Panasonic Hc X1000 Owners Manual

- 71 -
≥Register “Background” to a USER button. (l 61)
When [2 SLOTS FUNC.] is set to [BACKGROUND], you can start/stop  background recording.
≥ When the recording destination of motion pictures is set to [SD CARD 1] in [MEDIA SELECT] 
(l 30), [SD CARD 2] will be used for background recording.
The following instructions assume that the recording destinatio n of motion pictures is set to [SD 
CARD 1].
≥ Set [2 SLOTS FUNC.] to [BACKGROUND]. ( l143 )
 is displayed beside the SD card display for card 2.
(To...

- 72 -
Color Bar Screen
≥To cancel, press the BARS button again.
≥ It will be canceled when the unit is turned off.
≥ While the color bar is displayed, a test tone will be output fr om the headphone terminal, HDMI 
terminal and audio output terminal. It will not be output from  the speaker of this unit.
≥ Different color bars are displayed depending on the [BARS TYPE]  setting. (l152)
≥ The frequency of a test tone that is output when color bars are  displayed differs depending on 
[SYSTEM FREQ] and the...

- 73 -
≥The test tone volume differs depending on the [TEST TONE] setti ng. (l157)
≥ You can record color bars as motion pictures, but not as still  pictures.
≥ If you press the BARS button while recording color bars as a mo tion picture, you can stop 
displaying the color bars. To display them again, stop the reco rding and press the BARS button.
ND filter
Using the ND filter switch, you can switch the built-in optical ND filter setting. (The filter adjusts the 
amount of light.)
≥ Use this function...

- 74 -
Zebra
Zebra display:
Parts where white saturation (color saturation) is likely to occur (extremely brightly lit or shiny parts) 
are displayed with diagonal lines (zebra pattern  A).
Marker display:
Displays the luminance level of the center of the screen (lumin ance display frame B) in %.
It makes the adjustment of the brightness of the object easier,  by checking the luminance level of 
the object, when recording same object in different surrounding s.
≥ Luminance level  C is displayed between...

- 75 -
You can use convenient functions just by the easy operation of touching the screen.
1Touch the LCD monitor in the recording 
screen.
≥The operation icons are displayed.
2Touch an operation icon.≥The following function is available. Refer to the respective 
pages for the operation.
* It is not displayed in the Intelligent Auto Mode.
≥ If you touch the screen while an operation icon is being displayed or do not touch the icon for a 
certain period, it will disappear. To display again, touch the...

- 76 -
You can select and set menu items (l28), etc. using the multi-function dial.
1Rotate the multi-function dial on the menu 
screen, etc., to move the cursor.
≥The selected item will be displayed in yellow.
2Push the multi-function dial to set.
Menu operations for setting a value
When a menu that lets you set a value is displayed, select the  value display before adjusting the 
setting.
≥ You cannot select  / / /  with the multi-function dial when a scree n that lets you adjust 
a value is...

- 77 -
≥The multi-function dial also a llows you to select/set operation  icons, thumbnails, etc.
≥ Parts that are finger-touch sensitive can be operated with the  multi-function dial. (Excluding some 
functions)
You can select the following functions and adjust their settings using the multi-function dial.
You can also switch between the functions and adjust their sett ings.
(When the recording screen is displayed)
(When the playback screen is displayed)
Using the multi manual function
On-screen...

- 78 -
To change the function you adjust
1Change settings in advance so that you can select more than two  functions.
≥Change settings as follows:
≥ The on-screen icon for the selected function is displayed in wh ite. (Function Execution Mode) 
If you have selected [ ICONS], you can rotate the multi-function  dial to select an operation 
icon.
2 Push the multi-function dial.≥The on-screen icon turns yellow. (Function Selection Mode)3 Rotate the multi-function dial to select the function you want to...

- 79 -
1Set this unit to playback mode. (l22)
2Touch the play mode select icon  A .
3Select the media  C you wish to play back.
4(To set this unit to Motion Picture Playback 
Mode)
Touch the desired recording mode  D and 
recording format  E for playback.
≥ The available recording format options differ depending on 
[SYSTEM FREQ] ( l159 ) or the recording mode option you have touched.
≥ Touch [ENTER].
≥ A recording mode icon  B will be displayed on the thumbnail display. ( / / /
)
≥ (If you have touched...

- 80 -
(To set this unit to Still Picture Playback Mode)
Touch the still picture F.
5Touch the scene or the still picture to be played 
back.
≥ Next (Previous) page can be displayed by touching  / .
6Select the playback operation by touching the 
operation icon.
* When touched two times, the fast forward/fast rewind speed inc reases. (Screen display will 
change to  / .) G
Operation icon
≥ If you touch the screen while an operation icon is being 
displayed or do not touch the icon for a certain period,...