/////
/
 Play mode selection display ( l29)
1080/60p recorded scene 
(...

- 183 -
Major confirmation/error messages to be indicated on the screen in text.
*1  only
*2 /  only
Others
Messages
PERIODICALLY MAKE BACK UP OF DATA IN BUILT-IN MEMORY.*1
We recommend backing up important recorded motion pictures and still pictures periodically to 
a PC, DVD disc, etc. to protect it. (l168 ) This message does not indicate that there is a 
problem with this unit.
CHECK CARD.
This card is not compatible or it cannot be recognized by the unit.
If this message appears even though motion...

- 184 -
About recovery
If faulty management information is found, the messages may appear and a repair is performed. 
(Repairing may take time depending on the error.)
≥ is displayed when abnormal management information is detected when the scenes are 
displayed in thumbnail.
≥ Use a sufficiently charged battery or the AC adaptor.
≥ Depending on the condition of the data, it may not be possible to completely repair the data.
≥ If recovery fails, it will not be possible to play back scenes recorded before...

- 185 -
∫It is not a malfunction in following cases
Others
Troubleshooting
A clicking sound is heard 
when the unit is shaken. ≥
This is the sound of the lens moving and is not a defect.
This sound will no longer be heard when the unit is turned on 
and change the mode to   or  .
Object seems to be warped. ≥Object seems to be warped slightly when the object moves 
across the image very fast, but this is because the unit is using 
MOS for the image sensor. This is not a malfunction.
White round spots like...

- 186 -
“ERROR OCCURRED. 
PLEASE TURN UNIT OFF, 
THEN TURN ON AGAIN.” 
is displayed.≥
The unit has automatically detected an error. Restart the unit 
by turning the unit off and on.
≥ The unit will be turned off in about 1 minute if the unit is not 
turned off and on.
≥ Repair is needed if it is repeatedly displayed even if it is 
restarted. Detach the power connected, and consult the 
dealer who you purchased this unit from. Do not attempt to 
repair the unit by yourself.
Indication
ProblemCheck points...

- 187 -
Color or brightness of the 
image changes, or you 
may see horizontal bars in 
the image.
The LCD monitor flickers 
indoors.≥
Color or brightness of the image may change, or you may see 
horizontal bars in the image when the object is recorded 
under fluorescent light, mercury light or sodium light, etc., but 
this is not a malfunction.
≥ In Motion Picture Recording Mode, record in Intelligent Auto 
Mode/Intelligent Auto Plus Mode or set the shutter speed to 
1/60 in areas where the power supply...

- 188 -
VIERA Link does not work.(Setting on this unit)
≥Connect with a HDMI mini cable (supplied). ( l11 3 )
≥ Touch  , then touch [SETUP]  # [VIERA Link] #  [ON]. 
( l 11 3 )
≥ Turn the unit off and then back on again.
(Setting on other devices)
≥ If the TV input does not switch automatically, switch the input 
using the TV remote control.
≥ Check the VIERA Link setting on the connected device.
≥ Please refer to the operating instructions of the connected 
device.
Cannot copy scenes on 
the SD card by...

- 189 -
∫
If AVCHD scenes do not change smoothly when played back on 
another device
The images may be still for several seconds at the joins between the scenes if the following 
operations are performed when multiple scenes have been continuously played back using another 
unit.
≥Just how smoothly the scenes will be played back depends on the playback unit. Depending on 
the unit used, the images may stop moving and become still for a moment even when none of the 
following conditions are applicable....

- 190 -
≥A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at every 
4 GB of data when played back with another device.
≥ It may not play back smoothly when the editing of scenes was done with the HD Writer AE 5.0, 
but it will play back smoothly if you set the seamless settings in the HD Writer AE 5.0. Refer to the 
operating instructions for the HD Writer AE 5.0.
Principal reasons for not playing back smoothly
≥ When the scenes were recorded on different dates
≥ When...