Panasonic Hard Disk Storage Unit Ajhrw10g Operating Instructions

41
System setting (continued)
Setting battery level warnings (Battery)
Change battery settings.
Settings can be made for two different batteries 
– Battery1 and Battery2 – which may then be selected 
as required
ABC
D
A BATTERY1 button / BATTERY2 button
Individual settings may be made.
B   Near  End
If the voltage falls below this value, an error 
message will be displayed and the final part of the 
“Power Indication” will be shown in red.
C
   End
If the voltage falls below this value, the unit will be...

42
System setting (continued)
Undoing the setting (Default)
The setting is undone.
A
B
A INITIALIZE  button
Use this to restore all the settings except the ones 
below to the factory settings.
• Network
• Battery
B   CLOSE  button
Return to the main screen.
1  To restore the settings to the factory settings, 
press the INITIALIZE button.
Bear in mind that all the settings except for Network 
and Battery will be restored to the factory settings.  

43
Maintenance
Checking HDD status (Maintenance)
The operations of the installed HDD can be checked 
on the screen which appears when the maintenance 
button on the SETTING screen is pressed.
The inserted HDD is easily damaged.
To keep the unit in optimal condition, we recommend 
that you inspect it regularly and confirm the state of the 
HDD in advance.
B
C
D
A
1  Select the HDD to check.
2  
Press the Start Test button.
    The display changes to [STOP].
The data on the entire HDD is read, and if it is...

44
Creating PASS registration data
Register as a PASS (P2 Asset Support System) 
member to use P2 Status Logger, an inspection utility 
for P2 devices. With this utility, you can check the 
software version of registered devices, update the 
software, and manage usage records. 
Prepare the latest data for checking and management 
as follows.
1  Connect the unit to a network where there is 
a computer with P2 Status Logger installed.
2   Press the LOG button at the bottom right of 
the Maintenance tab...

45
Version up
Follow the steps below to proceed with version 
updating.
1  The version update module which is 
downloaded from the Panasonic home page 
contains compressed files so unzip them.
For further details about the updating methods, 
refer to the following website.
https://eww.pavc.panasonic.co.jp/pro-av/
2  On the main screen, press the UPDATE 
button.
The following message is displayed.
3  At the time when step 2 is taken, copy 
the data which was unzipped in step 1 
into the units version...

46
Backing up the data
For Windows
 ● Using Windows Explorer
Select top-level folders and files of a displays 
drive on the unit. Copy the folder to your preferred 
target folder on the computer. Execute the same 
procedure on all drives of the unit.
 ● Using the “P2 Viewer”
Select needed clips and copy them to your preferred 
target folder on the computer, where you have 
set up the virtual drive. Refer to the P2 viewer’s 
operating instructions for details on operation.
Connecting to a computer
Network...

47
Specifications
  Power supply
   DC 12 V (11 V to 17 V)
  Power consumption
 70 W
 indicates safety information.
External IF
    LAN1/LAN2 : Gigabit Ethernet LAN port
Dimensions (W) × (H) × (D)
   368 mm × 177 mm × 303 mm
(14.49 inches × 6.97 inches × 11.93 inches)
  (Excluding protrusions)
Weight
   Approx. 6.3 kg (13.86 lb)
(excluding the HDDs and 5-inch bay units)
Operation environment
  Operating temperature:   0 °C to 40 °C
        (32 °F to 104 °F)
    Humidity:   10 % to 85 % 
  Storage...

Information for Users on Collection and Disposal of Old Equipment
and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic
products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection
points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
By disposing of...