Panasonic Hard Disk Storage Unit Ajhrw10g Operating Instructions

21
RAID Settings
The basic processing of the RAID1 function is set.
A
B
C
D
E
A   Rebuild  Rate
Set the rebuilding rate.
While the rebuilding process is underway, both 
playback and access from an external source via 
the LAN can be performed at the same time.
When rebuilding and playback or rebuilding and 
external access have been performed at the same 
time, the rate of not only the rebuilding but the 
playback or external access as well will be reduced.
For details on the rates provided by the LOW...

22
Copying
The data on the recorded P2 cards is copied onto the HDD.
The data is copied from the P2 card onto the HDD on a card by card basis or clip by clip basis (see page 27).
Use the copying method that best suits the application concerned.
Copying entire cards
Two copy modes are available when copying entire 
cards, as follows. 
• Manual copy mode:  Data is copied after inserted P2 
cards are selected. 
• Auto copy mode:    Data is automatically copied from 
inserted P2 cards.
To switch between auto...

23
Copying (continued)
Auto copy mode 
In auto copy mode, a popup screen is displayed when 
a P2 card is inserted.
A
BC
A
   Copy All  button
Copy the currently inserted card.
B
   Copy New button
Copy new cards only.
C
   Cancel  button
Return to the main screen without automatic 
copying.
In this mode, the unit detects when a card is inserted. 
If no other card is inserted within 10 seconds, data 
is automatically copied from the inserted card to the 
designated HDD.
After copying, it will copy...

24
Copying (continued)
Confirmation after copying
The results of copying can be checked on the copy 
confirmation screen displayed after copying is finished.
By pressing the CONFIRM button, the copying is 
finished, and when the FINISH button on the copy 
state display screen is pressed, a screen on which to 
confirm the previewing of the copied data is displayed.
If the YES button is pressed on the confirmation 
screen, the EXPLORE screen which displays the 
folders and icons on the HDD will appear.
If...

25
Checking the clips in P2 card/HDD
Open EXPLORE screen, you will find that data in different device displays in different ways.
A
   Device selection button (page 29)
Select the device displays in the thumbnail screen.
The selected device will be displayed on the button.
B
   SELECT ALL button / UNSELECT ALL button
Press SELECT ALL button to select all the clips in the 
same time. The display changes to [UNSELECT ALL].
When the UNSELECT ALL button is pressed, the 
selected status is cleared and the...

26
L Shot  marks
These are displayed on the clips which have been 
provided with shot marks.
The clips can be filtered depending on whether they 
are provided with shot marks or not. (page 30)
M Icons
 : Displayed for high-definition clip.
 :  Displayed if certain clips from a sequence are 
missing.
 :  This is displayed when something is wrong 
with a clip.
Clips with this mark cannot be copied or 
played back.
N CREATE  DATE
The creation time of the clip (yellow framed) where 
the cursor is positioned...

27
Checking the clips in P2 card/HDD (continued)
Copying individual clips (COPY)
This function button is not displayed when HDD is 
selected.
When the COPY button is pressed after the file has 
been selected (blue framed) on the EXPLORE screen, 
the copy destination selection screen appears.
(In the RAID1 mode)
(In the JBOD mode) 
Select the copying destination and press OK button to 
start the copying.
If Verify = ON button is set in the SETTING screen 
(page 39), it will Verify automatically after the...

28
Checking the clips in P2 card/HDD (continued)
Viewing clip properties (PROP)
When the PROP button is pressed on the EXPLORE 
screen, the properties of the clip where the cursor is 
located (yellow framed) will be displayed.
A
B
E
F C
D
A   Clip  properties
Items are displayed as follows:
 ● CLIP NAME
   Displays name of clip.
 ● START TC
   Displays time code at beginning of clip.
 ● START UB
   Displays Users Bit at beginning of clip.
 ● CREATE DATE
   Displays date of recording.
 ● CREATE TIME...

29
soft keyboard
GH A
B
C
D
E
F
A MODE
The names of the modes corresponding to the 
items are displayed here.
•  Alphanumeric characters can be inputted when 
[Character String Mode] is displayed.
•  Only numbers can be inputted when [Number 
Mode] is displayed.
B
 Input  column
Inputted alphanumeric characters are displayed.
C
   ESC  button
This restores the original Meta Data screen.
D CAPS LOCK button
This switches the letters between the upper case 
and lower case.
E
 BACKSPACE  button
This deletes...

30
Selecting clips to display (FILTER)
When the FILTER button is pressed on the EXPLORE 
screen, the combinations to be displayed on the 
thumbnail screen can be selected.
A
B
C
D
G
H
F
E
A
 ALL CLIPS button
All the clips of the displayed devices are displayed.
B
 SAME FORMAT button
  This displays only those clips recorded in the same 
format as the clip (yellow framed) where the cursor 
is positioned.
C
   SELECTED CLIPS button
This displays only the clip (blue framed) which is in 
the selected...