Panasonic Hard Disk Storage Unit Ajhrw10g Operating Instructions

Operating Instructions
Hard Disk Storage Unit
Model No.  AJ-HRW10G
Before operating this product, please read the instructions carefully and save this manual for 
future use.
VQT2C68
S0409H0 -M D
Printed in Japan
ENGLISH 

2
Read this first!
indicates safety information.
WARNING:
TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, KEEP THIS EQUIPMENT AWAY
FROM ALL LIQUIDS. USE AND STORE ONLY
IN LOCATIONS WHICH ARE NOT EXPOSED
TO THE RISK OF DRIPPING OR SPLASHING
LIQUIDS, AND DO NOT PLACE ANY LIQUID
CONTAINERS ON TOP OF THE EQUIPMENT.
CAUTION:
In order to maintain adequate ventilation, do not
install or place this unit in a bookcase,...

3
Read this first! (continued)
A rechargeable battery that is recyclable powers the product you have purchased.

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material — special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
To remove the battery
Main Power Battery (Ni-Cd / Ni-MH / Li-ion Battery)
To detach the battery, please proceed in the reverse order of the installation method described in this manual.
(Refer to page 8 for the detail.)
If a...

4
Contents
•  Microsoft and Windows are the registered trademarks of Microsoft Corporation of the United States in the United 
States and other countries.
•  Macintosh is a trademark of Apple Inc. which has been registered in the United States and other countries.
•  Core Inside and Intel Core are trademarks of Intel Corporation in the United States and other countries.
•  Other product names or corporate names in this manual are either trademarks or registered trademarks of their 
respective owners. In...

5
Standard accessories
Ferrite core × 4
  When using a LAN cable (optional), make sure 
to attach ferrite cores to the ends of the cable. 
(page 13)
Failure to attach ferrite cores could cause 
interference with nearby equipment. 
Binder × 8 (page 13) ●
●Screws x 16
  For installing the 5-inch bay units (page 9)
Front cushion x 1
  A cushion to protect the front surface when the unit is 
carried by the handle.
Always attach the cushion when moving the unit 
(page 11). ●
●
Overview
This unit is a hard...

6
Control reference guide
A Front POWER LED
Lights when the unit is ON.
When the LED goes off and the rear POWER 
switch is ON, electric power is still consumed.
Always turn the rear POWER switch OFF when the 
battery is not used.
When an external DC power supply is used, 
standby power will continue to be consumed so set 
the rear POWER switch to OFF.
B
 Front POWER button
This button is used to start up the unit and shut it 
down.
When it is at the OFF setting:
  The unit starts up when the front POWER...

7
Control reference guide (continued)
A Battery  holder
You can install the battery directly if it is compatible 
with Anton Bauer battery holders.
•  Charge the battery with the battery charger before 
using it. (For details on the charging methods, 
refer to the operating instructions concerned.)
•  When replacing the battery plate or installing the 
V-mount type adapter plate, consult your dealer.
•  When installing the battery plate, take care not to 
sandwich or pinch the connecting wires.
B Cooling...

8
Power Supply
A battery or external DC power supply can be used as 
the power supply for the unit.
Mounting the Battery
1  Mount an Anton/Bauer battery.
Anton/Bauer Battery
2  Insert the battery and slide it in the direction 
of the arrow.
Release lever
3  Set the battery type.
   Specify the type of battery on the [Battery] tab of the 
SETTING screen. (page 41)
Removing the battery
Completely push down and hold the release lever 
on the battery holder. Then, slide the battery in the 
opposite direction...

9
How to install the 5-inch bay units
Follow the steps below to install the 5-inch bay units.
5-inch bay units and HDDs sold separately. 
1  Remove the screws (x2) of the top panel, and 
remove the top panel.
2  Remove the screws (x2) at the left and right 
and also the screws (x2) at the top of the front 
panel, and remove the panel. (Total: 4 screws)
Exercise caution when removing the front panel 
since the screw at the top left in the figure above 
will catch on the transparent panel.
3  Remove the...

10
How to install the 5-inch bay units (continued)
5  Install the removed brackets on the 5-inch 
bay unit.
(Use the screws provided.)
5-inch bay unit brackets
5-inch bay unit to install
6  Insert each 5-inch bay unit on a shelf, and 
then connect the wire harnesses to the power 
connector and SATA signal connector on the 
back of the bay unit.
For connection details, refer to the operating 
instructions for the 5-inch bay units.
7  Anchor the 5-inch bay unit brackets to the 
main unit using the left and...