Panasonic Hc X1000 Owners Manual
Here you can view all the pages of manual Panasonic Hc X1000 Owners Manual. The Panasonic manuals for Camcorder are available online for free. You can easily download all the documents as PDF.
Page 141
![Page 141
- 141 -
≥When [MP4(LPCM)] in [REC MODE] is selected
* The system frequency will be set to 2 4.00 Hz when [C4K/24p 100M] is set.
≥ When [MP4] in [REC MODE] is selected
Recording
formatSystem frequency settingSize
(Picture size)Frame rateBit rate (VBR)
[C4K/24p 100M]*[59.94Hz(NTSC)]/ [50Hz(PAL)] C4K
(4096k 2160) 24p Average 100 Mbps
[4K/60p 150M]
[59.94Hz(NTSC)] 4K
(3840k 2160) 60p Average 150 Mbps
[4K/30p 100M]
30p
Average 100 Mbps
[4K/24p 100M] 24p
[FHD/60p ]
FHD
(1920k 1080) 60p
Average 200 Mbps...](http://img.usermanuals.tech/thumb/58/64325/w300_hc-x1000_adv_en_om_d-140.png "Page 141
- 141 -
≥When [MP4(LPCM)] in [REC MODE] is selected
* The system frequency will be set to 2 4.00 Hz when [C4K/24p 100M] is set.
≥ When [MP4] in [REC MODE] is selected
Recording
formatSystem frequency settingSize
(Picture size)Frame rateBit rate (VBR)
[C4K/24p 100M]*[59.94Hz(NTSC)]/ [50Hz(PAL)] C4K
(4096k 2160) 24p Average 100 Mbps
[4K/60p 150M]
[59.94Hz(NTSC)] 4K
(3840k 2160) 60p Average 150 Mbps
[4K/30p 100M]
30p
Average 100 Mbps
[4K/24p 100M] 24p
[FHD/60p ]
FHD
(1920k 1080) 60p
Average 200 Mbps...")
- 141 - ≥When [MP4(LPCM)] in [REC MODE] is selected * The system frequency will be set to 2 4.00 Hz when [C4K/24p 100M] is set. ≥ When [MP4] in [REC MODE] is selected Recording formatSystem frequency settingSize (Picture size)Frame rateBit rate (VBR) [C4K/24p 100M]*[59.94Hz(NTSC)]/ [50Hz(PAL)] C4K (4096k 2160) 24p Average 100 Mbps [4K/60p 150M] [59.94Hz(NTSC)] 4K (3840k 2160) 60p Average 150 Mbps [4K/30p 100M] 30p Average 100 Mbps [4K/24p 100M] 24p [FHD/60p ] FHD (1920k 1080) 60p Average 200 Mbps...
Page 142
![Page 142
- 142 -
≥When [AVCHD] in [REC MODE] is selected
∫ About the [REC FORMAT] setting when [SYSTEM FREQ] has been
changed
If you change the system frequency when [REC MODE] is set to [M OV(LPCM)], [MP4(LPCM)] or
[MP4], [REC FORMAT] will be change d to a setting that matches the system frequency you have
set. (The frame rate will be changed.)
≥ The setting does not change when set to [C4K/24p 100M].
* If you set [REC FORMAT] to a setting with a frame rate of 25p w hen [SYSTEM FREQ] is set to
[50Hz(PAL)],...](http://img.usermanuals.tech/thumb/58/64325/w300_hc-x1000_adv_en_om_d-141.png "Page 142
- 142 -
≥When [AVCHD] in [REC MODE] is selected
∫ About the [REC FORMAT] setting when [SYSTEM FREQ] has been
changed
If you change the system frequency when [REC MODE] is set to [M OV(LPCM)], [MP4(LPCM)] or
[MP4], [REC FORMAT] will be change d to a setting that matches the system frequency you have
set. (The frame rate will be changed.)
≥ The setting does not change when set to [C4K/24p 100M].
* If you set [REC FORMAT] to a setting with a frame rate of 25p w hen [SYSTEM FREQ] is set to
[50Hz(PAL)],...")
- 142 - ≥When [AVCHD] in [REC MODE] is selected ∫ About the [REC FORMAT] setting when [SYSTEM FREQ] has been changed If you change the system frequency when [REC MODE] is set to [M OV(LPCM)], [MP4(LPCM)] or [MP4], [REC FORMAT] will be change d to a setting that matches the system frequency you have set. (The frame rate will be changed.) ≥ The setting does not change when set to [C4K/24p 100M]. * If you set [REC FORMAT] to a setting with a frame rate of 25p w hen [SYSTEM FREQ] is set to [50Hz(PAL)],...
Page 143
![Page 143
- 143 -
You can set the auto switch recording, simultaneous recording and background recording.
≥ Insert SD cards to card slot 1 and card slot 2.
*1 This effect cannot be set for Interval Recording.
*2 This function is not available in the following cases: jWhen [REC FORMAT] is set to a setting with a size of C4K (4096 k2160) or 4K (3840 k2160)
j When the bit rate of [REC FORMAT] is above 50 Mbps
∫ Auto switch recording
This is simple Relay Recording. It is possible to continuously record on the SD card...](http://img.usermanuals.tech/thumb/58/64325/w300_hc-x1000_adv_en_om_d-142.png "Page 143
- 143 -
You can set the auto switch recording, simultaneous recording and background recording.
≥ Insert SD cards to card slot 1 and card slot 2.
*1 This effect cannot be set for Interval Recording.
*2 This function is not available in the following cases: jWhen [REC FORMAT] is set to a setting with a size of C4K (4096 k2160) or 4K (3840 k2160)
j When the bit rate of [REC FORMAT] is above 50 Mbps
∫ Auto switch recording
This is simple Relay Recording. It is possible to continuously record on the SD card...")
- 143 - You can set the auto switch recording, simultaneous recording and background recording. ≥ Insert SD cards to card slot 1 and card slot 2. *1 This effect cannot be set for Interval Recording. *2 This function is not available in the following cases: jWhen [REC FORMAT] is set to a setting with a size of C4K (4096 k2160) or 4K (3840 k2160) j When the bit rate of [REC FORMAT] is above 50 Mbps ∫ Auto switch recording This is simple Relay Recording. It is possible to continuously record on the SD card...
Page 144
![Page 144
- 144 -
How to use background recording≥Register [BACKGROUND] to a USER button. ( l61)1 Press the recording start/stop button to start recording.≥A motion picture will start being recorded to the two SD cards. ( will be displayed in red.)
≥ If you press the USER button to w hich [BACKGROUND] is registered, you can start recording
only to the SD card in card slot 2.
≥ For information on how to register a function to USER buttons, refer to page 61. For information
on how to use the USER button to...](http://img.usermanuals.tech/thumb/58/64325/w300_hc-x1000_adv_en_om_d-143.png "Page 144
- 144 -
How to use background recording≥Register [BACKGROUND] to a USER button. ( l61)1 Press the recording start/stop button to start recording.≥A motion picture will start being recorded to the two SD cards. ( will be displayed in red.)
≥ If you press the USER button to w hich [BACKGROUND] is registered, you can start recording
only to the SD card in card slot 2.
≥ For information on how to register a function to USER buttons, refer to page 61. For information
on how to use the USER button to...")
- 144 - How to use background recording≥Register [BACKGROUND] to a USER button. ( l61)1 Press the recording start/stop button to start recording.≥A motion picture will start being recorded to the two SD cards. ( will be displayed in red.) ≥ If you press the USER button to w hich [BACKGROUND] is registered, you can start recording only to the SD card in card slot 2. ≥ For information on how to register a function to USER buttons, refer to page 61. For information on how to use the USER button to...
Page 145
![Page 145
- 145 -
≥ appears on the screen.
≥ After recording, the setting of Interval Recording is canceled.
≥ Audio cannot be recorded.
≥ “h” is an abbreviation for hour, “min” for minute and “s” for s econd.
≥ These times are approximations.
≥ Maximum recordable time is 12 hours.
≥Still picture recording cannot be used.
≥ This function is not available during Freeze Frame. ( l67)
≥ When Interval Recording is set, the [REC FORMAT] setting changes as follows. In addition, the
settings for [REC MODE] and [REC...](http://img.usermanuals.tech/thumb/58/64325/w300_hc-x1000_adv_en_om_d-144.png "Page 145
- 145 -
≥ appears on the screen.
≥ After recording, the setting of Interval Recording is canceled.
≥ Audio cannot be recorded.
≥ “h” is an abbreviation for hour, “min” for minute and “s” for s econd.
≥ These times are approximations.
≥ Maximum recordable time is 12 hours.
≥Still picture recording cannot be used.
≥ This function is not available during Freeze Frame. ( l67)
≥ When Interval Recording is set, the [REC FORMAT] setting changes as follows. In addition, the
settings for [REC MODE] and [REC...")
- 145 - ≥ appears on the screen. ≥ After recording, the setting of Interval Recording is canceled. ≥ Audio cannot be recorded. ≥ “h” is an abbreviation for hour, “min” for minute and “s” for s econd. ≥ These times are approximations. ≥ Maximum recordable time is 12 hours. ≥Still picture recording cannot be used. ≥ This function is not available during Freeze Frame. ( l67) ≥ When Interval Recording is set, the [REC FORMAT] setting changes as follows. In addition, the settings for [REC MODE] and [REC...
Page 146
![Page 146
- 146 -
This allows the recording of an image and audio to start before you press the recording start/stop
button. AVCHD scenes will be recorded from approximately 3 seconds before the operation, while
MOV/MP4 will be recorded from approximately 4 seconds before the operation.
≥ appears on the screen.
≥Aim the unit at the subject beforehand.
≥ There is no beep sound.
≥ This function is not available in the following cases:
jDuring the Interval Recording
j When [2 SLOTS FUNC.] is set to [BACKGROUND]...](http://img.usermanuals.tech/thumb/58/64325/w300_hc-x1000_adv_en_om_d-145.png "Page 146
- 146 -
This allows the recording of an image and audio to start before you press the recording start/stop
button. AVCHD scenes will be recorded from approximately 3 seconds before the operation, while
MOV/MP4 will be recorded from approximately 4 seconds before the operation.
≥ appears on the screen.
≥Aim the unit at the subject beforehand.
≥ There is no beep sound.
≥ This function is not available in the following cases:
jDuring the Interval Recording
j When [2 SLOTS FUNC.] is set to [BACKGROUND]...")
- 146 - This allows the recording of an image and audio to start before you press the recording start/stop button. AVCHD scenes will be recorded from approximately 3 seconds before the operation, while MOV/MP4 will be recorded from approximately 4 seconds before the operation. ≥ appears on the screen. ≥Aim the unit at the subject beforehand. ≥ There is no beep sound. ≥ This function is not available in the following cases: jDuring the Interval Recording j When [2 SLOTS FUNC.] is set to [BACKGROUND]...
Page 147
![Page 147
- 147 -
≥When [INFRARED REC] is set to [ON], this unit cannot be set to I ntelligent Auto Mode even if you
slide the iA/MANU switch.
≥ When [INFRARED REC] is set to [ON], focus values may not be disp layed correctly. (l39)
≥ The shadow of the external microphone may appear on the edge of the screen, depending on its
type or the way it is attached. ( l12)
You can stamp the date and time of recording on the images you record.
≥ appears on the screen.
≥The display mode and format of the date and time...](http://img.usermanuals.tech/thumb/58/64325/w300_hc-x1000_adv_en_om_d-146.png "Page 147
- 147 -
≥When [INFRARED REC] is set to [ON], this unit cannot be set to I ntelligent Auto Mode even if you
slide the iA/MANU switch.
≥ When [INFRARED REC] is set to [ON], focus values may not be disp layed correctly. (l39)
≥ The shadow of the external microphone may appear on the edge of the screen, depending on its
type or the way it is attached. ( l12)
You can stamp the date and time of recording on the images you record.
≥ appears on the screen.
≥The display mode and format of the date and time...")
- 147 - ≥When [INFRARED REC] is set to [ON], this unit cannot be set to I ntelligent Auto Mode even if you slide the iA/MANU switch. ≥ When [INFRARED REC] is set to [ON], focus values may not be disp layed correctly. (l39) ≥ The shadow of the external microphone may appear on the edge of the screen, depending on its type or the way it is attached. ( l12) You can stamp the date and time of recording on the images you record. ≥ appears on the screen. ≥The display mode and format of the date and time...
Page 148
![Page 148
- 148 -
You can record bright pictures even in dark places by slowing the shutter speed.
Slow Shutter works in Auto Shutter Mode. ( l51)
≥ The shutter speed will be adjusted to one of the following valu es according to the ambient
brightness. The value will differ depending on the frame rate o f the [REC FORMAT].
≥When the shutter speed becomes 1/30, 1/24 or 1/25, the screen m ay be seen as if frames are
missed and after images may appear.
Changes the zoom magnification setting of Digital Zoom. ( l65)...](http://img.usermanuals.tech/thumb/58/64325/w300_hc-x1000_adv_en_om_d-147.png "Page 148
- 148 -
You can record bright pictures even in dark places by slowing the shutter speed.
Slow Shutter works in Auto Shutter Mode. ( l51)
≥ The shutter speed will be adjusted to one of the following valu es according to the ambient
brightness. The value will differ depending on the frame rate o f the [REC FORMAT].
≥When the shutter speed becomes 1/30, 1/24 or 1/25, the screen m ay be seen as if frames are
missed and after images may appear.
Changes the zoom magnification setting of Digital Zoom. ( l65)...")
- 148 - You can record bright pictures even in dark places by slowing the shutter speed. Slow Shutter works in Auto Shutter Mode. ( l51) ≥ The shutter speed will be adjusted to one of the following valu es according to the ambient brightness. The value will differ depending on the frame rate o f the [REC FORMAT]. ≥When the shutter speed becomes 1/30, 1/24 or 1/25, the screen m ay be seen as if frames are missed and after images may appear. Changes the zoom magnification setting of Digital Zoom. ( l65)...
Page 149
![Page 149
- 149 -
Switches the adjustment method of the audio recording level for audio channel 1. (l55)
Switches the adjustment method of the audio recording level for audio channel 2. (l55)
≥ Set [AUDIO LEVEL CH1]/[AUDIO LEVEL CH2] to [MANUAL]. ( l55)
≥ Set [AUDIO ALC CH1]/[AUDIO ALC CH2] to [ON]. ( l56)
If you set this item to [ON], when ALC works for either of the audio channels, it will also work for the
other audio channel. ( l56)
If you set this item to [ON], you can reduce the audio noise of audio...](http://img.usermanuals.tech/thumb/58/64325/w300_hc-x1000_adv_en_om_d-148.png "Page 149
- 149 -
Switches the adjustment method of the audio recording level for audio channel 1. (l55)
Switches the adjustment method of the audio recording level for audio channel 2. (l55)
≥ Set [AUDIO LEVEL CH1]/[AUDIO LEVEL CH2] to [MANUAL]. ( l55)
≥ Set [AUDIO ALC CH1]/[AUDIO ALC CH2] to [ON]. ( l56)
If you set this item to [ON], when ALC works for either of the audio channels, it will also work for the
other audio channel. ( l56)
If you set this item to [ON], you can reduce the audio noise of audio...")
- 149 - Switches the adjustment method of the audio recording level for audio channel 1. (l55) Switches the adjustment method of the audio recording level for audio channel 2. (l55) ≥ Set [AUDIO LEVEL CH1]/[AUDIO LEVEL CH2] to [MANUAL]. ( l55) ≥ Set [AUDIO ALC CH1]/[AUDIO ALC CH2] to [ON]. ( l56) If you set this item to [ON], when ALC works for either of the audio channels, it will also work for the other audio channel. ( l56) If you set this item to [ON], you can reduce the audio noise of audio...
Page 150
![Page 150
- 150 -
Sets the input level of the external microphone connected to the audio input terminal 1 (XLR 3 pin).
Sets the input level of the external microphone connected to th e audio input terminal 2 (XLR 3 pin).
TC/UB SETUP
All default settings are indicated with underlined text.
≥Set [SYSTEM FREQ] to [59.94Hz(NTSC)]. ( l159 )
Select the compensation mode for the time code. ( l58)
≥This item will be automatically set to [NDF] and will not be di splayed as a menu item when
[SYSTEM FREQ] is se t to...](http://img.usermanuals.tech/thumb/58/64325/w300_hc-x1000_adv_en_om_d-149.png "Page 150
- 150 -
Sets the input level of the external microphone connected to the audio input terminal 1 (XLR 3 pin).
Sets the input level of the external microphone connected to th e audio input terminal 2 (XLR 3 pin).
TC/UB SETUP
All default settings are indicated with underlined text.
≥Set [SYSTEM FREQ] to [59.94Hz(NTSC)]. ( l159 )
Select the compensation mode for the time code. ( l58)
≥This item will be automatically set to [NDF] and will not be di splayed as a menu item when
[SYSTEM FREQ] is se t to...")
- 150 - Sets the input level of the external microphone connected to the audio input terminal 1 (XLR 3 pin). Sets the input level of the external microphone connected to th e audio input terminal 2 (XLR 3 pin). TC/UB SETUP All default settings are indicated with underlined text. ≥Set [SYSTEM FREQ] to [59.94Hz(NTSC)]. ( l159 ) Select the compensation mode for the time code. ( l58) ≥This item will be automatically set to [NDF] and will not be di splayed as a menu item when [SYSTEM FREQ] is se t to...