Panasonic Hc X920 Owners Manual

- 91 -
Zooming in on a still picture during playback 
(Playback zoom)
You can zoom in by touching a still picture during playback.
1Touch and hold the part you wish to zoom in on during still picture playback.≥The still picture is zoomed in the following order:  k1  #  k2 #  k 4. Touch and hold the screen to 
zoom in from the normal display to  k2, Touch the screen to zoom in from  k2 to k 4.
≥ The still picture is zoomed in on, centering on the part you touched.
2Move to the zoomed in position by...

- 92 -
Playing back motion pictures/still pictures by date
The scenes or the still pictures recorded on the same day can be played back in succession.
1Touch the date select icon. (l18)
2Touch the playback date.The scenes or the still pictures recorded on the date 
selected are displayed as thumbnails.
3Touch the scene or the still picture to be 
played back.
≥Playing back of all the scenes or the still pictures returns if the unit is turned off or the mode is 
changed.
≥ In cases such as those described...

- 93 -
Highlight Playback
Part that was recognized as clearly recorded is extracted from multiple scenes, and it can be played 
back or stored in a short time with effects and music added.
It is also possible to create an original Highlig ht Playback by checking your favorite scenes and 
setting up to extract those scenes.
≥ Highlight Playback cannot be used for iFrame scenes and scenes saved in MP4.
1To u c h  .  ( l18)
2Touch the desired effects
≥The scenes matching the effect will be extracted and...

- 94 -
∫
Setting up the custom effect
It is possible to enjoy the Highlight Playback with your favorite effect by setting up the combination 
of an image effect and music.
1 Touch [CUSTOM].
2 Touch [EFFECT SETUP] or [MUSIC SELECT].
3 (When [EFFECT SETUP] is selected)
Touch the desired effect.
≥When [EFFECT SETUP] is changed, [MUSIC SELECT] will 
be set the same as [EFFECT SETUP]. (To set [EFFECT 
SETUP] and [MUSIC SELECT] to different settings, change [MUSIC SELECT] after setting 
[EFFECT SETUP].)
≥...

- 95 -
Touch [SET] to select the item to change.
∫Scene setting
1 (Only when Highlight Playback is started from [ALL AVCHD])
Touch the recording format of the scene to play back.
2 Touch [SELECT DATE] or [SELECT SCENES].
3 (When [SELECT DATE] is selected)
Touch the date to be played back.
≥A maximum of 7 days can be selected.
≥ When touched, the date is selected and surrounded by red. Touch the date again to cancel the 
operation.
(When [SELECT SCENES] is selected)
Touch the scenes to be played back.
≥Up...

- 96 -
∫
Checking the favorite scenes
1 Touch the scene to be played back.
2 Touch [Add] and add the favorite part.
≥Total of 4 seconds before and after touching the [Add] will be 
added as favorite.
≥ Number of favorite scenes that can be added are 
1 to 14. (Number of scenes that can be added differs 
depending on the scenes selected.)
≥ Favorite check display   ( A) is displayed in orange, and 
favorite check display  B is displayed on the slide bar.
≥ To cancel the favorite, play back to the position...

- 97 -
∫
Priority settings
1 Touch [FACE] or [FACE RECOG.].≥If you touch [FACE], any detected face, including the face of person registered for Face 
Recognition, is given priority on playback.
2 (When [FACE RECOG.] is selected)
Touch a face to specify.
≥You can specify up to 6 faces, which are to be played back in priority.
≥ When touched, the registered face is selected and surrounded by red. Touch the registered face 
again to cancel the operation.
≥ Touch [ENTER]. When a single face is specified, the...

- 98 -
The scenes put together as a Highlight Playback can be saved as a single scene./
The recorded scenes 
will be saved in the SD card.
The recorded scenes 
will be saved in the built-in memory.1 Stop the playback of the Highlight Playback or wait until the playback of the 
Highlight Playback is finished.
2 To u c h  [ S AV E ] .
3 Select the format to save.
.
≥When [QUALITY (AVCHD)] is selected, scenes recorded in 1080/60p are converted to 1080/60i 
(Picture quality [HA] of [REC MODE]) and saved.
≥...

- 99 -
Changing the playback settings and playing back the 
slide show
1To u c h  .  (l18)
2(Only when you would like to change the settings)
Touch [SET] to select the item to change.
3(When [DATE SETUP] is selected)
Touch the playback date.
(When [
PLAYBACK SETUP] is selected)
Touch [3D (NO EFFECT)] or [2D].
(When [
SLIDE INTERVAL] is selected)
Touch the interval of playback for the slide show.
(When [EFFECT SETUP] is selected)
Touch the desired effect.
≥ When [EFFECT SETUP] is changed, [MUSIC SELECT]...

- 100 -
(When [MUSIC SELECT] is selected)
Touch the desired sound.
≥Touch [ENTER].
(To test the music audio)
Touch [START] and start the audio testing.
≥Touch the other music option to change the music to be tested.
≥ When you touch [STOP], the music playback stops.
4Touch [START].
5Select the playback operation. ( l29)≥When the playback is finished or stopped, the screen to select [REPLAY], [SELECT AGAIN] or 
[EXIT] is displayed. Touch the desired item.