Panasonic Hc X1000 Owners Manual

- 161 -
Set the file number of the MOV/MP4 and still picture recorded next to 0001.
≥ Folder number is updated and f ile number will start from 0001. (l 96)
≥ To reset the folder number, format the SD card, and then perfor m [NUMBER RESET].
The unit’s USB terminal to which a USB cable will be connected  can be switched.
Switch the terminal according to the shape of the USB cable’s p lug you intend to connect to the unit.
The version of the firmware of this device is displayed.
The firmware of this device...

- 162 -
Using the smartphone app “Image App”, you can transfer clock information and wireless access 
point information (SSID and password) between a smartphone and  this unit. (l120 )
You can add or delete wireless access points, or rearrange the  display order of wireless access 
points. ( l123 , 129 )
You can set up a direct connection between this unit and a smar tphone. (l125)
This will disconnect the Wi-Fi connection.
You can enable/disable the NFC function.
This will set/clear the Password to...

- 163 -
Video Setup
All default settings are indicated with underlined text.
≥Press the THUMBNAIL button to switch this unit to the Playback  Mode.
≥ Touch the play mode select icon, and set this unit to Motion Pi cture Playback Mode. (l79)
Playback of the first scene starts after playback of the last s cene finishes when set to [ON]. (l85)
If playback of a scene was stopped halfway, the playback can be  resumed from where it was 
stopped when set to [ON]. ( l86)
Scenes can be protected so that they are...

- 164 -
∫
Recording indications
Display
Indications
TC 00:00:0000
1/100OPEN
150M
AF50
D 5X
Z00NOV 15 2014 15:30
0dB
PRE-REC


AT W
ND1/64
WB
R 1h20m
R 1h20m
12
99%60p FBC
Example: Display in English
A
TC 00:00:00.00
Counter display ( l57)
Interval Recording ( l144 )
PRE-REC ( l146)
¥ , ; (Red) Recording
; (Green) Recording pause
,  ,  , 
Intelligent Auto Mode ( l34)
,  ,  , 
Intelligent Auto Plus Mode ( l36)
Manual Mode ( l34)
Remaining battery power 
( l 18)
,   
(White) Recording to card possible...

- 165 -
ND 1/4, 
ND 1/16, 
ND 1/64ND filter (
l73)
99% Luminance level ( l68, 74 )
Luminance display frame 
( l 74)
Center Marker ( l154 )
AGC, 0dB Gain value (l49)
Auto iris mode ( l48)
Backlight Compensation 
( l 64)
Spotlight ( l64)
OPEN, F2.0 Iris value (l48)
WB Multi Manual Function ( l77)
Time Stamp recording in 
progress ( l147 )
1/100 Shutter speed (l51)
1/100.0 Synchro Scan (l52)
C
When [AUDIO ALC CH1] is 
enabled ( l56)
When [AUDIO ALC CH2] is 
enabled ( l56)
When [AUDIO ALC CH1], 
[AUDIO ALC...

- 166 -
∫
Playback indications
∫ Indication of connection to 
Wi-Fi ∫
Indication of connection to 
USB HDD
∫ Indication of connection to 
other devices
∫ Confirmatory indications
1, ;, 5 ,  ,  6,  ,  7, 8, 9 , : , 
D , E , ;1 , 2;
Display during playback ( l79, 83 )
TC 00:00:00.00
Counter Display (l 57)
No.10
No.0010 Scene Number (In Playback 
Mode)
Scene Number (In 1-scene 
display in thumbnail mode)
15:30 Time indication ( l27)
NOV 15 2014  Date indication
Repeat Playback ( l85)
Resume Playback ( l86)...

- 167 -
Major confirmation/error messages to be indicated on the screen in text.
About recovery
If faulty management information is found, the messages may app ear and a repair is performed. 
(Repairing may take time depending on the error.)
≥  is displayed when abnormal management information is detected  when the scenes are 
displayed in thumbnail.
≥ Use a sufficiently charged battery or the AC adaptor.
≥ Depending on the condition of the data, it may not be possible  to completely repair the data.
≥...

- 168 -
∫It is not a malfunction in following cases
Others
Troubleshooting
The lens, the viewfinder or 
LCD monitor fog up. ≥
This is due to condensation. It is not a breakdown. Please refe r 
to page  2.
A clicking sound is heard 
when the unit is shaken. ≥
This is the sound of the lens moving and is not a defect.
This sound will no longer be heard when the unit is turned on 
and switch to Recording Mode.
Object seems to be warped. ≥Object seems to be warped slightly when the object moves 
across the...

- 169 -
Indication
ProblemCheck points
Function display 
(Remaining Display, 
Counter Display, etc.) is 
not displayed. ≥
[CARD & BATTERY] or [OTHER DISPLAY] of the 
[DISP SETUP] is [OFF]. ( l155 )
≥ Press the COUNTER button to switch the counter display. 
(l 57)
Recording
ProblemCheck points
The unit arbitrarily stops 
recording. ≥
Use an SD card that can be used for motion picture recording. 
(l 20)
≥ The recordable time may have shortened due to the 
deterioration of the data writing speed or repeated...

- 170 -
With other products
ProblemCheck points
Although this unit is 
correctly connected to a 
TV, images cannot be 
seen.
The images are squeezed 
horizontally. ≥
Please read the operating instructions of your TV and select 
the channel that matches the input used for the connection.
≥ Change the setting of the unit depending on the cable 
connecting to the TV. ( l91)
Even when this unit is 
connected to the TV by the 
HDMI cable, images or 
sounds are not output. ≥
Check if the HDMI cable is...