Panasonic Hc X1000 Owners Manual

- 121 -
5Follow the on-screen instructions of the smartphone to set up a connection.≥When the settings is complete, the smartphone and this unit are  connected directly, allowing you 
to use remote operations. ( l11 5 )
1Press the USER button to which [Wi-Fi] is registered, and turn  on the Wi-Fi 
function.
2Select the menu.
≥ Touch [YES].
3Touch [QR code] or [Wi-Fi].
∫ When [QR code] is selected
1 Start up the smartphone application “Image App”.
2 On the smartphone, select [QR code], and scan the QR...

- 122 -
Connecting to a wireless access point
≥Register [Wi-Fi] to a USER button. ( l61)Check if the wireless access point you are using is compatible  with WPSjIf the wireless access poin t is compatible with WPS:
Proceed to the following Connecting with WPS
j If the wireless access point is not compatible with WPS:
[Searching for wireless access points to set up a connection] ( l123 )
1Press the USER button to which [Wi-Fi] is registered, and turn  on the Wi-Fi 
function.
2Select the menu.
≥ Touch...

- 123 -
≥Confirm Encryption key (Password)  of the selected wireless access point if the network 
authentication is encrypted.
1Press the USER button to which [Wi-Fi] is registered, and turn  on the Wi-Fi 
function.
2Select the menu.
≥ Touch [OK].
3Touch the part with no display of a wireless 
access point.
≥For information on how to delete wireless access points or 
change the display order of wireless access points, please 
refer to [Wireless Settings] on page  129.
4Touch [Search for wireless...

- 124 -
Entering text
≥Touch the text entry icon in the center of the screen and enter  the text.
≥ A maximum of 32 characters can be entered.
≥ When connecting by [Manual Setting], confirm the SSID (Identifi cation name), Authentication 
method, Encryption type, and Encryption key (Password) of the w ireless access point you are 
using.
1Press the USER button to which [Wi-Fi] is registered, and turn  on the Wi-Fi 
function.
2Select the menu.
≥ Touch [OK].
3Touch the part with no display of a wireless...

- 125 -
≥When [WEP] is selected, proceed according to step 8.
7Touch the desired Encryption method.≥If you select [NONE], a message is displayed after completing t he connection.
8(When selecting [WEP]/[TKIP]/[AES])
Touch [INPUT], then enter the Password.≥For details on how to enter characters, refer to page  124.
≥ When the entry is complete, touch [Enter].
≥ A message is displayed when the connection is complete.
≥Check the wireless access points instruction manual and setting s when a saving wireless...

- 126 -
1Press the USER button to which [Wi-Fi] is registered, and turn on the Wi-Fi 
function.
2Select the menu.
3Touch [Change connection type].
4Touch [QR code].≥ QR code is displayed on the screen of this unit.
5Start up the smartphone application “Image App”.
6On the smartphone, select [QR code], and scan the QR code displ ayed on the 
screen of this unit.
≥ When using an Android device, the smartphone and this unit are connected directly, allowing you 
to use remote operations. ( l11 5 )
≥ When...

- 127 -
≥Transmission speed may decrease, or may not be usable depending  on the environment it is 
used in.
If the Wi-Fi connecti on cannot be established
≥Please refer to the operating instruction of the device in use  for details about the setting of the 
wireless access point or smartphone.
Confirming that the Wi-Fi connection is complete
j  is displayed on the screen
ProblemCheck points
It cannot connect to the 
wireless access point.
The wireless access point 
is not detected.
(General)
≥ Turn ON...

- 128 -
The Wi-Fi connection is 
not possible between this 
unit and a smartphone.(Wireless Access Point Connection)
≥Make sure the smartphone is properly connected to the 
wireless access point by checking the Wi-Fi settings of the 
smartphone.
≥ Make sure this unit and the smartphone are connected to the 
same wireless access point.
≥ Make sure the wireless access point is registered in this unit.  
( l 129 )
(Direct Connection)
≥ Make sure the smartphone is properly connected to this unit 
by checking...

- 129 -
Configure various settings necessary to use the Wi-Fi function.
When connected to Wi-Fi, the settings cannot be changed.
1Press the USER button to which [Wi-Fi] is registered, and turn on the Wi-Fi 
function.
2Select the menu.
Please refer to page  120.
You can add or delete wireless access points, or rearrange the  display order of wireless access 
points.
≥ Up to 3 wireless access points can be set.
≥ Please refer to page  122 for details about [Wireless Settings].
To connect a wireless access...

- 130 -
To switch the display order
1Touch the access point you want to switch the order.
2 Switch the order by touching   or  .
≥To change the wireless access point, delete one of the register ed wireless access points, and 
then add one.
Please refer to page  125.
This will disconnect the Wi-Fi connection.
You can enable/disable the NFC function.
This will set/clear the Password to limit the startup of the Wi -Fi setting menu.
By setting the Password, it will prevent erroneous operation, p revent...