Panasonic Hc X1000 Owners Manual

- 41 -
≥Switch to Manual Focus Mode. ( l34)
≥ Register [FOCUS ASSIST] to a USER button. ( l61)
Press the USER button to which [FOCUS ASSIST] is registered or t ouch the 
applicable USER button icon.
≥ To turn off Focus Assist, perform the following operations:
jPress the USER button or touch the USER button icon again.*
jTouch [EXIT]
* You can turn off Focus Assist by  touching the USER button icon only when [FOCUS ASSIST] is 
set to [PEAKING].
∫ To adjust the magnified display
When [FOCUS ASSIST] is set...

- 42 -
≥You can adjust the magnification from 3 k to 10 k.
≥ The magnified area is displayed in full screen when the magnifi cation is set to a level between 
5.5k  and 10 k.
(Moving the magnified area)
Touch  / / /  or slide the screen while 
touching it to move the magnified area.
≥ The zoom position  C window will be displayed.
∫ To change the peaking settings
When [FOCUS ASSIST] is se t to [PEAKING] or [BOTH], 
in-focus portions are highlighted with color. (peaking  D)
≥ You can set the peaking color...

- 43 -
≥Focus Assist is canceled in following cases:
jIf you turn the unit off
j If you press the THUMBNAIL button
j When the setting of [FOCUS ASSIST] ( l40) is changed
j When EVF/LCD detail is enabled. ( l40)
j When you set this unit to Intelligent Auto Mode using the iA/MA NU switch.
j When you set the FOCUS A/M/ ¶ switch to [A]
j When you press the USER button to which [FOCUS TRANSITION] is registered or touch the 
applicable USER button icon (l 61)
≥ The magnified display and peaking are not...

- 44 -
4Touch [EXIT] to complete the setting.≥The focus positions of the items you have set will be registere d.
≥The focus position settings are canceled in the following cases :
j If you turn the unit off
j If you press the THUMBNAIL button
j If you operate the zoom
≥ Select the [FOCUS TRANSITION] menu.
 (l 43)≥Register [FOCUS TRANS] to a USER button. ( l61)
1Switch to Manual Focus Mode. ( l34)
2Press the USER button to which [FOCUS TRANSITION] is registered or touch 
the applicable USER button icon....

- 45 -
≥When using Focus Transition, functions registered to the USER buttons 1s5 do not work with the 
USER buttons.
To set the Focus Transition time≥ Switch to Manual Mode. ( l34)1 Select the menu.
2 Touch the desired setting item.
≥When [DIRECT] is set, a focus position changes as soon as Focus  Transition starts.3(If you have selected [2-15 SEC.] in Step 2)
Touch  /  to set the duration.
≥You can set a Focus Transition time of 2s15 seconds (by 0.5 second increments)
≥ Touch [ENTER]
4 Touch [EXIT] to...

- 46 -
Automatic White Balance function may not reproduce natural colors depending on the scenes or 
lighting conditions. If so, you can adjust the White Balance ma nually.
≥ Use the multi-function dial to change the settings.
≥ Switch to Manual Mode. ( l34)
1Press the W.B. button to switch to the Manual White Balance Mode.≥The White Balance mode will switch to the one you set previousl y.
2Rotate the multi-function dial to switch the White 
Balance mode.
≥The mode will be switched in the following...

- 47 -
*1 This mode is used for Auto White Balance Mode and Intelligent Auto Mode.
*2 You can set this mode with a USER button.
*3 Only displayed when Manual White Balance Mode is in use.
≥ To return to Auto White Balance Mode, press the W.B. button or  set this unit to Intelligent Auto 
Mode using the iA/MANU switch.
∫ To set ATW Lock
You can set ATW Lock by registering [ATW LOCK] to a USER button.
≥Please refer to page  61 for details about setting the USER button.
1 Set the White Balance mode to...

- 48 -
When recording a scene that is too dark (or bright) or a scene in a similar situation, manually adjust 
the iris and gain.
Iris adjustment
≥ Switch to Manual Mode. ( l34)
1Press the IRIS button to switch to Manual Iris Mode.≥  disappears.
2Adjust the iris by rotating the iris ring.
Iris value:
CLOSE !# (F11 to F1.9) !# OPEN
≥ Value closer to CLOSE darken the image.
≥ Value closer to OPEN brighten the image.
≥ To return to Auto Iris Mode, press the IRIS button or set this  unit to Intelligent Auto...

- 49 -
∫
Adjusting brightness during the Auto Iris Mode
≥Switch to Manual Mode. ( l34)1 Select the menu.
2 Touch  /  to adjust settings.
3 Touch [EXIT] to complete the setting.
Utilizing the USER button
It is convenient to use following functions of the USER button  when it is set to Iris adjustment.
≥ Please refer to page  61 for details about setting the USER button.
Gain adjustment
≥Use the multi-function dial to change the settings.
≥ Switch to Manual Mode. ( l34)
1Press the GAIN button to switch to...

- 50 -
≥To return to Auto Gain Mode, press the GAIN button or set this  unit to Intelligent Auto Mode using 
the iA/MANU switch.
≥ If you register [SUPER GAIN] to a USER button, you can set the  gain value to 27 dB or 30 dB. 
( l 50)
≥If the gain value is increased, the noise on the screen increases.
≥ In Auto Iris Mode or Auto Shutter Mode, the screen brightness m ay not change even if you adjust 
the gain. ( l48, 51 )
∫ Changing the maximum possible gain value for Auto Gain Mode
≥Switch to Manual Mode....